How to Test a Small Engine for Spark
If your small engine isn't starting, you'll need to diagnose many issues including the spark plug. This video walks you through the steps of how to test for a spark using a spark tester.
Quick Fix: How to Clean a Spark Arrestor Screen on a Small 2-Cycle Engine
This repair article will instruct you how to repair a dirty or damaged spark arrestor on your small engine.
How to Replace the Drive Shaft on a String Trimmer
Learn how to properly replace the drive shaft on your string trimmer in less than 30 minutes.
Quick Fix: How to Replace the Spark Plug in a Small Engine
This article will help you replace the spark plug on a small engine which will help get your gas powered equipment up and running again.
Fuel lines Deteriorated
Time Spent Repairing:
Entry Date:2014-06-06 10:04:16
3 of 6 customers found these instructions helpful
Fuel suction pipe dissolved in fuel tank.
Remove fuel tank and clean out thoroughly with solvent. Insert new filters A368000030 and A368000020 in A369000030 suction weight, install suction pipe on weight with original clamp. Install suction pipe in tank and attach original fuel pickup pipe. Re-install tank. Hook up fuel pickup pipe to carburetor.
Discussion for the Shindaiwa T-20 Trimmer
Post a Comment
Ask a question, answer a question, or post a comment!
I have a T-20 Shindaiwa trimmer that was running great. It started to lose power when I would lower it to the running position then it completely quit. I found the fuel pick-up tube in the tank was broken just below where it enters the tank. I replaced it thinking it would fix the problem, now it won't prime. The diaphragms in the carb appear OK but I'm not certain. I can't find any leaks in the fuel lines, also the priming button [clear plastic] doesn't seem to leak. Can you tell me what parts I need to order. Thanks in advance for your help.
Accessories for the T-20