We sell only genuine DeVilbiss ® parts.
Enter Your Model Number
This part is used in various places in the compressors listed below.
By its part name, it is used to clamp hoses onto certain parts on the compressors.
No tools are required for installation.
Part is compatible with the models listed below.
The purpose of the N044359 Tube Seal is to prevent an air leak.
It is placed on the outlet tube coming from the head of the compressor.
Head Gasket Sold Separately.
This part is used in the all of the compressors models listed below.
When air is pumped by the piston it passes through the Valve Plate into the compressor tank.
There are reeds on the valve plate that will eventually wear out, and the Valve plate will need to be replace.
It is advisable at this time to replace the Graphite Gasket Kit, part number D30139.
If it is left in the tank too long it can start to rust out the inside of the tank.
The Drain Valve should be opened up and let the water drain out.
The water will build up if you have a tendency to leave air in your tank for a long period of time.
You should drain your tank after each time it is used to prevent this from happening.