We sell only genuine Stanley ® parts.
Enter Your Model Number
Stanley Replacement Parts by Category
Circular Saw Parts
Hammer Drill Parts
Hand Saw Parts
Impact Driver Parts
Impact Wrench Parts
A Cord Strain Reliever is used on most all power tools.
It purpose is to reduce the bending of the cord as it comes out of the housing, which otherwise would cause the cord to crack and wear.
Includes 1 Carbon Brush with wire lead and brush spring attached.
• Worn brushes are often the cause of a poorly running motor
• Replacing brushes can fix an intermittent motor
• New brushes can restore a motor’s electric braking
Carbon motor brushes are one of the most commonly replaced power tool components. Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement. Worn brushes are common causes of intermittent motor function, reduced electric braking, and reduced motor power. A worn out brush will often be worn down near the wire lead and may be cracked, pitted, or burned. When replacing carbon brushes, be sure to also inspect your armature for burns, cracks, or other damage which indicates a larger motor problem.
The purpose of the N12112 is to secure the Canister Assembly to the Canister Cover Assembly, with the use of the Cover Canister Pin.
It is a good idea to check the condition of the Hinge Pin Retainer, as they do have a tendency to deteriorate over time.