We sell only genuine Ingersoll Rand ® parts.
Enter Your Model Number
Popular Categories
Ingersoll Rand Replacement Parts by Category
Ingersoll Rand Repair Articles
| How to Diagnose a Bad Power Cord or Switch | Power Tool Care and Maintenance 101 |
 |  |
| This article outlines the basics of power tool and appliance electrical diagnosis. You can use a multimeter to test... | This article suggests guidelines for power tool care and maintenance. It also describes information tools available at... |
Commonly Purchased Parts
Popular Parts
This part is an OEM direct from Ingersoll Rand. The socket retainer kit is made for use with several impact wrench devices. The kit includes one socket retainer spring and plastic seal. This item helps to secure the anvil to the hammer case. The socket retainer kit is sold individually. A pair of pliers, screwdriver and a hex wrench are often required for making the replacement. Please refer to the specific manual for further instructions.
This is a genuine OEM replacement part used with many impact wrenches. The reverse valve knob is fastened to the bushing in the motor housing assembly, assisting with the direction of the drill bit. This metal item is sold individually, and a hex key is often used for making the replacement.
The socket retainer fits between the ring and the pushing. This is made of metal and is available as an individual replacement part. It is a genuine item that is supplied by the original equipment manufacturer for use with Ingersoll Rand impact wrenches. A screwdriver may be helpful when replacing this part. It will need to be replaced if it becomes broken.
This is an authentic OEM component from Ingersoll Rand. The socket retainer kit is compatible with several impact wrenches, and composed of metal and plastic components. Sold individually, the protective socket and retainer kit is fitted into the angle assembly. Please refer to the manual for further repair instructions.
This muffler assembly is an OEM part direct from Ingersoll Rand for random orbital sanders. This part decreases the noise and the dust from the sander. It is recommended to review your models diagram to verify the parts compatibility. This part is sold pre-assembled and made of durable material.
Ingersoll Rand Repair Articles
| How to Diagnose a Bad Power Cord or Switch | Power Tool Care and Maintenance 101 |
| |
| This article outlines the basics of power tool and appliance electrical diagnosis. You can use a multimeter to test... | This article suggests guidelines for power tool care and maintenance. It also describes information tools available at... |
