Genuine OEM replacement part, this item is sold individually.
This screw is used in various places in all of the tools listed below
The most common use for this screw is to secure plastic housings together.
It has a Torx T-20 head.

Genuine Dewalt replacement part, this item is sold individually.
This screw is used in various places in all of the tools listed below
The most common use for this screw is to secure plastic housings together.
It has a Torx T-20 head.

Genuine OEM replacement part, this item is sold individually.
This spring is used in various locations of the tools listed below.
Over time springs will loose their tension and will need to be replaced.
The dimensions on this spring are 5/16 in length and 3/16 in diameter.

Genuine Dewalt replacement part, this item is sold individually.
The most popular use for the 099205-07 Roll Pin, is to secure the Detent Pin and Detent Spring in the anvils of the Impact Wrenches shown below.

Genuine DeWalt replacement part
rnIncludes 1 Carbon Brush with wire lead in rubber sheath attached.rn

• Worn brushes are often the cause of a poorly running motor
• Replacing brushes can fix an intermittent motor
• New brushes can restore a motor’s electric braking

Carbon motor brushes are one of the most commonly replaced power tool components.  Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement.  Worn brushes are common causes of intermittent motor function, reduced electric braking, and reduced motor power.  A worn out brush will often be worn down near the wire lead and may be cracked, pitted, or burned.  When replacing carbon brushes, be sure to also inspect your armature for burns, cracks, or other damage which indicates a larger motor problem.

This is a genuine Dewalt replacement part, it is sold individually.
The purpose of the Detent Pin is to secure sockets to the anvil on the Impact Wrench model numbers shown below.
It is held in the anvil by use of a spring and pin.