Watch The
Repair Video

Plastite Screw

Part Number: 330019-04

1 Reviews

Order within the next 12 hours

and your part ships today!

Questions & Answers

Repair Instructions

*This part replaces obsolete part #: and 330013-04.

Product Information

Manufacturer: DeWALT, Black and Decker, Porter Cable, Bostitch, Stanley

Product Number: 330019-04

Classification: Part

Weight: 0.01 lbs.

Shipping: Ships Worldwide

Description:

Genuine Dewalt replacement part, this item is sold individually.
This screw is used in various places in all of the tools listed below
The most common use for this screw is to secure plastic housings together.
It has a Torx T-20 head.

Warning: California's Proposition 65

Compatibility

This part is compatible with the following machines:

DeWALT

Expand the 150+ compatible machines

Products Compatibility

This item works with the following types of products:

• Cordless Drill
• Drill
• Hammer Drill
• Impact Driver
• Screwdriver

Questions & Answers

Sort by

does this come 1 screw per pack?

Bruce for model number 330019-04

Hello Bruce, thank you for your question. This Plastite Screw is sold individually. Good luck with your repair!

Did this question help you?

Will this screw fit into the mandrel's shaft of the Black and Decker RTX 3 speed rotary tool?

Peter

Hello Peter, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!

Did this question help you?

Where do I locate the model number for the Black & Decker RTX 3 speed rotary tool? Looked in every manual and could not find. Serial number in tool is 20086752.

Peter Kofsuske

Hello Peter, thank you for your question. The RTX 3 is the model number for that unit. You can see the parts list on the following link https://www.ereplacementparts.com/black-and-decker-rtx3-type-corded-rotary-tool-parts-c-4167_4332_12023.html

Did this question help you?

Need a retaining screw for my black decker trimmer

Joe for model number BEHTS300

Good Afternoon Joe. Thank you for your question in regards to your unit (Model Number BEHTS300). We were able to find two screws that go with this unit; Part Number N546037 and Part Number 747329. Hope this helps. Best Regards.

Did this question help you?

I lost the screw that holds the guard on the Cordless 12 volt Trimmer. What screw is used to replace it?

Roann for model number CST1200

Hello Roann, thank you for your inquiry. The correct screw is part number 5103541-00. I hope this information helps.

Did this question help you?

Repair Instructions: Submitted by Customers Like You

2 of 2 people found this instruction helpful

Tool Type:

Hedge Trimmer

Parts Used:

Plastite Screw - 330019-04

Bail Handle - 478789-00

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver

Replace hedge trimmer handle

Very simple.
Line up handle with trimmer
Screw in the screws
3 minutes maximum

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Hedge Trimmer

Parts Used:

Plastite Screw - 330019-04

Switch - 90541380

Repair Difficulty:

Easy

Time Spent Repairing:

30-60 minutes

Tools Used:

Screwdriver, Power Drill, None.

The hedge trimmer motor quit working when attached to an electrical resource

*Remove all the screws from the external casing.
*With a small screw driver pry the old switch off of the two plastic prongs that hold the old switch in place. This is a delicate process for you do not want to break of the plastic prongs.
*Detach the two electrical wires that connect to the old switch
*Reattach these two wires to the new switch.
Reinsert the new switch onto the plastic prongs
Re-insert all casing screws.
Task completed.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Reciprocating Saw

Parts Used:

Plastite Screw - 330019-04

Clamshell Set - 613840-00

Carbon Brush with Wire Lead and Terminal - 387558-01

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver

handle broken.

Replaced clam shell and (1) brush.
Simple remove all screws with a T10 Torx driver.
Reuse switch. Installed brush. ( Attached wire on brush was broken when handle failed.)
Replace with new parts. SIMPLE

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Hedge Trimmer

Parts Used:

Plastite Screw - 330019-04

18-Inch Blade - 152617-01

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, Torx #5 screwdriver

The blade had become badly worn and chewed up. Could not be sharpened any further

Very simple -
Removed the top handle and blade protector. Removed screws and slipped off.
Removed screws holding the casing, and exposed the blade.
Removed screws holding blade to motor and then removed the blade.
(The blade is one inclusive unit)
Reattach the blade being certain to align with the rotor that moves the scissors back and forth. Had to adjust the blades to line up just right.
Reattach housing, I bought new screws for this.
Reattach the blade protector.
Reattach the handle.
Ready to go.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Trimmer

Parts Used:

Plastite Screw - 330019-04

Blade - 243805-00

Screw - 681914-00

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver

Line blade fell off

Used screw to reattach lost blade on trimmer. Also replaced lost housing screw.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Hedge Trimmer

Parts Used:

Plastite Screw - 330019-04

Bail Handle - 478789-00

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver

Bail handle would not stay in place.

1. Removed the old bail handle (had some wear).
2. Installed the new one.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Grass Trimmer

Parts Used:

Plastite Screw - 330019-04

Switch - 90541381

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, torx driver

On-off switch broke

Removed several screws to take apart housing and replaced faulty switch.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Trim Saw

Parts Used:

Plastite Screw - 330019-04

Clamshell Set - 613840-00

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver

Clam shell handle of saws-all broke and lost screw

Removed old. Took out trigger assembly and placed in new handle. Reassembled clam shell handle using old screws and new one.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Trim Saw

Parts Used:

Torx Screw - 682211-00

Plastite Screw - 330019-04

Clamshell Set - N104712

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver

Broken handle on recripicating saw

With battery removed, I Removed the screws
Then separated and removed clam shell handle
Careful To disconnect /remove trigger and elects out of handle
Attached 1/2 handle (not the side you put the screws in) to body
Added elects placed other half on handle
Watch wires, don't pinch squeeze together check elects and overall fit
Screw together. Enjoy!

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Cordless Drill

Parts Used:

Screw - 448269-00

Plastite Screw - 330019-04

Clamshell Set - 613840-00

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver

Clamshell set broke

Remove the screws from the handle housing
Remove all of the parts in the broken housing
Install them into the into the new housing
Replace the handle housing

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Reviews

Average Rating (out of 5):

1 Reviews

Click to filter by ratings:

5 stars

4 stars

3 stars

2 stars

1 stars

Sort by:

Highest Rating
Most Recent

< PREV

NEXT >

Perfect replacement

It was the correct part and worked.

Guest - June 18, 2019 Verified Purchase

Verified Purchase

eReplacementParts Team

Sort by:

Highest Rating
Most Recent

< PREV

NEXT >

Product Information

Manufacturer: DeWALT, Black and Decker, Porter Cable, Bostitch, Stanley

Product Number: 330019-04

Classification: Part

Weight: 0.01 lbs.

Shipping: Ships Worldwide