eReplacementParts.com
877-346-4814
DeWALT Parts
Preferred Partners of
Repair Parts Home  Power Tool Parts  DeWALT Parts  N020802 Detent Pin
Grid squares measure 1x1 inch

Detent Pin

Part Number: N020802
DeWALTBlack and Decker
Availability: 15 in stock
Price: $4.69
Ships within 1 business day
Product Information
Manufacturer: DeWALT, Black and Decker
Product Number: N020802
Classification: Part
Weight: 0.01 lbs.
Shipping: Ships Worldwide
Description:
This is a genuine Dewalt replacement part, it is sold individually.
The purpose of the Detent Pin is to secure sockets to the anvil on the Impact Wrench model numbers shown below.
It is held in the anvil by use of a spring and pin.
Frequently Purchased With
Compatibility

This part is compatible with the following machines:

DeWALT
Black and Decker
Expand the 70 compatible machines
Products Compatibility

This item works with the following types of products:

  • • Drill
  • • Electric Drill
  • • Impact Driver
  • • Impact Wrench
Questions & Answers

No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
1 of 1 people found this instruction helpful
Tool Type:
Impact Wrench
Parts Used:
Detent Spring - 038769-00
Roll Pin - 099205-07
Detent Pin - N020802
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Pliers, A ball peen hammer and punch
Sockets wouldn't stay on
Punched out the roll pin and removed worn spring and detention pin and replaced roll pin, you need a good set of pliers to hold everything so you can replace the roll pin.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Impact Driver
Parts Used:
Detent Spring - 038769-00
Roll Pin - 099205-07
Detent Pin - N020802
Repair Difficulty:
Hard
Time Spent Repairing:
More than 2 hours
Tools Used:
Power Drill, Pin punch and roll pin punch
roll pin wore and detent pin and spring fell out and was lost
Ruined a roll pin punch and a pin punch trying to remove the wore roll pin. Soaked it in Kroil oil for several days and finally got it to come out. After the old roll pin was out, the new parts were easily installed.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Impact Driver
Parts Used:
Detent Spring - 038769-00
Roll Pin - 099205-07
Detent Pin - N020802
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Pliers, Hammer to put in roll pin
Detent ball was missing, wouldn't hold sockets in place
Cleaned the impact driver shaft, installed spring then detent pin, held in place with vice grips put in roll pin to hold in place. Repair was done and works like new.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Impact Driver
Parts Used:
Detent Spring - 038769-00
Roll Pin - 099205-07
Detent Pin - N020802
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Pliers, Hammer, punch, grinder
Roll pin fell out and allowed detent pin to fall out from anvil on dewalt 1/2 impact, spring flying into the distance, then i lost the detent.
Cleaned hole
Inserted spring then detent pin
held pin and spring with vice grips
hammer in roll pin
because roll pin was not perfectly round it wouldn't seat all the way, so grind off excess to allow socket to slide past
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Impact Wrench
Parts Used:
Detent Spring - 038769-00
Detent Pin - N020802
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, Hammer and nail set
Missing parts
1. Tap the roll pin half way out with a hammer and a nail set with the smallest point.
2. Install the detent spring.
3. Install the detent pin.
4. Holding the detent pin down. Tap the roll pinback in place.
Done.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Impact Wrench
Parts Used:
Detent Spring - 038769-00
Roll Pin - 099205-07
Detent Pin - N020802
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Pliers, vise, 2mm pin punch
Socket kept falling off electric impact tool
Hardest part was finding the correct pin punch to remove what was left of the 2mm soll pin that keeps the detent and spring in. Didn't have one so had to make one. After that was easy repair. Once again a pleasure to use my old Black and Decker "Professional" Electric Impact gun, without the socket falling off and rolling under the car. I've had it for nearly forty years and it still works great!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Impact Wrench
Parts Used:
Detent Spring - 038769-00
Roll Pin - 099205-07
Detent Pin - N020802
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, Needle nose vise grip, hammer, vise, drift pin
Rounded detent pin. Impact wrench not holding sockets
Knockout old pin with hammer and drift pin until able to grab with needle nose vise grip to remove completely
Remove old spring and detent
Install new pin until slightly before detent hole [grab pin with needle nose vise grip and hammer in]
Insert new spring and new detent[keep only the crown of detent above anvil]
Using a vise, squeeze pin all the way in. [C clamp can be used instead of a vise]
Using a drift pin tap pin in until flush with anvil
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Impact Wrench
Parts Used:
Detent Spring - 038769-00
Roll Pin - 099205-07
Detent Pin - N020802
Repair Difficulty:
Easy
Time Spent Repairing:
30-60 minutes
Tools Used:
, Hammer, drift, welding clamp small
Broke retention pin
Removed rolled pin, replaced old parts, used small welding clamp to compress spring and inserted new rolled pin.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Impact Wrench
Parts Used:
Detent Spring - 038769-00
Detent Pin - N020802
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Small hammer
Needed socket pin and spring
Installed parts in less than 5 minutes, work great.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Impact Wrench
Parts Used:
Detent Spring - 038769-00
Roll Pin - 099205-07
Detent Pin - N020802
Repair Difficulty:
Medium
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Pliers, Brass hammer
Detent pin that holds sockets in place
1. Started roll pin in its hole with hammer.
2. Placed detent spring and the detent pin in place.
3. Held detent pin in and used pliers to squeeze roll pin in place.
4. You may have to tap roll pin flush with surface of 1/2 socket holder..
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
5
Average Rating (out of 5):
1 Reviews
Click to filter by ratings:
5 stars
1
4 stars
0
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Fast and easy repair
    Arrived on time good fit
    Bob - August 16, 2019 Verified Purchase
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    NEXT >
    Product Information
    Manufacturer: DeWALT, Black and Decker
    Product Number: N020802
    Classification: Part
    Weight: 0.01 lbs.
    Shipping: Ships Worldwide

    Fixing things makes sense...

    ...And we make it easy! With our Fix app, you always have a personalized repair guide on-hand. Easily find manuals and replacement parts on your phone while you’re DIYing in the garage or garden.

    "Love the flexibility of the app to add everything in the home and garage. Access to manuals and parts right there makes it convenient."

    Available on the App Store Get it on Google Play
    eReplacementParts.com
    7036 South High Tech Dr.
    Midvale, UT 84047
    visa mastercard discover american express PayPal