OEM Black and Decker Impact Driver Parts & Accessories

$5.95

Manufacturer Part Number:: 696631-00

Genuine Dewalt replacement part, this item is sold individually. The 696631-00 Steel Ball is part of the chuck assembly of the Impact Drivers shown below. When you pull back the sleeve of the chuck assembly and insert your bit, the Steel Ball is the part that locks the bit in the chuck assembly. In the Screw Drivers listed below this is the part that secures the Bit Holder in the spindle.

Power Cord (8-foot)

★★★★★

(2)

$31.41

Manufacturer Part Number:: 330077-98

This cord is a genuine DeWalt replacement part and is sold individually. It is constructed with tough, thick outer rubber insulation for a long service life. Power Cord Specifications: • 2 Prongs • 2 Wires • 18 Gauge • 8 Feet Long

Roll Pin

★★★★★

(1)

$5.95

Minimum Quantity of 2 required

Manufacturer Part Number:: 099205-07

This is an original Craftsman replacement part sourced directly from the manufacturer. The roll pin is found in impact wrenches and multi-purpose saws from Craftsman. This metal part is used as a fastener to hold components together, and may be found in different parts of the machine depending on model. Please refer to the parts diagram to be sure of ordering the correct part. You may require ...

Impact Wrench Anvil Assembly

★★★★★

(3)

$72.58

Manufacturer Part Number:: 627238-00SV

This anvil assembly is for impact wrenches. The anvil assembly is the output shaft that drives the socket. The assembly may include multiple parts; refer to your parts diagram for a complete list of parts included. Disconnect the impact wrench from the power source before installing this part. Wear work gloves to protect your hands.

Carbon Brush With Spring

★★★★★

(10)

$11.43

Manufacturer Part Number:: 450374-12

Genuine OEM replacement This brush is sold individually, 2 are needed for most every electric power tool It is always best to replace both brushes, even if only one is worn. Worn brushes frequently are the cause behind a motor running poorly. Replacing brushes can fix a motor that's operating intermittently. New brushes can restore a motor's electric braking. Carbon brushes are one of the...

Cord Protector

★★★★★

(1)

$5.95

Manufacturer Part Number:: 148809-00

This is a genuine OEM sourced replacement part designed for use with a variety of power tools. Cord guards, also called cord protectors, are designed to slide onto your cord and fit securely at the end, where it's firm rubber will protect the base of the cord from getting bent and pinched, which can expose the wires and become a safety hazard. It is made out of rubber and it is sold individually.

Ring,spring

$5.95

Manufacturer Part Number:: 086947-00

It is a genuine item that is supplied by the original equipment manufacturer for use with DeWALT, Black and Decker and Porter Cable impact wrenches. This is the special ring spring that is secured on the anvil, unfortunately, over time it will wear out, it may get damaged or lost eventually requiring a replacement. Make sure to check the diagrams of your model for the correct location and applicat...

Detent Spring

★★★★★

(5)

$5.95

Minimum Quantity of 2 required

Manufacturer Part Number:: 038769-00

Genuine OEM replacement part, this item is sold individually. This spring is used in various locations of the tools listed below. Over time springs will loose their tension and will need to be replaced. The dimensions on this spring are 5/16 in length and 3/16 in diameter.

Brush Holder

$10.63

Manufacturer Part Number:: 616857-00

This is a genuine manufacturer sourced replacement brush holder is generally used with Dewalt as well as Black and Decker power tools. This item secures the carbon brush around the armature to provide stable physical contact. This holder is made out of plastic with metal and it is sold individually. Please note, carbon brushes are sold separately. To replace this assembly you would need a screwdr...

Detent Pin

★★★★★

(3)

$5.95

Minimum Quantity of 2 required

Manufacturer Part Number:: N020802

This is a genuine Dewalt replacement part, it is sold individually. The purpose of the Detent Pin is to secure sockets to the anvil on the Impact Wrench model numbers shown below. It is held in the anvil by use of a spring and pin.

Denton Pin Kit

★★★★★

(2)

$5.95

Minimum Quantity of 2 required

Manufacturer Part Number:: 94783-00

This detent pin kit is designed for your impact wrench and includes the detent, spring, and retainer pin. It is specifically designed to work with a 1/2-inch drive. These components collaborate to securely hold sockets or attachments onto the anvil, preventing them from disconnecting during operation. Typically, these parts are situated within the anvil assembly of the impact wrench. If you notice...

Carbon Brush With Lead

★★★★★

(5)

$9.63

Manufacturer Part Number:: 655213-02

Genuine DeWalt replacement part rnIncludes 1 Carbon Brush with wire lead in rubber sheath attached.rn • Worn brushes are often the cause of a poorly running motor • Replacing brushes can fix an intermittent motor • New brushes can restore a motor's electric braking Carbon motor brushes are one of the most commonly replaced power tool components. • Because carbon brushes are wear it...

Black and Decker Impact Driver Parts

Top Black and Decker Impact Driver Models

Popular Black and Decker Impact Driver Parts

Black and Decker Impact Driver Models

Black and Decker Impact Driver Parts

Search By Model or Part Number

Top Black and Decker Impact Driver Models

Popular Black and Decker Impact Driver Parts

Black and Decker Impact Driver Models