Detent Spring

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

, Small hardened punch, hammer.

Detent spring uas broken

Drove out roll pin with a punch, install new parts.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Impact Driver

Parts Used:

Repair Difficulty:

Hard

Time Spent Repairing:

More than 2 hours

Tools Used:

Power Drill, Pin punch and roll pin punch

roll pin wore and detent pin and spring fell out and was lost

Ruined a roll pin punch and a pin punch trying to remove the wore roll pin. Soaked it in Kroil oil for several days and finally got it to come out. After the old roll pin was out, the new parts were easily installed.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Impact Driver

Parts Used:

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Pliers, Hammer to put in roll pin

Detent ball was missing, wouldn't hold sockets in place

Cleaned the impact driver shaft, installed spring then detent pin, held in place with vice grips put in roll pin to hold in place. Repair was done and works like new.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Impact Driver

Parts Used:

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Pliers, Hammer, punch, grinder

Roll pin fell out and allowed detent pin to fall out from anvil on dewalt 1/2 impact, spring flying into the distance, then i lost the detent.

Cleaned hole
Inserted spring then detent pin
held pin and spring with vice grips
hammer in roll pin
because roll pin was not perfectly round it wouldn't seat all the way, so grind off excess to allow socket to slide past

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Impact Wrench

Parts Used:

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

, Hammer and nail set

Missing parts

1. Tap the roll pin half way out with a hammer and a nail set with the smallest point.
2. Install the detent spring.
3. Install the detent pin.
4. Holding the detent pin down. Tap the roll pinback in place.
Done.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Impact Wrench

Parts Used:

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Pliers, vise, 2mm pin punch

Socket kept falling off electric impact tool

Hardest part was finding the correct pin punch to remove what was left of the 2mm soll pin that keeps the detent and spring in. Didn't have one so had to make one. After that was easy repair. Once again a pleasure to use my old Black and Decker "Professional" Electric Impact gun, without the socket falling off and rolling under the car. I've had it for nearly forty years and it still works great!

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Impact Wrench

Parts Used:

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

, Needle nose vise grip, hammer, vise, drift pin

Rounded detent pin. Impact wrench not holding sockets

Knockout old pin with hammer and drift pin until able to grab with needle nose vise grip to remove completely
Remove old spring and detent
Install new pin until slightly before detent hole [grab pin with needle nose vise grip and hammer in]
Insert new spring and new detent[keep only the crown of detent above anvil]
Using a vise, squeeze pin all the way in. [C clamp can be used instead of a vise]
Using a drift pin tap pin in until flush with anvil

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Impact Wrench

Parts Used:

Repair Difficulty:

Easy

Time Spent Repairing:

30-60 minutes

Tools Used:

, Hammer, drift, welding clamp small

Broke retention pin

Removed rolled pin, replaced old parts, used small welding clamp to compress spring and inserted new rolled pin.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Impact Wrench

Parts Used:

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver, Small hammer

Needed socket pin and spring

Installed parts in less than 5 minutes, work great.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Impact Wrench

Parts Used: