Repair Parts Home HVAC Parts Master Parts Master Heater Parts

We Sell Only Genuine Master Parts.

Master MH135TKFA Kerosene/Diesel Parts

Search within model

Questions & Answers

Fig #

Drain Valve

$3.49

Part Number:70-002-0105

In Stock, 25+ available

$3.49

Fuel Gauge Assembly

$9.30

Part Number:70-007-0215

In Stock, 1 available

$9.30

Fuel Filter Assembly

$12.79

Part Number:70-003-0200

In Stock, 25+ available

$12.79

Fuel Cap

$6.98

Part Number:70-006-0125

In Stock, 25+ available

$6.98

Power Cord

$12.79

Part Number:70-034-0205

In Stock, 6 available

$12.79

Power Switch

$4.65

Part Number:70-038-0100

In Stock, 14 available

$4.65

Window Display

$3.49

Part Number:70-040-0100

Ships in 1 - 23 business days

$3.49

Thermostat Control Knob

$5.81

Part Number:70-031-0100

Discontinued

Air Line

$5.81

Part Number:70-035-0300

Discontinued

Thermostat Limit Control

$3.49

Part Number:70-019-0100

Ships in 1 - 23 business days

$3.49

Combustion Chamber Assembly

$102.33

Part Number:70-011-0300

Backorder: No ETA

Photocell Bracket

$3.49

Part Number:70-010-0101

In Stock, 2 available

$3.49

Fuel Line

$5.81

Part Number:70-036-1020

In Stock, 9 available

$5.81

Photocell Assembly

$12.79

Part Number:70-016-1000

Discontinued

Burner Head

$18.60

Part Number:70-014-0301

Discontinued

Nozzle Kit

$36.05

Part Number:70-015-0300

In Stock, 5 available

$36.05

Spark Plug Kit

$12.79

Part Number:70-052-0200

In Stock, 7 available

$12.79

Motor and Pump Assembly Obsolete - Not Available

$0.00

Part Number:70-020-0555

Not Available for Retail Sale

Square Motor - 120V 60HZ 2.15A 160W

$125.58

Part Number:70-021-0510

In Stock, 1 available

$125.58

Pump Body

$30.23

Part Number:70-020-0101

In Stock, 2 available

$30.23

Roto Kit

$53.36

Part Number:70-022-0100

In Stock, 19 available

$53.36

End Pump Cover

$23.26

Part Number:70-020-0102

In Stock, 19 available

$23.26

Filter Kit

$17.44

Part Number:70-054-0100

In Stock, 15 available

$17.44

Lint Filter Obsolete - Not Available

$0.00

Part Number:70-054-0102

Not Available for Retail Sale

Filter Kit

$17.44

Part Number:70-054-0100

In Stock, 15 available

$17.44

Intake Filter Obsolete - Not Available

$0.00

Part Number:70-054-0101

Not Available for Retail Sale

End Filter Cover

$12.79

Part Number:70-020-0103

In Stock, 6 available

$12.79

Plug/Pump Adjustment Kit

$2.99

Part Number:70-055-0100

Discontinued

Nipple

$4.65

Part Number:70-014-0104

In Stock, 2 available

$4.65

Capacitor

$23.26

Part Number:70-020-0201

In Stock, 3 available

$23.26

Fan Assembly

$16.28

Part Number:70-024-0300

Discontinued

Ignitor

$66.28

Part Number:70-037-0350

In Stock, 25+ available

Note: The Adapter Part Number To Connect The New Ignitor To The Old Board Is 70-037-5000

$66.28

Fan Guard

$12.79

Part Number:70-016-0200

Ships in 1 - 23 business days

$12.79

Main PCB Assembly

$60.47

Part Number:70-027-0300

Discontinued

Fuse

$2.33

Part Number:70-027-0101

In Stock, 11 available

$2.33

Clip Nut

$2.03

Part Number:70-001-0106

In Stock, 8 available

$2.03

Storage Box

$7.56

Part Number:70-053-0100

Ships in 1 - 23 business days

$7.56

Bushing Grommet Obsolete - Not Available

$1.38

Part Number:70-017-0100

Discontinued

Socket Cover

$1.01

Part Number:70-030-0100

Ships in 1 - 23 business days

$1.01

Air Pressure Gauge

$18.60

Part Number:70-025-0100

In Stock, 3 available

$18.60

Cord Bushing

$2.33

Part Number:70-033-0200

Ships in 1 - 23 business days

$2.33

Electric Outlet

$7.62

Part Number:70-029-0100

In Stock, 7 available

$7.62

Front Handle

$36.05

Part Number:70-042-0100

In Stock, 2 available

$36.05

Rear Handle Obsolete - Not Available

$0.00

Part Number:70-043-0105

Not Available for Retail Sale

Wheel Support Frame

$49.50

Part Number:70-041-0700

Discontinued

Wheel Axle

$11.63

Part Number:70-041-0115

In Stock, 2 available

$11.63

Wheel (Pneumatic) Obsolete - Not Available

$31.82

Part Number:70-041-0150

Discontinued

Wheel Nut Obsolete - Not Available

$0.00

Part Number:70-041-0550

Not Available for Retail Sale

Hardware Kit

$4.65

Part Number:70-056-0210

Discontinued

Cord Wrap

$4.65

Part Number:70-032-0200

In Stock, 1 available

$4.65

Motor Supporter Obsolete - Not Available

$0.00

Part Number:70-020-0610

Not Available for Retail Sale

Miscellaneous Parts

Fig #

A-23

Roto Kit

$53.36

Part Number:70-022-0100

In Stock, 19 available

$53.36

Search within model

Questions & Answers

Discuss | Repair Videos

Popular Parts

$6.98

$17.44

$3.49

$12.79

$12.79

$53.36

$12.79

$5.81

Accessories

Accessories for the Master MH135TKFA

Questions & Answers

Sort by

ineed a part number for the cone that heats up in th nose of the heater and price ?

dan for model number mh135tkfa asked on 2019-10-08

Hello Dan, thank you for your inquiry! The part you described does not appear in the parts list for this model. Please reach out to Master directly to obtain the part number you need to order. Once you have this information, please feel free to check back with us for pricing and availability information. Thank you.

Did this question help you?

It is sputtering and fire is coming out about 6 inches when turned on ! Was in garage all summer ! Wondering what it could be ? Filters maybe or anything else to check for. Thank you

Dale Theilan for model number MH-135-T-KFA asked on 2019-10-14

Hi Dale, this could be caused by a dirty Input, output or lint filter. Dirty fuel filter or poor quality of fuel or PSI is too high or too low. Thank you for your question and good luck with your repair!

Did this question help you?

WHY DOES IT LET FUMES OUT IN ROOM HOW CAN CONTROL FUMES?

ralph for model number MH135T-KFA 135 BTU asked on 2019-11-13

Hello, Ralph and thanks for writing. These heaters are not designed to be in closed rooms. ENTILATIONRisk of indoor air pollution. Use heater only in well-ventilated areas. Always provide a fresh air opening in the heated space of at least three square feet (2,800 sq. cm) for each 100,000 BTU/Hr. of heater output. Provide a larger opening if more heaters are being used. As an example, an MH-215T-KFA heater will require:- a two-car garage door open 6 inches, or- a single car garage open 9 inches, or- two thirty-two inch wide windows open fifteen inches. We have attached the link to the manual. We hope this helps. Please contact us anytime. https://www.manualslib.com/manual/628716/Master-Mh-45-Kfa.html?page=7#manual We hope this helps. Please contact us at any time

Did this question help you?

I'm getting error 1. It is full of fuel. Not firing up. Sat all summer. Just trying it for first time this fall. No luck

Mark for model number Mh135t kfa asked on 2019-11-13

Hello and thanks for writing. Error 1 1. No kerosene in fuel tank 2. Incorrect pump pressure 3. Corroded Spark Plug or incorrect plug gap .4. Dirty Fuel Filter 5. Dirty Nozzle 6. Moisture in Fuel/Fuel Tank7. Improper electrical connection between transformer and Circuit Board8. Ignitor Wire not connected to Spark plug . 9 defective ignitor We have attached the link to the manual for the solutions to this error. https://www.manualslib.com/manual/628716/Master-Mh-45-Kfa.html?page=15#manual We hope this helps. Please contact us at any time

Did this question help you?

What are the dimensions of this part Air pump

Edward for model number MH-75 t- kfa asked on 2019-11-18

Hi Edward, sadly we do not have this information on hand. I recommend contacting the manufacturer directly. Thank you for your question and good luck with your repair!

Did this question help you?

I have 2 wires to ignition block on motor missing part

Lee for model number MH135TKA asked on 2019-11-22

Good Day Lee. Thank you for your question in regards to your unit (Model Number MH135TKA). Are you referring to the Connection Adapter (Part Number 70-037-5000)? Best Regards.

Did this question help you?

My Master kerosene Heater 1350 BTU is loosing air pressure what part could this be that needs to replaced or trouble shoot problem

Crystol Stallings for model number Mh135TKFA asked on 2019-12-15

Hi Crystol and thank you for contacting us Things to check that can cause this are that the air and fuel filter are clean. Check the air hose for cracks and holes as well as the air pump rotor. If you need to replace the air pump rotor, you must set the proper gap at the top of the carbon rotor. To do this have the rotor in place and the outer steel ring lose, then place a .004 inch gauge between the top of the rotor and the bottom of the outer ring then tighten the bolts in the steel ring. Rotate the air pump rotor clockwise and recheck the .004 inch air gap every 1?4 turn from the same top location. Reset the outer ring if any locations are less than .004 inch. If everything is working and you have fuel pressure and proper air then it could be a faulty ignitor or a bad control board. Remove the igniter wires from the control board then check for voltage on the control board using a multimeter. The voltage has to be checked within 1 ? 3 seconds of turning the heaters on/off switch to the on position. The voltmeter should read 120 volts AC. If there is no voltage, replace the control board. If voltage is present on the control board, then more than likely your igniter is likely the issue and you will need to replace it. I hope this helps and good luck with your repair.

Did this question help you?

Could you tell me my problem with the heater when starting up I get a lot of white smoke but unit doesn't start

Greg for model number Mh135 tkfa asked on 2020-02-21

Hi Greg, Thank you for your question. If there is poor combustion and excess soot production, you may either be using a poor quality fuel, the PSI is either too high or too low or you may have either a dirty input, output, lint filter or fuel filter. You will need check the heater and verify which one of these issues is causing the symptoms that you are describing. We hope this helps. Thank you and have a great day.

Did this question help you?

I but new filters in and the heater like starts and stops put the motor keeps running it's kind of like it doesn't want to ignite any ideas

Greg for model number Master 135t asked on 2020-02-24

Hello and thank you for writing. It certainly sounds like it could be a faulty ignitor 70-037-0350 you should check the part(s) for signs of damage and replace the part(s) as needed. We hope this helps. Please contact us anytime if you require further assistance.

Related Parts: Ignitor

Did this question help you?