Repair Parts Home Power Tool Parts Skil Parts Skil Jig Saw Parts
Skil 4390 (F012439000) Orbital Cut Jigsaw Parts
How to Diagnose a Bad Power Cord or Switch
This article outlines the basics of power tool and appliance electrical diagnosis. You can use a multimeter to test tool and appliance cords and switches, the two parts usually responsible for electri...
Power Tool Care and Maintenance 101
This article suggests guidelines for power tool care and maintenance. It also describes information tools available at eReplacementParts.com.
Discussion for the Skil 4390 (F012439000) Orbital Cut Jigsaw
Post a Comment
Ask a question, answer a question, or post a comment!
Question: Skil Jig Saw Replace Retaining B...
I steped on my jig saw and broke the pin on the retaing bracket. How do I take apart my saw to replace it. It is a skil 4390.
Reply: Skil Jig Saw Replace Retaining B...
The saw is a clam shell design..so it separates in two pieces..you will have to remove all the screws and then carefully separate keeping the majority of the parts contained in one side..
However, most of the internal parts are not available..so be sure and check the parts list first and then proceed from there..:)
hope this is helpful..?
Skil 4390 Parts List and Diagram - (F012439000) : eReplacementParts.com
Question: Skil Jig Saw Repair
i have a skil 4390 jig saw. i used it twice and now it won't work. the motor runs but the blade will not move. it moves if i tap on it hard, but then just gets stuck a couple seconds later. can anyone help me on what may be wrong with it
Reply: Skil Jig Saw Repair
Your jigsaw could have some kind of gear problem or maybe something is broken inside. Unfortunately Skil doesn't offer replacement internal parts for the 4390 jig saw. If the saw is new you can probably get it replaced under warranty at your local Skil service center. Here's a link to Skil's service information web page:
link removed Power Tool Service Centers
Accessories for the 4390