eReplacementParts.com
877-346-4814
Repair Center
Preferred Partners of
Repair Center
  How to Remove a DeWALT Miter Saw Armature Bearing

Video

Tools & Materials

  • a vise
  • a Dremel tool
  • a bearing separator
  • a bearing puller
  • needle nose pliers

Safety Guidelines

  • Wear safety eyewear for this repair.

How to Remove a DeWALT Miter Saw Armature Bearing

Armature bearings must be removed from electric tool armatures for numerous repair reasons, and because each armature design is just a little different, removal steps vary between tool brands and models.
Most armature bearings are easily removed with a specialized tool for tool repair called a bearing puller. DeWALT Miter Saw armatures present a special case where simply using a bearing puller isn't enough to get the bearing off.

Disassembled DeWALT Miter Saw Most DeWALT miter saw armatures are designed with the armature bearings very close to the armature fans. The space between the bearing and the fan usually isn't enough for a bearing puller to get a good enough grip. Also, the fan is too close to an adjoining snap ring for both the fan and the bearing to be pulled at once.

DeWALT Miter Saw Armature To compensate for this difficulty, the armature bearing must be carefully scored with a multi-tool and then broken in a vise to remove its outer race. The inner race can then be removed with a bearing separator and a a bearing puller.   Steps for this Armature Bearing Removal
  1. Gently secure the miter saw armature in a vise and use a multi-tool to carefully score two opposite sides of the armature bearing. (Wear eye protection for this and other steps)
  2. Remove the armature from the vise, and reposition it so that the vise grips only the armature bearing.   3. With one hand on the body of the armature and the other hand on the vise lever, use some elbow grease to break the outer race off of the armature bearing, which will pop and then fall to the floor when it breaks.

Parts of a Bearing
  4. Remove the armature from the vise again, and again gently secure its body in the vise. Use a pair of needle nose pliers to remove the bearing balls and bearing cage from the inner race of the bearing.    5. To remove the inner race of the bearing from the armature, both a bearing separator and a bearing puller must be used. First, affix a bearing separator to the inner race of the armature bearing.   6. Reinsert the armature shaft screw that was previously unscrewed from the armature during the miter saw's disassembly.   7. Affix a set of bearing pullers to the bearing separator.    8. Now that the bearing pullers are attached to the bearing separator (which is attached to the inner race of the armature bearing), operate the bearing pullers to pull all three items off of the armature. [Back to top]
  Conclusion Visit our DeWALT Miter Saw Parts page to get started with your armature bearing repair. For help with other technical questions on this repair, view this article's demonstration video or visit our Tool Repair Forum for expert advice.     [Back to top]
What we're about.

Organize Your Home in a Snap!

The Fix App makes it easy to manage all your stuff in one place. Just snap a photo and we'll find and store your user manuals, receipts, and product information in one easy-to-find place!

"Like magic. I took a picture of the model number on my refrigerator, and the app identified it right away ... Very convenient. I'm impressed."
★★★★★ -Clever Jeff ★★★★★

eReplacementParts.com
7174 South 400 West
Suite 5
Midvale, UT 84047
visa mastercard discover american express PayPal
Recent searches:
Suggested searches:
Models:
Manufacturers:
Need help finding your model number?