We sell only genuine Speed Queen ® parts.
Enter Your Model Number
This is an OEM part from KitchenAid. This assembly is used in all tilt head KitchenAid stand mixers. The Assembly comes with Lever, Link, and Latch. This part locks the head into place while mixing. This part should be replaced when the mixer head won’t lock into place. This part can be replaced once the Motor Housing is removed from the Lower Gearcase. A Philips head screw holds the lever in place while a Flat head set screw act as a hinge for the Latch.
• Flat head screwdriver
• Philips head screwdriver
This is an OEM replacement part for Whirlpool Dryers and selected model Dishwashers. The Valve coil opens the gas valves while the dryer is running. This part is needed when the dryer may or may not heat, as coils go bad drying times get longer. Includes 2 coil valves, refer to your correct model for all other corresponding parts. You will need a Small flat head screwdriver or putty knife and also a Phillips screwdriver to replace this coil valve.
This is a genuine item which is supplied directly from the original equipment manufacturer for use with Whirlpool Dryers. The drum belt attaches to the motor pulley and spins the drum as the motor rotates. If your dryer is screeching, whining and makes noise as it tumbles or the belt is broken and will not tumble then you will need to replace the multi rib belt. You will need a 5/16 nut driver and a putty knife to replace the multi rib belt
This is an authentic OEM part. The Whirlpool drum glide is constructed of plastic, and is made for use with many dryer appliances. This item is fastened to the front bulkhead of the dryer, helping the dryer to run smoothly. A screwdriver and a putty knife are needed for the removal and installation. The drum glide is sold individually.
This is an authentic replacement part which is supplied by the original manufacturer. The drum support is designed for use with Maytag, Admiral, Speed Queen and Amana dryers. The purpose of this component is to support the drum. It is an identical replacement for a damaged or a missing item that was installed on a new unit. This high-quality component is made of durable materials and is sold individually. Note, it is advised that both rollers should be replaced at the same time. You will need a screwdriver to remove the cover and replace this drum support roller.