
We Sell Only Genuine Whirlpool® Parts.
Whirlpool Misc Appliance Parts & Models
Popular Whirlpool Misc Appliance Parts

This is an original part from Whirlpool for use with stand mixers. The worm bevel gear meshes with the worm gear, causing the rotation of the planetary assembly where the accessories attached. The most common reasons for replacing the worm bevel gear is if the teeth are worn out or damaged, or you hear the motor come on but nothing is moving. This part is sold individually. Here is a list of tools that are needed to replace the bevel gear a flathead screwdriver (large and small), hammer, punch, Phillips screwdriver (large and small), large Phillips driver ratchet, rubber mallet. Optional: towels and a U-shape holder.

This OEM authentic part is to be used in stand mixers made by KitchenAid and Whirlpool. It is an important part of the mechanism that drives the beaters. The gear is made of metal, unfortunately, over time the teeth may wear out. Worn gears may not spin at the proper RPM, if it spins at all, so replacing the gear will help bring the mixer's performance to like-new levels. This part is sold as an individual item. Please refer to the owner's manual and diagrams of your model to ensure the proper installation. Note, when replacing this part, to help reduce friction, planetary grease is required.

This is an authentic KitchenAid replacement part, sold individually.
The Gears, Worm & Pinion Assembly is the main drive gear system for the mixer. They can either wear slowly over time so that metal gears do not wear, or they can completely fail when the mixer is overloaded, as a safety mechanism.
This part is compatible with the mixer models listed below.
A screwdriver is needed for repair.

Genuine KitchenAid replacement part
This brush is sold individually, 2 are needed for the Mixers shown below
It is always best to replace both brushes, even if only one is worn. Worn brushes frequently are the cause behind a motor running poorly. Replacing brushes can fix a motor that’s operating intermittently. These brushes are keyed and will only go in one way to work correctly.
Tools used:
• Flat Head Screw Driver

This is a genuine KitchenAid replacement part, it is sold individually.
The coupling is the part of a blender that transfers power from the blender's motor to the blade assembly.
Over time, the teeth on blender coupling wear down until they no longer engage properly on the blade assembly.
We do have an article and video on

This replacement part is supplied directly from the original equipment manufacturer. It is specially designed for Whirlpool stand mixers. The worm gear is part of the drive system that rotates the attachments for your mixer. It is driven by the gear on the end of the armature. Over time the part may wear out or get damaged eventually requiring a replacement to ensure the unit is functioning properly. Keep in mind this high-quality worm gear is made of durable plastic with metal and is sold individually. Refer to the diagrams of your model for the correct installation of the new part.

This is an original part from Whirlpool for use with stand mixers. The worm bevel gear meshes with the worm gear, causing the rotation of the planetary assembly where the accessories attached. The most common reasons for replacing the worm bevel gear is if the teeth are worn out or damaged, or you hear the motor come on but nothing is moving. This part is sold individually. Here is a list of tools that are needed to replace the bevel gear a flathead screwdriver (large and small), hammer, punch, Phillips screwdriver (large and small), large Phillips driver ratchet, rubber mallet. Optional: towels and a U-shape holder.

This OEM authentic part is to be used in stand mixers made by KitchenAid and Whirlpool. It is an important part of the mechanism that drives the beaters. The gear is made of metal, unfortunately, over time the teeth may wear out. Worn gears may not spin at the proper RPM, if it spins at all, so replacing the gear will help bring the mixer's performance to like-new levels. This part is sold as an individual item. Please refer to the owner's manual and diagrams of your model to ensure the proper installation. Note, when replacing this part, to help reduce friction, planetary grease is required.

This is an authentic KitchenAid replacement part, sold individually.
The Gears, Worm & Pinion Assembly is the main drive gear system for the mixer. They can either wear slowly over time so that metal gears do not wear, or they can completely fail when the mixer is overloaded, as a safety mechanism.
This part is compatible with the mixer models listed below.
A screwdriver is needed for repair.

Genuine KitchenAid replacement part
This brush is sold individually, 2 are needed for the Mixers shown below
It is always best to replace both brushes, even if only one is worn. Worn brushes frequently are the cause behind a motor running poorly. Replacing brushes can fix a motor that’s operating intermittently. These brushes are keyed and will only go in one way to work correctly.
Tools used:
• Flat Head Screw Driver

This is a genuine KitchenAid replacement part, it is sold individually.
The coupling is the part of a blender that transfers power from the blender's motor to the blade assembly.
Over time, the teeth on blender coupling wear down until they no longer engage properly on the blade assembly.
We do have an article and video on

This replacement part is supplied directly from the original equipment manufacturer. It is specially designed for Whirlpool stand mixers. The worm gear is part of the drive system that rotates the attachments for your mixer. It is driven by the gear on the end of the armature. Over time the part may wear out or get damaged eventually requiring a replacement to ensure the unit is functioning properly. Keep in mind this high-quality worm gear is made of durable plastic with metal and is sold individually. Refer to the diagrams of your model for the correct installation of the new part.