
We Sell Only Genuine Black and Decker® Parts.
Black and Decker Miter Saw Parts & Models
Popular Black and Decker Miter Saw Parts

This is a genuine Dewalt replacement part, it is sold individually.
The purpose of this bolt is to secure the blade on the miter saw models shown below.
It has a 1/2 " hex head. It is 1 inch long, with left hand threads.

This Kerf plate is a genuine DeWalt replacement part. It is made of plastic with a slot in the middle for the saw blade to slide through. It has 3 screw holes on each side (6 in total) to firmly secure the kerf plate to your saw.
rnrnKerf plates (also called kerf boards) are used to prevent excessive splintering, resulting in cleaner cuts. Using the wrong kerf plate for your tool can give a rough edge to the material you’re cutting.

This brush and holder assembly is a genuine Dewalt replacement part, not aftermarket or generic. _b_This item is sold individually_/b_. As pictured, this item includes everything you need to replace a brush in your power tool. The brush, holder, terminals, and spring are included and ready for installation.
If you only need the carbon brush and not this entire holder assembly, you can purchase the brush separately (see the 'Related Items' section below).
This brush and holder is compatible with the tools listed below, but it is not guaranteed to fit any other power tools.
It is advised that you replace both brushes only if you think all you need is one.

This clamshell housing set is a genuine Dewalt replacement part, not generic or aftermarket. This handle housing is a common replacement item on popular Dewalt miter saws. Both sides of the housing are included, but mounting/assembly hardware is sold separately. The on/off trigger switch is not included. This handle is a direct replacement for a broken or missing handle on your saw.rn
rnThis clamshell set is compatible with the Dewalt tools listed in the 'Compatibility' section below. It will not fit any other power tools.

This is a genuine Dewalt replacement part, it is sold individually.
The purpose of the Blade Adapter, is to make the bore of a blade that is 1 inch and reduce to a 5/8 inch bore.
Making it possible to use a 1 inch bore blade on a 5/8 inch arbor.

This is a genuine manufacturer-supplied replacement which is specially designed for use with DeWALT and Black and Decker saws. The purpose of a brush is to conduct the current in an electric motor that powers the tool. Unfortunately, the material will wear out and it may cause intermittent performance eventually requiring a replacement. Keep in mind this high-quality brush is sold individually When replacing carbon brushes, be sure to also inspect your armature for burns, cracks, or other damage which indicates a larger motor problem.
Not sure if your carbon brush is causing your motor problems? See our power tool repair article: Whodunnit? The brushes or the switch?
This is a genuine Dewalt replacement part, it is sold individually.
The purpose of this bolt is to secure the blade on the miter saw models shown below.
It has a 1/2 " hex head. It is 1 inch long, with left hand threads.

This Kerf plate is a genuine DeWalt replacement part. It is made of plastic with a slot in the middle for the saw blade to slide through. It has 3 screw holes on each side (6 in total) to firmly secure the kerf plate to your saw.
rnrnKerf plates (also called kerf boards) are used to prevent excessive splintering, resulting in cleaner cuts. Using the wrong kerf plate for your tool can give a rough edge to the material you’re cutting.

This brush and holder assembly is a genuine Dewalt replacement part, not aftermarket or generic. _b_This item is sold individually_/b_. As pictured, this item includes everything you need to replace a brush in your power tool. The brush, holder, terminals, and spring are included and ready for installation.
If you only need the carbon brush and not this entire holder assembly, you can purchase the brush separately (see the 'Related Items' section below).
This brush and holder is compatible with the tools listed below, but it is not guaranteed to fit any other power tools.
It is advised that you replace both brushes only if you think all you need is one.

This clamshell housing set is a genuine Dewalt replacement part, not generic or aftermarket. This handle housing is a common replacement item on popular Dewalt miter saws. Both sides of the housing are included, but mounting/assembly hardware is sold separately. The on/off trigger switch is not included. This handle is a direct replacement for a broken or missing handle on your saw.rn
rnThis clamshell set is compatible with the Dewalt tools listed in the 'Compatibility' section below. It will not fit any other power tools.

This is a genuine Dewalt replacement part, it is sold individually.
The purpose of the Blade Adapter, is to make the bore of a blade that is 1 inch and reduce to a 5/8 inch bore.
Making it possible to use a 1 inch bore blade on a 5/8 inch arbor.

This is a genuine manufacturer-supplied replacement which is specially designed for use with DeWALT and Black and Decker saws. The purpose of a brush is to conduct the current in an electric motor that powers the tool. Unfortunately, the material will wear out and it may cause intermittent performance eventually requiring a replacement. Keep in mind this high-quality brush is sold individually When replacing carbon brushes, be sure to also inspect your armature for burns, cracks, or other damage which indicates a larger motor problem.
Not sure if your carbon brush is causing your motor problems? See our power tool repair article: Whodunnit? The brushes or the switch?