Why Read This Article?
Finish Nailer Repair - Replacing the Driver Guide (Ridgid Part # 79004001022)
Article Breakdown
Finish Nailer Repair - Replacing the Driver Guide (Ridgid Part # 79004001022)
Tools & Materials
The wrench is used to install and remove the flange (lock) nut on your grinder. It is a spanner type wrench with four pins (two on each side) that fit into the locknut's holes. The distance between the pins can vary, so you'll want to make sure you order the correct wrench for your specific grinder.
Let's get started.
USING THE SPANNER WRENCH Your new wrench has two sets of pins: larger pins on one side, and smaller pins on the other side. To use the spanner wrench:
- Determine which side of the wrench is required (the small pins or the large pins) by comparing it to the flange nut on your grinder.
- Engage the spindle-lock on the grinder.
- Align the pins of the wrench with the holes on the flange nut.
- Rotate the wrench to tighten (or loosen) the flange nut.