How to Replace the Sanding Pad on a Porter Cable Sander

The sanding pad both holds the sandpaper and provides a flat surface for sanding. This pad uses adhesive-backed paper and contains holes to facilitate dust collection. Over time, the pad will wear out. It will become nicked around the edge if it is struck against something while sanding. The vinyl surface will eventually rip free from the foam pad.

Let's get started.

REMOVING THE SANDING PAD   1. Remove the sanding pad.

a. Remove the (3) screws securing the sanding pad to the sander.

b. Remove the sanding pad.

c. Remove the screws from the sanding pad.

INSTALLING THE NEW SANDING PAD   2. Install the sanding pad.

a. Install the (3) screws into the new sanding pad.

b. Install the new sanding pad onto the sander and align the screws with the mounting holes on the hub.

c. Secure the sanding pad with the screws.