How to Replace the Adapter on a DeWALT Planer

The adapter attaches to the dust shroud. It allows you to connect either a 2.5-inch or 4-inch dust collection hose to the planer. The adapter can be accidentally damaged it if is hit by something or if the dust collection hose pulls on it.

Let's get started.

REMOVING THE ADAPTER   1. Remove the adapter.

a. Use a small screwdriver to depress the lock pin on the adapter.

b. Rotate the adapter counterclockwise to disengage the internal "twist-lock".

c. Pull the adapter away from the dust shroud.

INSTALLING THE NEW ADAPTER

  2. Install the adapter.

a. Partially install the new adapter onto the dust shroud outlet tube, using the inside edge of the adapter itself to depress the metal lock pin.

b. Align the new adapter with the twist-lock tab (opposite the metal pin) and press the adapter onto the outlet tube.

c. Rotate the adapter (clockwise) to secure it to the dust shroud (the metal lock pin should engage the mounting hole on the adapter).