Why Read This Article?
Finish Nailer Repair - Replacing the Driver Guide (Ridgid Part # 79004001022)
Article Breakdown
Finish Nailer Repair - Replacing the Driver Guide (Ridgid Part # 79004001022)
Tools & Materials
End cap cracked? It's time to face the fix. Whether you are a master carpenter or an occasional drill-seeker, eReplacementParts.com provides the parts, procedures and facts you need to fearlessly fix what fails you.
The end cap provides protection to the back of the motor on your DeWALT hammer drill. It also provides easy access for replacing the motor brushes. It's not uncommon for the end cap to become damaged if the drill is dropped or impacted. Replacing the cap is very easy to do.
This article provides step-by-step instructions for removing and installing the end cap on a DeWALT cordless hammer drill.
Let's get started. REMOVING THE END CAP [top] 1. Remove the battery.
Remove the battery from the drill.
2. Remove the end cap.
Remove the (4) screws from the end cap.
Remove the end cap from the drill.
INSTALLING THE NEW END CAP [top] 3. Install the end cap.
Install the new end cap.
Secure the end cap with the (4) screws.
REASSEMBLING THE UNIT [top] 4. Reinstall the battery.
Install the battery.
As you just learned, fixing things yourself means more drilling with less billing. Hopefully, this article has restored your ability to drill holes without replacing your whole drill. And that's just the tip of the bit. Our online repair guides can help expand your skills far beyond drills; empowering you to face power tool problems whenever they arise; and to fearlessly fix whatever fails you.