eReplacementParts.com
866-322-9842
Toro Parts
Repair Parts Home  Toro Parts  Toro Snowblower Screws

Toro Snowblower Screws

Self Threading Bolt
Part Number: 32144-41
In Stock, 25+ available
This is an authentic OEM self-tapping bolt used on Toro snow throwers/blowers. It is designed to secure the bushing/gear case assembly together. By using a wrench and a self tapping bolt, precisely fitted threads are created in the opening of the case. This allows for the two part to be secured tightly together. Please note this bolt is sold individually.
Screw
Part Number: 136-7182
In Stock, 25+ available
This is a Genuine OEM replacement Paddle Bolt used on Toro Snowthrowers. It is made out of Metal and it is Sold Individually. It helps to secure the Paddle to the Rotor using a Lock Nut. Requires a Torx Screwdriver.
Handle Screw
Part Number: 92-2260
In Stock, 25+ available
Genuine OEM sourced part used on variety of Toro Lawn and Garden Equipment. This part is sold individually and the Nut is not included. The square area under the head is designed to fit into a square hole in the workpiece. It is this square hole that restrains the bolt and keeps it from turning when the nut is tightened.
Screw
Part Number: 321-10
In Stock, 25+ available
This is a genuine OEM sourced replacement part designed for use with snow blowers and throwers. Shear bolts are installed in order to protect your snowblower. If the auger gets jammed or clogged, the shear bolt is designed to snap at a certain point of pressure, so it will not damage any other part of the unit. This item is made out of metal and it is sold individually. In order to install or remove this bolt you will need a wrench.
Screw-Hh
Part Number: 323-9
In Stock, 25+ available
It is made of metal and is sold individually. The screw connects to the idler pulley. A socket set might be needed during the installation process. Over time this part may become stripped and will need to be replaced. This part is an OEM from Toro and Lawn Boy for use in snowthrowers, tillers, blower-vacuums, and lawn tractors.
Screw-Hwhtf
Part Number: 32144-34
In Stock, 25+ available
This screw is an authentic OEM sourced hardware, it is not an aftermarket imitation. It is commonly utilized on Toro snowthrowers. this is a standard hardware which has multiple uses depending on your unit. Please make sure to check appropriate diagrams for correct location and use of this screw. Please note, one metal screw is included per order. You will need a wrench or a flat-head screwdriver to install or remove this screw.
Screw
Part Number: 136-7183
In Stock, 25+ available
It is a high quality hardware that is sourced from original equipment manufacturer for use with Toro snowblowers. This is one of the screws that is used to secure the rotor blade. Please note one durable metal screw is included per order, you will need a torx screwdriver to secure or remove it.
Screw-Plastite
Part Number: 46-8091
In Stock, 25+ available
This screw is an OEM part sourced directly from the manufacturer and is used in Toro snowthrowers. It requires a wrench and connects the ring-chute to the chute-discharge. The screw is made of metal and is sold as an individual part. Screws will need to be replaced when they become stripped.
Screw-Carr
Part Number: 3229-11
In Stock, 25+ available
This carriage screw is a genuine manufacturer sourced replacement part. It is specially designed for use with Toro snowblowers. This screw is generally used to secure the scraper blade. The square area under the head is designed to fit into a square hole in the workpiece. It is this square hole that restrains the screw and keeps it from turning when the nut is tightened. Please note, this screw is made out of metal and it is sold individually.
Screw-Hhf
Part Number: 321-44
In Stock, 25+ available
This is a genuine Toro replacement part that has been sourced from the original manufacturer to be used with snowthrowers. The metal hex head screw is used to secure the impeller assembly. This item is available as an individual replacement part.
Screw-Hh
Part Number: 321-4
In Stock, 22 available
This is a genuine OEM approved replacement part designed for use with Toro snow blowers/throwers. It is used to secure the half-rotor and the blade. This part is made out of metal and it is sold individually. Requires a wrench to tighten/loosen this screw.
Screw-Taptite
Part Number: 32144-1
In Stock, 25+ available
This authentic manufacturer-sourced screw-taptite is made for use with Toro and Lawn-Boy lawn and garden equipment. It is an identical replacement for a missing or a damaged hardware that was installed on a new unit. Refer to the appropriate diagrams for your model to ensure the exact location and the correct application of this screw. It is made of durable metal and is sold as an individual item. A wrench will be needed to secure or remove it.
Screw-Hh
Part Number: 322-11
In Stock, 25+ available
This item has been sourced from the original manufacturer to be used with snowthrowers, lawnmowers, and tillers from Toro. The hex head screw is used with several different types of equipment and the application of the screw can vary based on the model of the machine. It is recommended to review your model's illustrated part diagram to verify the screw's compatibility. This item is sold individually.
Screw-Hwhtf
Part Number: 49-2040
In Stock, 25+ available
This is a genuine replacement part manufactured for use with outdoor power equipment. This flanged hex head screw has several applications, please see model diagram for part use and location. This screw is available as an individual replacement part.
Screw-Hwh
Part Number: 32144-112
In Stock, 10 available
This replacement screw is a high quality item commonly utilized on Toro snowthrowers. It is a genuine OEM supplied hardware which has multiple uses depending on the equipment. Please make sure to check appropriate diagrams for correct location and application of this screw. This hex washer head screw is sold individually and it will require a wrench to secure of remove it.
Bolt 1/4-20
Part Number: 32144-4
In Stock, 19 available
This screw is an authentic OEM sourced hardware, it is not an aftermarket imitation. It is commonly utilized on Toro snow throwers. It is a standard hardware which has multiple uses depending on your unit, please make sure to check appropriate diagrams for correct location and use of this hardware. One hex head screw is included per order.
Screw-Pph, Sems
Part Number: 137-3013
In Stock, 19 available
This is an authentic replacement part manufactured for use with snowthrowers. The screw is used to secure the shroud assembly to the body of the snowthrower. This screw is available as an individual replacement part, please see model diagram for associative parts.
Screw-Hh
Part Number: 322-7
In Stock, 25+ available
This is an authentic Toro replacement part, sourced from the original manufacturer for use with snowthrowers. The metal hex head screw is used with a variety of different models of snowthrowers. This screw can have different applications depending on the model of snowthrower. The screw is sold as an individual replacement part, please see model diagram for part location and usage.
Shoulder Screw
Part Number: 120-7950
In Stock, 25+ available
This is an authentic replacement part that has been sourced from the original manufacturer to be used with riding lawnmowers from Toro and Lawn Boy. The shoulder screw is commonly used to secure the side fenders to the mower's frame assembly. This bolt is sold as an individual replacement part.
Screw-Carr
Part Number: 3230-23
In Stock, 11 available
It is a genuine replacement part that is supplied by the original manufacturer for use with Toro snowthrowers. This is a special hardware which helps to secure the scraper blade assembly, please make sure to check appropriate diagrams of your model for the correct application of this screw. It is a high-quality component which is made of durable metal and is sold individually.
eReplacementParts.com
7036 South High Tech Dr.
Midvale, UT 84047
visa mastercard discover american express PayPal

fancyboxy