Handle Screw 92-2260

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Knob and screw were missing

Put the screw through and tightened it with the knob. Considering we were taping it for more than a month, this was easy, reasonable and perfect!

Did you find this story helpful?

Thanks for voting and helping fellow customers!

1 of 1 people found this instruction helpful

Tool Type:

Lawn Mower

Parts Used:

Plug-discharge, Rear - 105-1842

Mulching Blade (22-inch) - 131-4547-03

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Socket set

Needed to replace the blade, lost the handle screw, knob and plug discharge

Followed the instructions on the manual for replacing the blade, took off the rope I was using for the knob handle and screw, put the plug discharge in the rear so I did not have to bag every time I mowed.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

1 of 1 people found this instruction helpful

Tool Type:

Lawn Mower

Parts Used:

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver

Missing parts.

Replaced the missing screw and the knob on the handle assembly.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Snowblower

Parts Used:

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Missing parts

Reassemble push handle. Replaced missing pieces. Done.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Snowblower

Parts Used:

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

, None

Handle screw was bent. Just replaaced it. Other parts ordered as spares.

Simple. Remove old screws and insert new one.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Lawn Mower

Parts Used:

Retainer-push On - 3290-320

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

, Hammer

Handle bolts needed replacement

No tools needed for handle bolts since it is design for hand only removal.

Tire retaining push on required an hammer to hammer in the the part.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Snowblower

Parts Used:

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

, none

the original parts vibrated off

I put the bolt through the handle, put the washer on, and tightened the screw as tight as I manually could. They did not loosen on next use. So I call this repair a success

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Snowblower

Parts Used:

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

, hand

knob vibrated loose and disappeared

bolt in hole knob on other end

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Snowblower

Parts Used:

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

, hands

handle screw broke

Replaced screw and tightened with wing nut

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Lawn Mower

Parts Used: