eReplacementParts.com
877-346-4814
Briggs and Stratton Parts

Screw 691061

OEM part for: Briggs and Stratton

Part Number: 691061


Install
Videos!
Screw - 691061:Briggs and Stratton 360 View
Screw - 691061:Briggs and StrattonScrew - 691061:Briggs and StrattonScrew - 691061:Briggs and StrattonScrew - 691061:Briggs and Stratton 360 View
In Stock
Order within the next 5 hours and your part ships today!
Medium 30-60 minutes (2 rated repairs)?
OEM: Original Equipment Manufacturer ?
Briggs and Stratton
Does this fit my product?

Product Description ?

This is an authentic OEM component from Briggs & Stratton. The magneto armature screw is compatible with many lawn and garden engines. The hardened metal screw helps to mount the magneto armature. A wrench is required for the removal and installation. The magneto armature screw is sold individually. It is recommended to refer to engine manual and diagrams for further instruction.

  • Classification: Part
  • Weight: 0.10 lbs.
  • Shipping: Ships Worldwide

Frequently Purchased Together ?

Compatibility

This Screw will fit the following 81880 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.

Don't see yours? Try searching our site for :

This item works with the following types of products:

  • Engine Parts

This part replaces obsolete part #: 555539, 94731, 93381

Customer Part Reviews ?

5
Average Rating (out of 5):
2 Reviews
Click to filter by ratings:
5 stars
2
4 stars
0
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • correct parts fit like original
    the mice are gone and the mower is on the job again
    Guest - July 26, 2023 Verified Purchase
    Perfect fit
    Magneto screws were perfect got my mower up and running
    Guest - May 6, 2022 Verified Purchase

    Questions & Answers ?

    Our customer Service team is at the ready daily to answer your part and product questions.

    photo of team member
    Ask our Team

    We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    Does this fit my product?

    Questions & Answers for Screw


    691061what is the thread pitch on this screw? I need to re-tap a hole.
    DAVID for model number 691061 asked on 2023-05-08
    Hello David, thank you for asking. This is a size between SAE 8-32 and 10-32. 0.80 metric thread pitch is the same as 32 tpi. We hope this helps.
    eReplacementParts Team May 08, 2023
    What is the head size of this screw? 6mm?
    John asked on 2022-08-14
    Hello John, Thank you for your inquiry. We show that the head of this screw is 5/16 of an inch or approximately 8 mm. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
    eReplacementParts Team August 14, 2022

    Customer Repair Instructions ?

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

    Medium 30-60 minutes (2 rated repairs)?

    Severe mouse nest infestation, corrosion, and dislodged valve seat

    C - November 5, 2021
    Tool Type

    Lawn Mower

    Difficulty

    Hard

    Time

    More than 2 hours

    Tools Used

    Screwdriver, Pliers, Socket set, Wrench Set, Nutdriver, Rotating wire brush

    Parts Used
    1. Disassemble engine covers, muffler, carb, flywheel, head
    2. Clean and remove as much corrosion and mouse nest as possible
    3. Remove two broken head bolts that were corroded into cylinder
    4. Reseat valve seat and lap valves.
    5. Replace magneto, head gasket, head, two bolts, spark plug, some cylinder baffles.
    6. Repaint, reassemble. Starts and works fine!
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Old John Deere mower stopped working

    Joel - May 16, 2019
    Tool Type

    Lawn Mower

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Socket set, Nutdriver

    1. Tested for presence of spark-none found
    2. Searched for model number on front of mower
    3. Ereplacements had correct replacement magneeto for my model number (local repair shops did not have the part)
    4. Removed fuel tank and top cover, removed old magneeto
    5. Installed new magneeto and set proper gap between magneeto and flywheel using a business card.
    6. Replaced cover and fuel tank, sprayed a little starter fluid and off she ran!
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.

    Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.

    Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.

    All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.

    This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.

    eReplacementParts.com
    7174 South 400 West
    Suite 5
    Midvale, UT 84047
    visa mastercard discover american express PayPal