GE Washer Replacement Parts For Model VVXR1040T2AB
Find GE VVXR1040T2AB Parts By Symptom
Choose a symptom to view parts that fix it.
Leaks water |
Bad vibration |
Doesn't agitate |
Doesn't drain |
Controls / buttons don't work right |
Doesn't spin |
Grinding or squealing sound |
Doesn't fill |
Show All Symptoms |
Popular Parts for GE VVXR1040T2AB
Part Number:WB1X5716
Usually ships in 7 - 12 business days
Part Number:WH1X2722
Usually ships in 7 - 12 business days
Note: This bumper is sold individually. The bumper is located under the washer lid.
Part Number:WH1X2740
In Stock
Note: When the lid is being closed, the angle of this hinge applies pressure to the lid lever.
Part Number:WH1X2764
Usually ships in 7 - 12 business days
Part Number:WH1X2763
Usually ships in 7 - 12 business days
Part Number:WH1X2748
Discontinued
Part Number:WH1X2089
Discontinued
Part Number:WH1X2749
Usually ships in 7 - 12 business days
Part Number:WH2X1217
Usually ships in 7 - 12 business days
Part Number:WH1X2727
In Stock
Note: Appliance would take 4 straps. It is recommended to replace all 4 at the same time. They keep the tub in the center of the cabinet. Sold individually.
Part Number:WH1X2726
Usually ships in 7 - 12 business days
Part Number:WH49X10021
Usually ships in 7 - 12 business days
Part Number:WH46X344
Discontinued
Part Number:WH1X2745
Usually ships in 7 - 12 business days
Part Number:WH16X514
Usually ships in 7 - 12 business days
Part Number:WH2X1207
Discontinued
Part Number:WH2X1190
Usually ships in 7 - 12 business days
Part Number:WH46X342
Usually ships in 7 - 12 business days
Part Number:WH41X10036
Usually ships in 7 - 12 business days
Part Number:WH1X2724
Usually ships in 7 - 12 business days
Part Number:WH44X1188
Discontinued
Part Number:WH1X2734
Discontinued
Note: This is part of the lid switch actuator mechanism and activates the lid switch, when the lid is closed, to start the wash cycle and when the lid is open, it stops the cycle.
Part Number:WH44X1206
Usually ships in 7 - 12 business days
Part Number:WH46X10079
Discontinued
Part Number:WH2X1188
Usually ships in 7 - 12 business days
Part Number:WH2X1216
Usually ships in 7 - 12 business days
Part Number:WE2X281D
Usually ships in 7 - 12 business days
Part Number:WH12X538
Usually ships in 7 - 12 business days
Part Number:WH49X10017
Usually ships in 7 - 12 business days
Part Number:WB17X5060
Usually ships in 7 - 12 business days
Part Number:WH16X513
In Stock
Note: This clip holds the drain hose to the back of the washer.
Part Number:WH1X2594
Usually ships in 7 - 12 business days
Part Number:WH2X1186
In Stock
Note: 8 - 18 ab ihw 5/8 s - sold individually.
Part Number:31-1737
Usually ships in 7 - 12 business days
Part Number:39-9343
Discontinued
Part Number:31-2756-2
Discontinued
Part Number:WH46X350
Usually ships in 7 - 12 business days
Part Number:WH42X10735
Usually ships in 7 - 12 business days
Part Number:WH42X10734
Usually ships in 7 - 12 business days
Part Number:WH2X650
Discontinued
Note: This compression ring works in conjunction with the timer dial.
Part Number:WH11X10014
Usually ships in 7 - 12 business days
Part Number:WH1X2757
Discontinued
Note: Please be advised this part is redesigned and is now different from the original.
Part Number:WH12X10067
Usually ships in 7 - 12 business days
Part Number:WH2X1219
Usually ships in 7 - 12 business days
Part Number:WH42X2404
Usually ships in 7 - 12 business days
Part Number:WE1X1269
Discontinued
Note: This knob will accept a D-shaped shaft.
Part Number:WH42X2402
Usually ships in 7 - 12 business days
Part Number:WH02X10090
Usually ships in 7 - 12 business days
Part Number:WH42X2401
Usually ships in 7 - 12 business days
Part Number:WH02X10090
Usually ships in 7 - 12 business days
Part Number:WH01X10106
Discontinued
Note: Sold individually.
Part Number:WH46X337
Discontinued
Part Number:WH46X10047
Discontinued
Part Number:WH8X379
Usually ships in 7 - 12 business days
Part Number:WH12X1017
Discontinued
Note: The timer controls most of the operations of the washer: water level, tub filling and emptying, length of cycles, and cycle setting sequences.
Part Number:WH2X1210
Usually ships in 7 - 12 business days
Part Number:WH43X10033
Discontinued
Note: This part does not include the agitator cap. Must order separately.
Part Number:WH12X1043
Discontinued
Note: The pin on the lid pushes on the lever of the lid switch to tell the machine that the lid is closed.
Part Number:WH45X10046
Usually ships in 7 - 12 business days
Part Number:WH12X870
Usually ships in 7 - 12 business days
Part Number:WB17X5053
Usually ships in 7 - 12 business days
Part Number:WH12X497
Discontinued
Part Number:WH19X225
Usually ships in 7 - 12 business days
Part Number:WB17X5054
Usually ships in 7 - 12 business days
Part Number:WH49X10029
Discontinued
Part Number:WH1X2036
In Stock
Note: This hose clamp kit contains two clamps. The smaller of the two is an inch in diameter while the larger of the two is two inches in diameter.
Part Number:WH13X10024
In Stock
Note: This water inlet valve attaches the water lines to the back of your appliance. The attaching solenoids on the valve open and close according to the desired temperature, or amount of water needed.
Part Number:WH13X10024
In Stock
Note: This water inlet valve attaches the water lines to the back of your appliance. The attaching solenoids on the valve open and close according to the desired temperature, or amount of water needed.
Part Number:WH2X42D
Usually ships in 7 - 12 business days
Part Number:WD1X1434D
Discontinued
Part Number:WH38X10002
Discontinued
Note: This transmission and brake assembly comes with a new tub seal. This kit aids in the spinning or agitating cycles.
Part Number:WH17X101
Discontinued
Part Number:WH2X1201
Usually ships in 7 - 12 business days
Part Number:WH2X1202
Usually ships in 7 - 12 business days
Part Number:WH16X516
Not Available for Retail Sale
Part Number:WH2X1203
Usually ships in 7 - 12 business days
Part Number:WH1X2733
In Stock
Note: This retaining clip is a spring clip that should be replaced each time it is removed from the clutch assembly.
Part Number:WH2X1204
Discontinued
Part Number:WH16X517
Discontinued
Part Number:WH16X518
Discontinued
Part Number:WH5X256
Discontinued
Note: This part is used with units that have a removable front panel.
Part Number:WH49X10029
Discontinued
Part Number:WH7X126
Discontinued
Part Number:WH1X2750
Usually ships in 7 - 12 business days
Part Number:WH1X2753
Discontinued
Part Number:WH41X22935
In Stock
Note: Washing machine agitator drive bell with bolt. It connects the transmission drive shaft to the agitator base. *NOTE: Hold down bolt not sold separately.
Part Number:WH41X374
Discontinued
Part Number:WH1X2730
Usually ships in 7 - 12 business days
Part Number:WH02X10267
Usually ships in 7 - 12 business days
Part Number:WH41X22935
In Stock
Note: Washing machine agitator drive bell with bolt. It connects the transmission drive shaft to the agitator base. *NOTE: Hold down bolt not sold separately.
Part Number:WH02X10383
In Stock
Note: This black new style tub seal is two and a half inches in diameter.
Part Number:WH2X1208
Discontinued
Part Number:WH45X171
Usually ships in 7 - 12 business days
Part Number:WH45X10029
Discontinued
Part Number:WH1X2728
Usually ships in 7 - 12 business days
Note: Used in Washers.
Part Number:WH2X1194
Usually ships in 7 - 12 business days
Note: Sold individually.
Part Number:WH45X154
Not Available for Retail Sale
Part Number:WH45X152
Discontinued
Part Number:WH49X10010
Usually ships in 7 - 12 business days
Part Number:WH2X1221
Usually ships in 7 - 12 business days
Part Number:WH1X2036
In Stock
Note: This hose clamp kit contains two clamps. The smaller of the two is an inch in diameter while the larger of the two is two inches in diameter.
Part Number:WH1X2729
In Stock
Note: This part is for the hose to outer tub.
Part Number:WH41X369
Discontinued