Power Cord

This cord is a genuine OEM replacement part and is sold individually. Power Cord Specifications: 2 Wires. 18 Gauge. 2 Prongs. 6-1/2 Feet Long. It is constructed with thick insulation for long service life and a strong two-prong plug. This cord is compatible with the tools listed below. It can work for other applications and for other tools as well, but compatibility is not guaranteed. Installation of this part requires the new cord wires be stripped and to fit correctly into the wire terminals.

Deep-Groove Ball Bearing

This steel bearing is a genuine replacement part. This item is used in a variety of Bosch power tools. Ball bearings allow for reduced friction and therefore smooth rotation. Due to metal fatigue, ball bearings are to be replaced regularly. This part is sold individually.

Carbon Brush Set

Genuine Bosch replacement part
Set of 2 Carbon Brushes with wire lead attached.

• Worn brushes are frequently the cause of a poorly running motor.
• Replacing brushes can fix an intermittently operating motor.
• New brushes can restore a motor’s electric braking.

Carbon motor brushes are one of the most commonly replaced power tool parts. The reason is that carbon brushes are wear items, meaning that through friction and use they will gradually wear away and eventually will need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, also check your armature for burns, cracks, or other damage which are indications of a larger motor problem needing attention.

Carbon Brush Set

Genuine Bosch replacement part
rnSet of 2 Carbon Brushes with wire lead attached. rnrnrn

• Worn brushes are often the cause of a poorly running motor
• Replacing brushes can fix an intermittent motor
• New brushes can restore a motor’s electric braking

Carbon motor brushes are one of the most commonly replaced power tool components.  Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement.  Worn brushes are common causes of intermittent motor function, reduced electric braking, and reduced motor power.  A worn out brush will often be worn down near the wire lead and may be cracked, pitted, or burned.  When replacing carbon brushes, be sure to also inspect your armature for burns, cracks, or other damage which indicates a larger motor problem.

Grommet

This Grommet (Cord Guard) is a Bosch/Skil genuine replacement part, this item is sold individually.
It is a direct replacement for a damaged or missing cord guard.
Power tool cords undergo a lot of stress, and these cord guards help to alleviate some of that stress at the weakest point--right where the cord enters the tool.
Over time cord guards will deteriorate and eventually require replacement.
Keeping a strong cord guard on your tool will help will cord life.
This cord guard is compatible with the tools listed below .

Brush Spring

This coil type brush spring is a genuine Bosch replacement part. It is sold individually.

As the carbon brush gradually wears away, the brush spring decompresses to keep the brush pressed against the armature in spite of the continual erosion of the brush. This ensures lasting tool performance, helping to prevent low motor power, reduced electric braking, and intermittent motor function.

While brush springs aren't prone to failure, their small size makes them easy to lose while doing motor maintenance.