866-322-9842
Mon-Fri 7am-1am EST
Sat-Sun 7am-11pm EST
Repair Parts Home  Power Tool Parts  Poulan Parts  530023877 Fuel Line Fitting

Fuel Line Fitting

Part Number: 530023877
PoulanWeed EaterHusqvarna
Availability: 25+ in stock
Price: $3.99
Quantity:
Order within the next 7 hours
and your part ships today!
Description:
This genuine OEM replacement part is sold individually and is made out of plastic. The purpose of the 530023877 Fuel line Fitting is to connect two pieces of fuel line together. It is important to replace in case of damage to avoid leakage and possible hazard. Make sure to disconnect the spark plug wire before starting a repair.
Product Information
Manufacturer: Poulan, Weed Eater, Husqvarna
Product Number: 530023877
Classification: Part
Weight: 0.01 lbs.
Shipping: Ships Worldwide
Related Products
Compatibility

This part is compatible with the following machines:

Poulan
1800 Gas Chain Saw
1800 Gas Chain Saw
1900 Gas Chain Saw
1900 Gas Chain Saw
1950 Type 1 Gas Chain Saw
1950 Type 1 Gas Chain Saw
1950 Type 2 Gas Chain Saw
1950 Type 2 Gas Chain Saw
1950 Type 3 Gas Chain Saw
1950 Type 3 Gas Chain Saw
1950 Type 4 Gas Chain Saw
1950 Type 4 Gas Chain Saw
1950 Type 5 Gas Chain Saw
1950 Type 5 Gas Chain Saw
1950 Type 6 Gas Chain Saw
1950 Type 6 Gas Chain Saw
1950 Type 7 Gas Chain Saw
1950 Type 7 Gas Chain Saw
1950LE Type 1 Gas Chain Saw
1950LE Type 1 Gas Chain Saw
1950LE Type 2 Gas Chain Saw
1950LE Type 2 Gas Chain Saw
1975 Type 1 Gas Chain Saw
1975 Type 1 Gas Chain Saw
1975 Type 2 Gas Chain Saw
1975 Type 2 Gas Chain Saw
1975 Type 3 Gas Chain Saw
1975 Type 3 Gas Chain Saw
1975 Type 4 Gas Chain Saw
1975 Type 4 Gas Chain Saw
1975 Type 5 Gas Chain Saw
1975 Type 5 Gas Chain Saw
1975 Type 6 Gas Chain Saw
1975 Type 6 Gas Chain Saw
1975 Type 7 Gas Chain Saw
1975 Type 7 Gas Chain Saw
1975LE Type 1 Gas Chain Saw
1975LE Type 1 Gas Chain Saw
1975LE Type 2 Gas Chain Saw
1975LE Type 2 Gas Chain Saw
2000 Gas Chain Saw
2000 Gas Chain Saw
2050 Type 1 Gas Chain Saw
2050 Type 1 Gas Chain Saw
2050 Type 2 Gas Chain Saw
2050 Type 2 Gas Chain Saw
2050 Type 3 Gas Chain Saw
2050 Type 3 Gas Chain Saw
2050 Type 4 Gas Chain Saw
2050 Type 4 Gas Chain Saw
2050 Type 5 Gas Chain Saw
2050 Type 5 Gas Chain Saw
2050 Type 6 Gas Chain Saw
2050 Type 6 Gas Chain Saw
2050 Type 7 Gas Chain Saw
2050 Type 7 Gas Chain Saw
2055 Type 1 Gas Chain Saw
2055 Type 1 Gas Chain Saw
2055 Type 2 Gas Chain Saw
2055 Type 2 Gas Chain Saw
2055 Type 3 Gas Chain Saw
2055 Type 3 Gas Chain Saw
2055 Type 4 Gas Chain Saw
2055 Type 4 Gas Chain Saw
2055 Type 5 Gas Chain Saw
2055 Type 5 Gas Chain Saw
2055 Type 6 Gas Chain Saw
2055 Type 6 Gas Chain Saw
2055 Type 7 Gas Chain Saw
2055 Type 7 Gas Chain Saw
2050LE Type 1 Gas Chain Saw
2050LE Type 1 Gas Chain Saw
2050LE Type 2 Gas Chain Saw
2050LE Type 2 Gas Chain Saw
2050WT Type 1 Gas Chain Saw
2050WT Type 1 Gas Chain Saw
2050WT Type 2 Gas Chain Saw
2050WT Type 2 Gas Chain Saw
2050WT Type 3 Gas Chain Saw
2050WT Type 3 Gas Chain Saw
2050WT Type 4 Gas Chain Saw
2050WT Type 4 Gas Chain Saw
2050WT Type 5 Gas Chain Saw
2050WT Type 5 Gas Chain Saw
2050WT Type 6 Gas Chain Saw
2050WT Type 6 Gas Chain Saw
2050WT Type 7 Gas Chain Saw
2050WT Type 7 Gas Chain Saw
2055LE Type 1 Gas Chain Saw
2055LE Type 1 Gas Chain Saw
2055LE Type 2 Gas Chain Saw
2055LE Type 2 Gas Chain Saw
2075 Type 1 Gas Chain Saw
2075 Type 1 Gas Chain Saw
2075 Type 2 Gas Chain Saw
2075 Type 2 Gas Chain Saw
2075 Type 3 Gas Chain Saw
2075 Type 3 Gas Chain Saw
2075 Type 4 Gas Chain Saw
2075 Type 4 Gas Chain Saw
2075 Type 5 Gas Chain Saw
2075 Type 5 Gas Chain Saw
2075 LE Gas Chain Saw
2075 LE Gas Chain Saw
2075C Type 1 Gas Chain Saw
2075C Type 1 Gas Chain Saw
2075C Type 2 Gas Chain Saw
2075C Type 2 Gas Chain Saw
2075C Type 3 Gas Chain Saw
2075C Type 3 Gas Chain Saw
2075C Type 4 Gas Chain Saw
2075C Type 4 Gas Chain Saw
2075C Type 5 Gas Chain Saw
2075C Type 5 Gas Chain Saw
2075OC Type 1 Gas Chain Saw
2075OC Type 1 Gas Chain Saw
2075OC Type 2 Gas Chain Saw
2075OC Type 2 Gas Chain Saw
2075OC Type 3 Gas Chain Saw
2075OC Type 3 Gas Chain Saw
2075OC Type 4 Gas Chain Saw
2075OC Type 4 Gas Chain Saw
2075OC Type 5 Gas Chain Saw
2075OC Type 5 Gas Chain Saw
2150 Type 1 Gas Chain Saw
2150 Type 1 Gas Chain Saw
2150 Type 2 Gas Chain Saw
2150 Type 2 Gas Chain Saw
2150 Type 3 Gas Chain Saw
2150 Type 3 Gas Chain Saw
2150 Type 4 Gas Chain Saw
2150 Type 4 Gas Chain Saw
2150 Type 5 Gas Chain Saw
2150 Type 5 Gas Chain Saw
2150 Type 6 Gas Chain Saw
2150 Type 6 Gas Chain Saw
2150 Type 7 Gas Chain Saw
2150 Type 7 Gas Chain Saw
2150 Predator Type 1 Gas Chain Saw
2150 Predator Type 1 Gas Chain Saw
2150 Predator Type 2 Gas Chain Saw
2150 Predator Type 2 Gas Chain Saw
2150 Predator Type 3 Gas Chain Saw
2150 Predator Type 3 Gas Chain Saw
2150 Predator Type 4 Gas Chain Saw
2150 Predator Type 4 Gas Chain Saw
2150 Predator Type 5 Gas Chain Saw
2150 Predator Type 5 Gas Chain Saw
2150 Predator Type 6 Gas Chain Saw
2150 Predator Type 6 Gas Chain Saw

Products Compatibility

This item works with the following types of products:

  • • Chain Saw
  • • Saw
Questions & Answers

Where does the fuel line fitting 530023877 connect found it in bottom of tank also what is its purpose Thank you Jerry
Jerry for model number PP338PT
Hello Jerry, thank you for your inquiry! The fuel line fitting goes in the fuel line that is attached to the fuel filter. I hope this information helps!
Repair Instructions: Submitted by Customers Like You
32 of 32 people found this instruction helpful
Tool Type:
Chain Saw
Parts Used:
Fuel Line - 530069247
Purge Line - 530069216
Fuel Line Fitting - 530023877
Purge Bulb - 530047721
Cylinder Gasket Kit - 530071894
Repair Difficulty:
Easy
Time Spent Repairing:
More than 2 hours
Tools Used:
Screwdriver, Pliers, Socket set, Hemostat for main gas line
Wouldn't keep a prime, bad purge bulb old broken gas lines.
Removed shroud over carb. Removed pull starter shroud. Removed throttle linkage from carb and from saws handle that way you can take the air filter housiing off and get it out of the way, simple to put back together. Removed the choke and kill switch then removed the carb and the carb manifold in order to replace the main gas line to the tank. This makes things alot easier when replacing the main gas line. Installing the main line was the hardest because the line fits extemely tight into the gas tank. I cut the end of the gas line at an angle in order to get it started in to the tank. The gas line I bought comes with instructions to help you do it right. Once I got it started into the tank I used a surgical Hemostat to reach in the tank and pull the hose into the tank to where I could cut the end square and put a new coupler on it and then attach the fuel filter. Long nose needle nose pliers would work but I didn't have a pair. Pulling the hose into the tank was the hardest part because the gas line fits really tight. I put a little WD40 on the line to help lubricate it so it would pull thru easier. Then I replaced all the other gas lines, installed a new Purge Bulb, put new gaskets on the manifold (I didn't replace any internal carb gaskets) I put everything back together, put gas in the tank, primed the Purge Bulb and after two pulls it fired right up and runs good.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
15 of 16 people found this instruction helpful
Tool Type:
Chain Saw
Parts Used:
Fuel Line - 530069247
Purge Line - 530069216
Gasket and Diaphragm Kit - 530069844
Fuel Line Fitting - 530023877
Purge Bulb Kit - 530071835
Fuel Filter - 530095646
Repair Difficulty:
Hard
Time Spent Repairing:
More than 2 hours
Tools Used:
Screwdriver, Pliers, Socket set, Wrench Set, Needed extended needle nose and curved needle nose
Fuel lines completely rotten and broken
Remove and replace fuel lines. Clean carburetor.

The hardest part was routing the fuel lines through the tank. The lines are larger than the hole, thus creating the seal when installed.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
4 of 4 people found this instruction helpful
Tool Type:
Chain Saw
Parts Used:
Fuel Line Fitting - 530023877
Foam Air Filter - 530037793
Purge Bulb Kit - 530071835
Fuel Cap Assembly - 580940901
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers
Replaced Fuel lines
Replaced fuel line and other items on chain saws and the parts cost less from here then buying then local. Also looked at youtube. But I will get all my parts from this web site because I like their prices and delivery time.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Trimmer
Parts Used:
Fuel Line Fitting - 530023877
Spark Plug - 952030249
Purge Bulb - 530047721
Fuel Line - 530069599
Fuel Filter - 530095646
Carburetor Boot Adapter - 545190501
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Pliers, Nutdriver
Fuel lines rotted and broke
Pulled off air cleaner assembly and carburetor
Pulled new lines into fuel tank with pliers
Routed lines in the cowling around carb
Cut to length attached filter to fuel line in tank
Attached to lines to carb and primer bulb
Reassembled carb and air cleaner to engine cylinder
Filled with fuel primed and started
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Edger
Parts Used:
Fuel Line Fitting - 530023877
Fuel Line - 530069599
Fuel Filter - 530095646
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Pliers, Socket set
Clogged fuel line
Replaced fuel lines and fuel filter. Also discovered a clog in the primer bulb plate, used carburetor cleaner and air to clear that. Runs great now.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Trimmer
Parts Used:
Fuel Line Fitting - 530023877
Fuel Line - 530069599
Fuel Filter - 530095646
Filter - 530150253
Starter Assembly - 579063101
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Pliers, Socket set, Nutdriver, Torx bit (starter assembly); razor blade cutter (fuel line)
Fuel line broke, and starter rope frayed
1. Emptied gas tank.
2. Removed air filter cover and air filter.
3. Cut and removed old fuel line and assembly pick up.
4. Fed new fuel line into gas tank and attached assembly pick up. Fed new fuel return line.
5. Cut and attach ends of fuel lines to carburetor.
6. Replace air filter/cover.
7. Removed starter assembly (torx bit).
8. Install new starter assembly.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Trimmer
Parts Used:
Fuel Line Fitting - 530023877
Fuel Line - 530069599
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Socket set
Fuel line disconnected
Removed all of the casing to get to the fuel tank, then threaded in the new line. Done!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Hedge Trimmer
Parts Used:
Fuel Line - 530069247
Purge Line - 530069216
Fuel Line Fitting - 530023877
Spark Plug - 952030249
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Power Drill, Socket set, Wrench Set, Needle nose pliers
The gas lines had rotted.
Removed cover on the handle , which had 4 screws.
Removed purge & gas lines and fuel filter.
Measured for new lines, cut them, used needle nose pliars to reconnect the lines.
Used needle nose pliars to pull lines into fuel tank, and reconnect fuel filter.
Reattached cover w the screws.
Used a socket to remove old spark plug, replaced w new one.
Added fuel, primed it, pulled rope started right up.
Very easy, very fast.
My parts where all delivered same time and was the correct ones. I have had no problems w this company.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Chain Saw
Parts Used:
Fuel Line - 530069247
Purge Line - 530069216
Fuel Line Fitting - 530023877
Purge Bulb Kit - 530071835
Fuel Filter - 530095646
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Pliers, Nutdriver
Loss of power and leaking fuel.
Old saw, used off and on for 15 yrs.
Minimal previous problems.

Be careful removing case in sections.
Layout screws with sections.
Disassembled case.
Cleaning debris as you go.
Removed and replaced the parts I ordered.
Reassembled the case.

Fueled, lubed, 8 pulls it started right up.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Chain Saw
Parts Used:
Fuel Line - 530069247
Purge Line - 530069216
Fuel Line Fitting - 530023877
Foam Air Filter - 530037793
Carburetor Repair Kit Walbro (WT324) - 530069826
Fuel Filter - 530095646
Repair Difficulty:
Medium
Time Spent Repairing:
1-2 hours
Tools Used:
Screwdriver, Pliers, Socket set, Nutdriver, Forceps, scissors
Fuel lines deteriorated, carburetor dirty, filter dirty, chain worn out
1. Removed, cleaned and rebuilt carburetor.
2. Replaced fuel, purge lines and fuel filter.
3. Oiled and replaced air filter.
4. Removed and checked piston and rings.
5. Replaced spark plug.
6. Replaced chain.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
5
Average Rating (out of 5):
1 Reviews
Click to filter by ratings:
5 stars
1
4 stars
0
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • fuel line
    this was a perfect fit for the pole saw
    Guest - 17 days ago Verified Purchase
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    NEXT >
    visa mastercard discover american express PayPal
    HACKER SAFE certified sites prevent over 99.9% of hacker crime.

    fancyboxy