eReplacementParts.com
877-346-4814
Husqvarna Parts
Filter

Filter

Part Number: 530150253
HusqvarnaJonsered
Availability: 25+ in stock
Price: $2.99
Ships within 1 business day
Product Information
Manufacturer: Husqvarna, Jonsered
Product Number: 530150253
Classification: Part
Weight: 0.01 lbs.
Shipping: Ships Worldwide
Description:
This is a genuine Husqvarna replacement part, it is sold individually.
The purpose of this filter is to keep dirt and other small particles from entering the carburetor and engine and causing internal engine damage.

Once this type of filter gets clogged or dirty it should be changed (Not Cleaned). This is to prevent restricted air flow and foreign matter from entering the engine.

Compatibility

This part is compatible with the following machines:

Husqvarna
Jonsered
Expand the 74 compatible machines
Products Compatibility

This item works with the following types of products:

  • • Edger
  • • Trimmer
Questions & Answers

Will this air filter fit my Jonsered GT 2128 gas trimmer?
William Martin asked on 2019-07-28
Hi William, part 530150253 will fit your model GT 2128. Thank you for your question and good luck with your repair!
Repair Instructions: Submitted by Customers Like You
2 of 2 people found this instruction helpful
Tool Type:
Trimmer
Parts Used:
Filter - 530150253
Carburetor Kit - 545081848
Gasket Foam Kit - 545008084
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers, Nutdriver
Would not start. Carburator was plugged up and would not deliver fuel with plunge bulb. Tried carb and choke cleaner. Spark was good.
1st Drain remaining fuel and discard. Unpacked the new parts and familiarized with all.Took off cover with nut driver. Discarded used air filter and replaced it with the new one and set it aside. The throttle cable and fuel tubing were removed with needle nose pliers. Removed the old carburetor. Removed old gasket and installed the new. Replaced the old carb with the new. Without cover the carb is loose for attaching the throttle cable first and then the fuel tubing. Used needle nose pliers to attach the throttle cable and to attach the tubing to the new carb and carefully slid them up snug to the carb. Tested the throttle and it worked properly. Replaced cover. Tightened cover nuts with nut driver. Added fresh oil and gas mix. Pumped the new plunge bulb about 4 to 6 times, with no throttle pulled 2 times at full choke, and then on 3rd pull at half choke it fired up. I let it warm up for10+/- seconds and flipped off the choke. Idle is slightly high but haven't changed it with the idle adjust screw yet. Went right work and it ran for about 2 hours like it was brand new.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Trimmer
Parts Used:
Filter - 530150253
Carburetor Kit - 545081848
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Socket set
Needed new carburetor to run right
Removed filter
Removed two nuts
Removed fuel lines
Removed throttle control removed gasket
Began replacing new parts in reverse order of removal
Primed system
Followed starting instructions
Began using
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Trimmer
Parts Used:
Filter - 530150253
Kit, Driveshaft Upper - 575261201
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Flex shaft would not stay engaged
removed old drive shaft and replace with new one
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Trimmer
Parts Used:
Filter - 530150253
Air Box Cover - 530057846
Air Filter Cover Knob - 530059796
Kit Driveshaft Lower Cd - 545180847
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, Fingers
The lower drive shaft and head froze up
Removed bad part and inserted new, worked better than ever, thank you for your response time
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Trimmer
Parts Used:
Filter - 530150253
Air Box Cover - 530057846
Air Filter Cover Knob - 530059796
Housing, Throttle (RH) - 545223001
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, None
Filter cover was missing and filter dirty, handle was broken.
Disassembled and replace the replaced the handle cover and replaced the filter and cover.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Trimmer
Parts Used:
Nut - 530016101
Fl-Wash. .53 I.D. X 1.25 O.D. X .10 - 936-0179
Flanged Lock Nut - 712-04065
Click Pin - 753-04070
Filter - 530150253
Air Box Cover - 530057846
Air Filter Cover Knob - 530059796
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Socket set, Hands
Missing parts that were ordered
Just installed parts per the diagram.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Trimmer
Parts Used:
Filter - 530150253
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Filter change.
1. Removed the plastic cover by loosening the thumb screw.
2. Removed the old filter and placed the new filter in its place.
3. Replaced the cover and tightened the thumb screw.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Trimmer
Parts Used:
Filter - 530150253
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Air filter clogged
Unscrewed the one air filter cover knob with fingers
Removed clogged air filter by prying filter out with pocket knife
Pushed new air filter into filter box with fingers
Replaced filter box cover and secured by tightening knob screw
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Trimmer
Parts Used:
Fuel Filter - 530095646
Filter - 530150253
Module - 545046701
Carburetor Kit - 545081848
Repair Difficulty:
Easy
Time Spent Repairing:
1-2 hours
Tools Used:
Screwdriver, Pliers, Socket set, Torx bits
Huskquvnara line trimmer wouldn't start or if did would not stay running.
Installed the parts ordered. Replaced the old with the new. The trimmer started and ran excellent.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Trimmer
Parts Used:
Filter - 530150253
Air Box Cover - 530057846
Air Filter Cover Knob - 530059796
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, None needed
Knob came loose and parts were lost
Simply replaced filter, housing and knob that holds parts on. Took less than 1 min
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
4.9
Average Rating (out of 5):
8 Reviews
Click to filter by ratings:
5 stars
7
4 stars
1
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Maintenance problem solved
    Needed this filter, tried shopping at store where machine was purchased, no luck. One minute on e-replacement and it is on the way. Received quickly fits perfect.
    Guest - November 25, 2019 Verified Purchase
    needed part
    quick delivery, worked to perfection, weed eater working like new.
    Guest - July 6, 2019 Verified Purchase
    easy repair
    Intake air filter was a simple 30 seconds replacement
    Guest - June 27, 2019 Verified Purchase
    Husqvarna weed wacker filter
    Fit like a glove. The cover was a perfect fit too.
    greg - June 22, 2019 Verified Purchase
    Exact fit
    Exact fit. Accurate part and expedient delivery.
    Jerry - June 12, 2019 Verified Purchase
    Exact Replacement
    Part received quickly after an easy order process. Once you enter brand and model the parts list presents itself nicely. Price is competitive to local dealers.
    Guest - June 11, 2019 Verified Purchase
    Easy repair
    Great
    Guest - June 10, 2019 Verified Purchase
    Great part
    Part arrived quickly. Weed eater working great now!
    Guest - August 3, 2019 Verified Purchase
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    NEXT >
    Product Information
    Manufacturer: Husqvarna, Jonsered
    Product Number: 530150253
    Classification: Part
    Weight: 0.01 lbs.
    Shipping: Ships Worldwide
    Related Products
    eReplacementParts.com
    7036 South High Tech Dr.
    Midvale, UT 84047
    visa mastercard discover american express PayPal

    fancyboxy