eReplacementParts.com
877-346-4814
Poulan Parts
Repair Parts Home  Power Tool Parts  Poulan Parts  530071835 Purge Bulb Kit

Install
Videos!
Grid squares measure 1x1 inch

Purge Bulb Kit 530071835

Part Number: 530071835
PoulanJonseredHusqvarnaWeed Eater
Availability: In Stock
Price: $8.54
Ships within 1 business day

*This part replaces obsolete part #: 530047213.

Product Information
Description:
This is a genuine Poulan replacement part, and sold individually.
By pressing on the Purge Bulb, it will force fuel into the fuel line from the fuel tank into the carburetor.
Once the carburetor is full of fuel, the excess fuel will be purged back into the tank in the fuel return line.

At some time the primer will lose its elasticity or crack and need to be replaced.

We have an article and video on

Frequently Purchased With
Compatibility

This part is compatible with the following machines:

Poulan
1900 Gas Chain Saw
1900 Gas Chain Saw
1950 Type 1 Gas Chain Saw
1950 Type 1 Gas Chain Saw
1950 Type 2 Gas Chain Saw
1950 Type 2 Gas Chain Saw
1950 Type 3 Gas Chain Saw
1950 Type 3 Gas Chain Saw
1950 Type 4 Gas Chain Saw
1950 Type 4 Gas Chain Saw
1950 Type 5 Gas Chain Saw
1950 Type 5 Gas Chain Saw
1950 Type 6 Gas Chain Saw
1950 Type 6 Gas Chain Saw
1950 Type 7 Gas Chain Saw
1950 Type 7 Gas Chain Saw
1950LE Type 1 Gas Chain Saw
1950LE Type 1 Gas Chain Saw
1950LE Type 2 Gas Chain Saw
1950LE Type 2 Gas Chain Saw
1975 Type 1 Gas Chain Saw
1975 Type 1 Gas Chain Saw
1975 Type 2 Gas Chain Saw
1975 Type 2 Gas Chain Saw
1975 Type 3 Gas Chain Saw
1975 Type 3 Gas Chain Saw
1975 Type 4 Gas Chain Saw
1975 Type 4 Gas Chain Saw
1975 Type 5 Gas Chain Saw
1975 Type 5 Gas Chain Saw
1975 Type 6 Gas Chain Saw
1975 Type 6 Gas Chain Saw
1975 Type 7 Gas Chain Saw
1975 Type 7 Gas Chain Saw
1975LE Type 1 Gas Chain Saw
1975LE Type 1 Gas Chain Saw
1975LE Type 2 Gas Chain Saw
1975LE Type 2 Gas Chain Saw
2025 Gas Chain Saw
2025 Gas Chain Saw
2050 Type 1 Gas Chain Saw
2050 Type 1 Gas Chain Saw
2050 Type 2 Gas Chain Saw
2050 Type 2 Gas Chain Saw
2050 Type 3 Gas Chain Saw
2050 Type 3 Gas Chain Saw
2050 Type 4 Gas Chain Saw
2050 Type 4 Gas Chain Saw
2050 Type 5 Gas Chain Saw
2050 Type 5 Gas Chain Saw
2050 Type 6 Gas Chain Saw
2050 Type 6 Gas Chain Saw
2050 Type 7 Gas Chain Saw
2050 Type 7 Gas Chain Saw
2055 Type 1 Gas Chain Saw
2055 Type 1 Gas Chain Saw
2055 Type 2 Gas Chain Saw
2055 Type 2 Gas Chain Saw
2055 Type 3 Gas Chain Saw
2055 Type 3 Gas Chain Saw
2055 Type 4 Gas Chain Saw
2055 Type 4 Gas Chain Saw
2055 Type 5 Gas Chain Saw
2055 Type 5 Gas Chain Saw
2055 Type 6 Gas Chain Saw
2055 Type 6 Gas Chain Saw
2055 Type 7 Gas Chain Saw
2055 Type 7 Gas Chain Saw
2050LE Type 1 Gas Chain Saw
2050LE Type 1 Gas Chain Saw
2050LE Type 2 Gas Chain Saw
2050LE Type 2 Gas Chain Saw
2050WT Type 1 Gas Chain Saw
2050WT Type 1 Gas Chain Saw
2050WT Type 2 Gas Chain Saw
2050WT Type 2 Gas Chain Saw
2050WT Type 3 Gas Chain Saw
2050WT Type 3 Gas Chain Saw
2050WT Type 4 Gas Chain Saw
2050WT Type 4 Gas Chain Saw
2050WT Type 5 Gas Chain Saw
2050WT Type 5 Gas Chain Saw
2050WT Type 6 Gas Chain Saw
2050WT Type 6 Gas Chain Saw
2050WT Type 7 Gas Chain Saw
2050WT Type 7 Gas Chain Saw
2055LE Type 1 Gas Chain Saw
2055LE Type 1 Gas Chain Saw
2055LE Type 2 Gas Chain Saw
2055LE Type 2 Gas Chain Saw
2075 Type 1 Gas Chain Saw
2075 Type 1 Gas Chain Saw
2075 Type 2 Gas Chain Saw
2075 Type 2 Gas Chain Saw
2075 Type 3 Gas Chain Saw
2075 Type 3 Gas Chain Saw
2075 Type 4 Gas Chain Saw
2075 Type 4 Gas Chain Saw
2075 Type 5 Gas Chain Saw
2075 Type 5 Gas Chain Saw
2075 LE Gas Chain Saw
2075 LE Gas Chain Saw
2075C Type 1 Gas Chain Saw
2075C Type 1 Gas Chain Saw
2075C Type 2 Gas Chain Saw
2075C Type 2 Gas Chain Saw
2075C Type 3 Gas Chain Saw
2075C Type 3 Gas Chain Saw
2075C Type 4 Gas Chain Saw
2075C Type 4 Gas Chain Saw
2075C Type 5 Gas Chain Saw
2075C Type 5 Gas Chain Saw
2075OC Type 1 Gas Chain Saw
2075OC Type 1 Gas Chain Saw
2075OC Type 2 Gas Chain Saw
2075OC Type 2 Gas Chain Saw
2075OC Type 3 Gas Chain Saw
2075OC Type 3 Gas Chain Saw
2075OC Type 4 Gas Chain Saw
2075OC Type 4 Gas Chain Saw
2075OC Type 5 Gas Chain Saw
2075OC Type 5 Gas Chain Saw
2150 Type 1 Gas Chain Saw
2150 Type 1 Gas Chain Saw
2150 Type 2 Gas Chain Saw
2150 Type 2 Gas Chain Saw
2150 Type 3 Gas Chain Saw
2150 Type 3 Gas Chain Saw
2150 Type 4 Gas Chain Saw
2150 Type 4 Gas Chain Saw
2150 Type 5 Gas Chain Saw
2150 Type 5 Gas Chain Saw
2150 Type 6 Gas Chain Saw
2150 Type 6 Gas Chain Saw
2150 Type 7 Gas Chain Saw
2150 Type 7 Gas Chain Saw
2150 Predator Type 1 Gas Chain Saw
2150 Predator Type 1 Gas Chain Saw
2150 Predator Type 2 Gas Chain Saw
2150 Predator Type 2 Gas Chain Saw
2150 Predator Type 3 Gas Chain Saw
2150 Predator Type 3 Gas Chain Saw
2150 Predator Type 4 Gas Chain Saw
2150 Predator Type 4 Gas Chain Saw
2150 Predator Type 5 Gas Chain Saw
2150 Predator Type 5 Gas Chain Saw
2150 Predator Type 6 Gas Chain Saw
2150 Predator Type 6 Gas Chain Saw
2150LE Type 1 Gas Chain Saw
2150LE Type 1 Gas Chain Saw
Expand the 150+ compatible machines
Products Compatibility

This item works with the following types of products:

  • • Chain Saw
  • • Saw
Repair Guides
Articles:
Replacing primer bulbs in small engines is one of the most common types of tool repairs, and this article explains profe...
June 25, 2010

Questions & Answers for Purge Bulb Kit


The primer bulb for my chain saw has a larger line to the tank and a smaller line to the carb. Does this part fit this description, or does it have 2 small ports?
Bill for model number PP210 asked on 2022-05-06
Hello, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is Part Number: 530071835. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
eReplacementParts Team May 06, 2022
Does this fit poulan pro 260 42cc
Brad asked on 2022-02-08
Hello Brad, Thank you for your inquiry. We have researched the model number you have provided and confirm that this part is compatible to your model. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
eReplacementParts Team February 08, 2022
Repair Instructions: Submitted by Customers Like You
38 of 41 people found this instruction helpful
Tool Type:
Chain Saw
Parts Used:
Fuel Line - 530069247
Foam Air Filter - 530037793
Purge Bulb Kit - 530071835
Fuel Filter - 530095646
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Pliers, Socket set, Nutdriver, hemo-stats to grab fuel line to pull through tank
All fuel lines dissolved from age,crumbled and broken.
I have 1996 poulan 2550 super clean 18" chain saw , last used it in 2005,pulled out of storage to use and primer bulb was cracked, so I purchased new fuel lines,bulb,air and fuel filter. The repair went fairly easy, 3 screws to remove air filter top cover, 4 screws side cover with pull start, 2 nuts that retain air plenum,and carburetor, disconect throttle linkage with needlenose pliers,move air plenum with throttle cable to left side, then able to slide carb and choke lever back to gain access to tank inlet(left side) and return(right side). Removed old line stuck in inlet and return with small diameter philips screw driver,they just tapped through, fished out old fuel filter and bits of old line with hemo stats, new fuel lines had diagonal cut at end which I put white lube on outside of hose at end and fed through holes, large dia is return,small dia is feed,enough to reach in with hemo stats and tug through( hardest part of repair).The next hardest part was figuring out lines, I found a youtube that ereplacementparts did in 2009 that helped me determine that starting from bulb center large dia to return in tank,small dia from bulb goes to top rh side of carb,bottom left side of carb to small dia inlet side of tank, pulled small line from tank and put fuel filter on, lays flat on bottom of tank.I slid the carb back down on studs making sure fuel lines are clear , move air plenum up to carb,then install throttle linkage with needle nose pliers,push air plenum on studs and thread nuts on and tighten evenly , put dab of 30w non detergent oil on foam air cleaner worked in, plulled spark plug , was clean and in good condition. replaced starter housing and top cover, repair time was approximately 1 hour, including coffee break, everything worked fine. Don :)
Did you find this story helpful?
Thanks for voting and helping fellow customers!
11 of 12 people found this instruction helpful
Tool Type:
Chain Saw
Parts Used:
Fuel Line - 530069247
Purge Bulb Kit - 530071835
Spark Plug - 130-241
Repair Difficulty:
Easy
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Pliers, Hemastats
Fuel bulb and lines were brittle and broken
Lubrication on new fuel lines was necessary to get them on the barb fittings. Had to stretch and pull the fuel line to get it through the hole that goes from the fuel tank to the carburetor, use lube! Removed the screws that held the purge bulb and replaced the fuel lines.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
12 of 15 people found this instruction helpful
Tool Type:
Chain Saw
Parts Used:
Purge Bulb Kit - 530071835
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Power Drill
Cracked primer bulb
Remove protective plate. Remove old primer bulb with new one, after confirming that old fuel lines were still pliable and usable.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
4 of 4 people found this instruction helpful
Tool Type:
Chain Saw
Parts Used:
Purge Bulb Kit - 530071835
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Pliers
Wasn't getting any fuel. Primer bulb was cracked.
Unscrewed the cover. Unplugged the hoses. Plugged the new one up and screwed it down. Replaced the cover. BAM!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
4 of 4 people found this instruction helpful
Tool Type:
Chain Saw
Parts Used:
Fuel Line - 530069247
Purge Line - 530069216
Purge Bulb Kit - 530071835
Oil Cap Assembly - 530057236
Fuel Cap Assembly - 580940901
Repair Difficulty:
Medium
Time Spent Repairing:
1-2 hours
Tools Used:
Screwdriver, Pliers, Socket set, Wrench Set, Nutdriver
Replaced purge bulb, fuel lines and oil/gas caps
The most difficult part of the repair was threading new fuel lines from carb chamber into fuel tank. I recommend viewing some YouTube vids covering this repair. I repaired an ~15 yr old Poulan 16" chain saw with parts from eReplacementPart. Thanks to eReplacementParts for your help!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Chain Saw
Parts Used:
Fuel Line - 530069247
Foam Air Filter - 530037793
Purge Bulb Kit - 530071835
Air Purge - 503936601
Fuel Filter - 530095646
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Nutdriver
Fuel bulb cracked, fuel lines old, fuel pickup clogged
1. Removed pull starter and air filter covers.
2. Removed air filter and carburetor.
3. Removed old fuel bulb
4. Removed old fuel pickup and fuel line from tank.
5. Measured new fuel line, installed into tank, attached new pickup and connected other end to carburetor supply port.
6. Measured, cut, and installed new fuel lines from carburetor to fuel bulb and bulb to tank vent.
7. Installed new fuel bulb being careful to avoid kinks in fuel lines.
8. Reinstalled carburetor, air cleaner and pull starter covers.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Chain Saw
Parts Used:
Purge Bulb Kit - 530071835
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers, hex keys
Fuel line and purge bulb
Remove housing using screwdriver and or hex key, replace old fuel lines with new lines. Then replace purge bulb . Fill with gas/oil mixture.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Chain Saw
Parts Used:
Purge Bulb Kit - 530071835
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Purge bulb split
I was very easy to replace the purge bulb, mainly because of the instructions that came with it.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Chain Saw
Parts Used:
Purge Bulb Kit - 530071835
Oil Cap Assembly - 530057236
Fuel Cap Assembly - 580940901
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers, Power Drill, Socket set
Cracked purge bulb and fuel lines. leakage bar chain oil
I followed the installation instructions that were included with the purge bulb. Then just replaced the oil and fuel caps with the new ones.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Chain Saw
Parts Used:
Fuel Line Fitting - 530023877
Foam Air Filter - 530037793
Purge Bulb Kit - 530071835
Fuel Cap Assembly - 580940901
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers
Replaced Fuel lines
Replaced fuel line and other items on chain saws and the parts cost less from here then buying then local. Also looked at youtube. But I will get all my parts from this web site because I like their prices and delivery time.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
4.8
Average Rating (out of 5):
34 Reviews
Click to filter by ratings:
5 stars
30
4 stars
3
3 stars
0
2 stars
1
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
  • 2
  • 3
NEXT >
  • Just What I Needed
    Original priming bulb went bad so a relative gave me the saw. This was exactly what I needed and installation was simple. Thanks for a great repair parts and quick delivery.
    Bob - September 7, 2023 Verified Purchase
    Exceeded Expectations
    The parts that were received on a timely basis were perfect replacements and even can with instalment instructions.
    Guest - August 14, 2023 Verified Purchase
    Easy repair
    Arrived quickly. Easy repair
    Guest - July 25, 2023 Verified Purchase
    Works Great!
    I bought this for my Poulan chainsaw and it fixed my issue. The saw started right up after priming. The original bulb assembly had a large and small size connection. This one has two small size connections for the fuel lines. No problem, though. I trimmed the end off of the larger fuel line and it fit onto this one.
    Guest - April 11, 2022 Verified Purchase
    worked as expected
    part was correct, worked as expected, delivery was slow.
    Guest - January 14, 2022 Verified Purchase
    Replacement part worked well...
    I am so excited that my replacement purge bulb worked perfectly. It fit perfectly and my chainsaw works fine now. 5 out of 5 stars for product and for shipping. Awesome product
    Guest - December 18, 2021 Verified Purchase
    easy repair
    Arrived quickly,an fit perfect.Chainsaw runs like new.
    Bret - October 25, 2021 Verified Purchase
    Chain saw replacement part
    Perfect fit
    Guest - September 9, 2021 Verified Purchase
    Great part replacement
    Exactly the part I was looking for and reasonably priced. The picture made it easy to match up the one I had to replace.
    Guest - August 12, 2021 Verified Purchase
    Fit perfectly
    Fits perfectly
    Guest - July 30, 2021 Verified Purchase
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    • 2
    • 3
    NEXT >
    Product Information
    Repair Guides
    Articles:
    Replacing primer bulbs in small engines is one of the most common types of tool repairs, and this article explains profe...
    June 25, 2010
    eReplacementParts.com
    7174 South 400 West
    Suite 5
    Midvale, UT 84047
    visa mastercard discover american express PayPal