This is an authentic OEM sourced replacement part. This special fuel pipe assembly is used to deliver gasoline from the tank to the carburetor. When the primer bulb is pressed, fuel will be forced through this line into the carburetor. It is made out of flexible plastic and it is sold individually. Please note, clips, joints and the fuel filter are all sold separately.
This is a genuine OEM part. The fuel line grommet w/vent tube is constructed of plastic parts and is compatible with trimmers, edgers, blowers and brushcutters. This item is fastened onto the fuel tank, moving the fuel to the breather assembly. This Shindaiwa part is sold individually. The fuel tank assembly (P021028090) also includes this component. A screwdriver is often helpful in the removal and replacement. Please be sure to refer to specific manual and diagrams for repair instructions.
This replacement fuel pipe is a high-quality OEM sourced component which is specially designed for use with Shindaiwa hedge trimmers. The purpose of this tube is to deliver the fuel from the tank into the carburetor. When you press the primer bulb, it will purge all the air out of the carburetor and fill its chambers with fuel. The excess fuel is then forced back into the tank through the return line which is sold separately. Over time fuel pipes tend to become brittle and may crack eventually requiring replacement, please note this durable plastic item is sold individually.
This part is supplied directly from the original equipment manufacturer. The plastic suction pipe is compatible with many lawn and garden engines. This item is often secured to the joint and check valve in the fuel filter assembly, providing clean fuel to the engine. A screwdriver, pair of pliers and a wrench set are required for the proper installation. The suction pipe is sold individually. However, it is also included in the fuel filter assembly (A037000000).
It is a genuine item that is supplied by the original manufacturer for use with gas powered Shindaiwa and Echo trimmers and brush cutters. This replacement pick-up tube is used to deliver fuel from the tank into the carburetor, it is the line that the in-tank fuel filter is attached to. Over time the material may begin to deteriorate and crack eventually requiring replacement for safe operation. It is made of durable flexible rubber and it is sold individually, please note the other components such as return and vent tubes are all sold separately.
This is an authentic Shindaiwa replacement part manufactured for use with Shindaiwa trimmers. This special fuel line is used to return the fuel back to the tank when priming the carburetor, so it is the shorter line. The return fuel line is sold as an individual replacement part.
This is a genuine OEM part. The fuel pipe sub assembly is compatible with Shindaiwa Brushcutter models. Composed of metal, wiring and plastic, this item is secured to the fuel filter assembly delivers gasoline from the tank to the carburetor. This item is sold individually, and a hex key is needed for the repair.
This is a genuine OEM sourced replacement part, it is specially produced for Shindaiwa gas powered trimmers and brushcutters. The purpose of this fuel line is to supply fuel from the tank to carburetor. By pressing the primer bulb it will fill the carburetor with fuel, once it is full the excess fuel will be forced back into the tank through the fuel return line which is sold separately. It is made of durable plastic material and it is sold individually.
This tube is an authentic replacement part provided by the original equipment manufacturer. It is used in Shindaiwa machines such as trimmers, edgers, and and blowers. This tube is made of plastic, and it should be replaced if it is kinked or punctured. It is sold individually and is not difficult to replace.
This is an authentic Shindaiwa replacement part manufactured for use with outdoor power equipment. The fuel line kit is a complete assembly include the pick-up and return lines, the grommet, vent tube, and fuel filter. This fuel pipe kit is sold as an individual replacement part.
The pipe is utilized on equipment to supply fuel to the engine. Over time the material will wear out and it may begin to crack eventually requiring a replacement. This high-quality fuel pipe is made of durable rubber material and is sold individually. Make sure to refer to the parts diagrams for your model to ensure the correct repair procedure. This is a genuine manufacturer-supplied part that is made for use with Shindaiwa handheld lawn and garden equipment.
This is an OEM part sourced directly from the manufacturer. The fuel pick-up tube is designed for use in Shindaiwa yard tools such at trimmers, blowers, and brushcutters. This part is made of flexible rubber, and is used to carry fuel through the machine. You may require an Allen wrench and pliers when replacing this part. This item is sold individually.
This is an authentic replacement component for Shindaiwa equipment. The fuel return tube is designed to take the excess fuel not used by the carburetor back to the gas tank to be reused. The part is made of high-quality gasoline resistant tubing. This item is sold individually.
This is an authentic Shindaiwa replacement part, sourced from the original manufacturer for use with outdoor power equipment. The special fuel tube is used to return excess fuel to the gas tank assembly. This return line is available as an individual replacement part, please see illustrated part list for associative parts.