866-322-9842
Mon-Fri 7am-1am EST
Sat-Sun 7am-11pm EST
Repair Parts Home  Bosch Parts  Bosch Demolition Hammer Carbon Brushes

Bosch Demolition Hammer Carbon Brushes

Brush Set
Part Number: 1617014126
In Stock, 25+ available
Genuine Bosch replacement part, these are sold in a set of two.

• Worn brushes are often the cause of a poorly running motor
• Replacing brushes can fix an intermittent motor
• New brushes can restore a motor’s electric braking


Carbon motor brushes are one of the most commonly replaced power tool components. Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement. Worn brushes are common causes of intermittent motor function, reduced electric braking, and reduced motor power. A worn out brush will often be worn down near the wire lead and may be cracked, pitted, or burned. When replacing carbon brushes, be sure to also inspect your armature for burns, cracks, or other damage which indicates a larger motor problem.

Carbon Brush Set
Part Number: 1617014144
In Stock, 18 available
This is a Genuine Manufacturer Sourced replacement part used on certain Bosch Rotary Hammers. This item includes Two (2) Carbon Brushes with Lead Wires Attached.

Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.
Carbon Brush Set
Part Number: 1617000425
In Stock, 25+ available
This is a genuine Bosch replacement part, it is sold as a set (2).

Worn brushes frequently are the cause behind a motor running poorly.
• Replacing brushes can fix a motor that’s operating intermittently.
• New brushes can restore a motor’s electric braking.


Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.

Carbon Brush Set
Part Number: 1617014138
In Stock, 16 available
This is an OEM Sourced replacement part designed for Bosch Hammers. This set includes Two (2) Carbon Brushes with Lead Wires attached. Please note Brush Holders and Springs are Sold Separately.

Carbon motor brushes are one of the most commonly replaced power tool components. Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement. It is recommended to replace both brushes at the same time.

You would need a Screwdriver and Pliers to complete this job.
Carbon Brush Set
Part Number: 1617014135
In Stock, 25+ available
Genuine Manufacturer Approved replacement part designed for certain Bosch Rotary Hammers. This is a Set of 2 Carbon Brushes with wire lead attached.

Carbon motor brushes are one of the most commonly replaced power tool components. Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement. Worn brushes are common causes of intermittent motor function, reduced electric braking, and reduced motor power. A worn out brush will often be worn down near the wire lead and may be cracked, pitted, or burned. When replacing carbon brushes, be sure to also inspect your armature for burns, cracks, or other damage which indicates a larger motor problem.
Carbon Brush Set
Part Number: 2604321914
In Stock, 25+ available
Genuine Bosch replacement part
rnSet of 2 Carbon Brushes with wire lead and brush spring attached – Includes two sets of detachable brackets to allow installation into various tools.rnrnrn

• Worn brushes are often the cause of a poorly running motor
• Replacing brushes can fix an intermittent motor
• New brushes can restore a motor’s electric braking


Carbon motor brushes are one of the most commonly replaced power tool components.  Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement.  Worn brushes are common causes of intermittent motor function, reduced electric braking, and reduced motor power.  A worn out brush will often be worn down near the wire lead and may be cracked, pitted, or burned.  When replacing carbon brushes, be sure to also inspect your armature for burns, cracks, or other damage which indicates a larger motor problem.

Carbon-Brush Set
Part Number: 1617014122
In Stock, 10 available
Genuine Bosch replacement part

Set of 2 Carbon Brushes with wire lead attached.

• Worn brushes frequently are the cause behind a motor running poorly.
• Replacing brushes can fix a motor that’s operating intermittently.
• New brushes can restore a motor’s electric braking.


Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.

Carbon Brush Set
Part Number: 1617014143
In Stock, 17 available
This carbon brush set is specially designed for Bosch jack-hammers. It is a genuine OEM sourced item, not an aftermarket equivalent. Carbon brushes are some of the most commonly replaced items on power tools. Through friction and regular use they will gradually wear away requiring replacement. This set includes (2) carbon brushes with lead wires attached. Please note, brush holders and other parts are all sold separately. You will need a screwdriver to complete this repair.
Carbon Brush Set
Part Number: 1617014110
In Stock, 10 available
Genuine Bosch replacement part
Set of 2 Carbon Brushes with wire lead attached.

• Worn brushes are often the cause of a poorly running motor
• Replacing brushes can fix an intermittent motor
• New brushes can restore a motor’s electric braking


Carbon motor brushes are one of the most commonly replaced power tool components.  Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement.  Worn brushes are common causes of intermittent motor function, reduced electric braking, and reduced motor power.  A worn out brush will often be worn down near the wire lead and may be cracked, pitted, or burned.  When replacing carbon brushes, be sure to also inspect your armature for burns, cracks, or other damage which indicates a larger motor problem.

Brush Holder
Part Number: 1600A005AF
In Stock, 6 available
This genuine manufacturer approved replacement part is designed for use with Bosch hammers. This assembly holds carbon brushes around the armature. It consists of a plastic holder ring, two (2) metal brush holders with springs and two (2) carbon brushes with lead wires attached.

To replace this assembly you would need a screwdriver.

• First remove screws holding the housing together
• Carefully separate housing to gain access to armature and brush holder
• Disconnect the wires
• Remove the screws holding brush card assembly
• Remove old brush holder and install the new assembly
• Reassemble and test your tool
Brush Holder
Part Number: 1614336045
In Stock, 5 available
This is an authentic manufacturer-sourced component which is specially designed for use with Bosch demolition hammers. This part consists of a plastic holder ring, two metal brush holders with springs and two carbon brushes with attached lead wires. Brushes are important components of an electric motor because they conduct the current from the armature. unfortunately, over time they will wear out and may begin to fail eventually requiring a replacement to ensure best performance. Please make sure to check the owners manual and the appropriate diagrams of your model for the correct installation of the new brush holder.
Brush Holder
Part Number: 1614336041
Ships in 5 - 11 business days
This genuine manufacturer-sourced part is specially designed for use with Bosch rotary hammer drills. The purpose of this part is to secure carbon brushes, please make sure to check the appropriate diagrams of your model for the correct location and application of this component. This high-quality item is sold individually, keep in mind it includes a durable plastic ring, two metal brush holders and two carbon brushes with attached lead wires.
Brush Holder
Part Number: 1614336046
Ships in 5 - 11 business days
This is an authentic Bosch replacement part, sourced from the original manufacturer for use with rotary hammers. The special brush holder is a complete part assembly that includes the carbon brushes, the springs and the holders. This brush holder is available as an individual replacement part, please see model diagram for associative parts.
Brush Holder
Part Number: 1617000397
In Stock, 10 available
This is an authentic Bosch replacement part, sourced from the original manufacturer for use with rotary hammers. This is a complete part assembly that includes the carbon brushes, the holders, and the brush springs. These brush holders are available in pairs and the pairs are sold individually.
Carbon-Brush Set
Part Number: 1617014139
In Stock, 3 available
This is an authentic manufacturer-sourced part that is specially made for Bosch rotary hammers. The purpose of a brush is to conduct the current in an electric motor, unfortunately, over time the material will wear out and the brushes will need to be replaced to maintain peak performance. Please make sure to refer to the owners manual and the appropriate diagrams of your model for the correct location and application of this component. Keep in mind this high-quality carbon brush is sold in a pack of two. Note, the #1617000397 Brush Holder is sold separately.
Carbon-Brush Set
Part Number: 1617014108
In Stock, 6 available
This is an authentic Bosch replacement part that has been sourced from the original manufacturer to be used with demolition hammers. The carbon brushes press against the commutator bars on the armature to supply electricity. The brushes eventually wear down because they are pressed against a rotating part. The brushes are sold in pairs. A screwdriver and needle nose pliers may be needed for this repair.
Brush Guide
Part Number: 1614336017
In Stock, 5 available
Brush Holder
Part Number: 1604336017
In Stock, 1 available
This is a genuine OEM sourced replacement part that is intended to be used with reciprocating saws, demolition hammers, angle grinders, and shears from Bosch. The metal holder is used as a bracket that supports the carbon brushes. This item is sold as an individual replacement part.
Brush Holder
Part Number: 1614336000
Ships in 5 - 11 business days
Tool Holder Assembly
Part Number: 1617000850
Ships in 5 - 11 business days
Show More
no image
Part Number:
visa mastercard discover american express PayPal
HACKER SAFE certified sites prevent over 99.9% of hacker crime.

fancyboxy