866-322-9842
Mon-Fri 7am-1am EST
Sat-Sun 7am-11pm EST
Repair Parts Home  Power Tool Parts  Bosch Parts  1617014126 Brush Set

Brush Set

Part Number: 1617014126
Bosch
Availability: 25+ in stock
Price: $14.09
Quantity:
Order within the next 11 hours
and your part ships today!
Description:
Genuine Bosch replacement part, these are sold in a set of two.

• Worn brushes are often the cause of a poorly running motor
• Replacing brushes can fix an intermittent motor
• New brushes can restore a motor’s electric braking


Carbon motor brushes are one of the most commonly replaced power tool components. Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement. Worn brushes are common causes of intermittent motor function, reduced electric braking, and reduced motor power. A worn out brush will often be worn down near the wire lead and may be cracked, pitted, or burned. When replacing carbon brushes, be sure to also inspect your armature for burns, cracks, or other damage which indicates a larger motor problem.

Product Information
Manufacturer: Bosch
Product Number: 1617014126
Classification: Part
Weight: 0.03 lbs.
Also Known As: Carbon Brush Set , Motor Brush Set
Shipping: Ships Worldwide
Products Compatibility

This item works with the following types of products:

  • • Demolition Hammer
  • • Rotary Hammer
Questions & Answers

No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
5 of 7 people found this instruction helpful
Tool Type:
Demolition Hammer
Parts Used:
Power Cord - 1604460092
Brush Set - 1617014126
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Metric large Allen wrench 10 mm I believe.
Not running.
Always check cord and brushes first. in 5 of the last tools I repaired brushes were needed. The cord was broken at the strain relief. To replace the brushes I removed the motor housing, which exposed the brushes. Pull the springs back and rested them on the brush holder. Disconnected the old brushes and installed the new ones. For the cord. I removed the handle then unscrewed the cord clamp.Removed the cord leads from the switch, removed the cord relief, slid the cord relief on the new cord, then connected the cord leads to the switch.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Demolition Hammer
Parts Used:
Cheese Head Screw - 2914551114
Brush Set - 1617014126
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, allen set
Brushes worn badly and screws missing from vibration
To get at the brushes on a Bosch chipping gun, remove the screws that hold the trigger handle (two are under the switch plate just pop it off with a screwdriver) slid out the brush covers, using a dental tool pull the spring up away from the brush and pull the brush out, replace with new brush, pull off the wire connector and replace with new. slide covers back in and put handle cover back on. Pop the switch plate back on, may have to move it back and forth a little to get back in position.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Demolition Hammer
Parts Used:
Brush Set - 1617014126
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Pliers
Service light came on
Pulled off cover that mounted the armature of the motor. Pulled the removable electrical clips off of that assembly. Massaged the part that holds the brushes to clear the armature and the housing. I did not separate them which would have required a puller. I was able to carefully replace each of the brushes with the new ones. Reassembled with gear grease on the gears on the other end of the motor. Tested, and it is back in service with the service light extinguished.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Demolition Hammer
Parts Used:
Brush Set - 1617014126
Chuck Cover - 450894-7
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Power Drill
Brush, Chuck cover
Replaced the old with the new.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Discussion
Discussion for Brush Set - ( 1617014126 )
Discussion is closed. To ask our experts a question about a part, use the Q&A feature.
visa mastercard discover american express PayPal
HACKER SAFE certified sites prevent over 99.9% of hacker crime.

fancyboxy