This is an authentic OEM replacement part used on Gas Trimmers, it is sold individually. This is just the Foam Filter, Cover and the Base Assembly are sold separately. The purpose of this filter is to keep dirt and other small particles from entering the engine and causing internal engine damage. Once this type of filter gets clogged or dirty it should be changed (Not Cleaned).
This is an OEM sourced replacement part used on Shindaiwa trimmers. Its purpose is to filter out dust and debris from contaminating the carburetor and engine. When replacing the filter you can open the package in comes in and put a bit of two cycle oil in the bag and let it absorb into the filter. Then remove it from the bag and squeeze it with a paper towel to remove the excess oil.
To replace this filter no special tools are needed. Simply remove the cover and replace the filter element.
This is genuine Shindaiwa replacement part, it is sold individually. The air filter is placed in the Cleaner Body, then the Cleaner Cover is placed over it. The purpose of the Air Filter is to keep debris and contaminants from entering the carburetor and engine. You should inspect the filter from time to time, to make sure it is clean or if it is time to replace it.
This is a Genuine OEM Sourced replacement part used on Shindaiwa Trimmers/Brushcutters. This part is made out of Foam and it is Sold Individually. Its purpose is to filter out dust and debris from contaminating the carburetor and engine. When replacing the filter you can open the package in comes in and put a bit of two cycle oil in the bag and let it absorb into the filter. Then remove it from the bag and squeeze it with a paper towel to remove the excess oil. This will aid the filter in filtering out the unwanted debris.
To replace this Filter you will need a Screwdriver. Simply remove the Cover and replace the Air Filter.
This replacement part is an authentic OEM approved item commonly used on Shindaiwa power tools. It is designed to clean the air from dust and debris. This heavy duty air filter is made out of fabric material with a plastic holder/body. Please note foam filter is sold separately.
To complete this repair no tool would be needed.
• Remove knob that holds filter cover • Replace old filter with a new one • Secure cover and test the equipment
This replacement filter is specially designed for use with Shindaiwa trimmers and brushcutters. It is an authentic OEM sourced item, not an aftermarket imitation. The purpose of this filter is to prevent dust and other debris from contaminating the engine. Please note, this foam filter is sold individually.
Replacing this filter is a very simple task that will only require a screwdriver.
• Remove the cover screw • Remove cover and take out the old filter • Secure the new filter • Reassemble and test the unit
This foam pre-filter is a genuine OEM supplied item, not an aftermarket imitation. It is a high quality item designed for Shindaiwa lawn and garden equipment. Its purpose is to provide an extra level of filtration to remove the dust and debris from the air that goes into the engine. One foam pre-filter is included per order. Please note, the main filter is sold separately. Replacing this filter is a simple task that should not require any tools.
This is an authentic part from Shindaiwa for use in trimmers. The heavy duty air filter goes between the cleaner cover and the net and helps to keep dirt out of the engine. A wrench may be needed to replace this part. This air filter is sold as an individual replacement part and please note that the air filter-foam is sold separately.
This replacement air filter is a high quality item that is specially manufactured for Shindaiwa handheld lawn and garden equipment. Its purpose is to remove the dust and other contaminants from the air that goes into the engine. This sealed felt filter is sold individually, please note the foam pre-filter is sold separately. Replacing this air filter is a very simple task that does not require any tools.
This is a genuine OEM sourced item which is specially designed for use with Shindaiwa trimmers and brushcutters. The purpose of this filter is to ensure that the air that goes through the unit is free of dust and other harmful contaminants. Unfortunately, over time it will wear out and get clogged eventually requiring a replacement to ensure peak performance. Keep in mind this high-quality filter is made of durable foam material and is sold individually.
This is an authentic Shindaiwa replacement part manufactured for use with brush cutters. The air filter prevents damage to the engine by stopping dust from entering the air intake. Replacing the air filter is part of normal maintenance and can extend the life of the brush cutter. This air filter is sold as an individual replacement part.
This is a genuine OEM sourced replacement part that is specially made for use with Shindaiwa hedge trimmers. Its purpose is to ensure the air that goes into the unit is free of dust and other contaminants. Over time the material may get dirty and clogged restricting the airflow which can result in a loss of power, inspect the filter periodically and replace it as needed to maintain peak performance. It is made of high-quality foam material and it is sold individually, please note the main pleated filter is sold individually.
This genuine item is supplied directly from the original equipment manufacturer for use with trimmers, brushcutters, and lawn edgers made by Shindaiwa and Echo. The air filter base assembly goes next to the bracket and the air filter. It might require a socket set and an allen wrench to replace this part if it becomes broken. This part is priced individually and is made out of metal and plastic.
This air filter assembly is an OEM direct from Shindaiwa. This metal and plastic component is compatible with many lawn and garden tools. The air filter assembly is secured to the carburetor, capturing impurities. The air filter assembly is sold individually. A screwdriver and a hex key are helpful in making the repair. A cardboard composite gasket is also included.
This is an original replacement part manufactured for use with Shindaiwa outdoor power equipment. Air filters are vital to keeping an engine clean and to keep it running. This is the foam pre-filter that would fit over the main air filter. The pre-filter can wear out or rip, it is recommended to replace worn out filters. This pre-filter is sold individually.