Quick Fix: How to Replace the Outlet Connector on a Karcher Electric Pressure Washer

Use our Karcher parts finder to locate the pressure washer part for your next job.

  Replacing the connector

1. Remove the top and front cover

Use a screwdriver to remove the screws from the top and front cover.

With the screws removed you can remove the covers and set them aside.

2. Remove the metal fork

Use a pair of needle-nose pliers to pull the metal fork out of the outlet connector.

3. Pull the old connector off of the pump

Lift up the connector and pull it out of the unit.

4. Install the new connector

Transfer the o-ring from the old outlet connector to the new connector.

Then install the new connector onto the pump.

5. Replace the metal fork

With the new connector in place, you can reinstall the metal fork to secure it to the pump.

6. Replace the top and front cover

Place the covers back into their original position.

Then secure them using the screws that were removed in step 1.

 
[Back to Top]   Conclusion And that's how easy it is to replace the connector delivery outlet on your Karcher electric pressure washer. This repair can be done by anyone with a few basic tools and will save you money over the life of your tool.
Check out all of the pressure washer parts we offer on our website. 
[Back to Top] What We're About