Why Read This Article?
Finish Nailer Repair - Replacing the Driver Guide (Ridgid Part # 79004001022)
Article Breakdown
Finish Nailer Repair - Replacing the Driver Guide (Ridgid Part # 79004001022)
Tools & Materials
- Allen and Torx wrenches
Remember to use our DeWalt parts finder to find the right motor mount bracket for your saw.
Replacing the Motor Mount Bracket
1. Loosen the belt tensioning screw
Back the belt tensioning screw away from the metal pad. You do not need to remove it completely.
2. Remove the motor mount screws
Remove the six screws that secure the bracket. Then remove the bracket from the saw.
3. Install the new motor mount bracket
Set the new bracket in place. Look for the marks the old screws left and make sure you put the screws back in the same location to ensure proper belt tension.
4. Tighten the belt tensioning screw
Tighten the belt tensioning screw back down until it comes into contact with the metal pad.
[Back to Top]
Conclusion
And that's how you can replace the motor mount bracket on your DeWalt miter saw. This simple repair will help keep your motor running smoothly with the support it was designed to have.
Remember to use our power tool parts finder to find parts for all your other power tools.
[Back to Top]
What We're About