How to Replace the Air Filter Cover on a Poulan Chainsaw (Model P3314)

Chainsaw need a checkup? It's time to face the fix. Whether you are a legendary lumberjack or a weekend woodworker, eReplacementParts.com provides the parts, procedures and facts you need to fearlessly fix what fails you.

The primary purpose of the air filter cover is to secure and seal the air filter to the air filter base. The air filter cover also helps to efficiently route air into the engine for maximum performance. The air filter cover should be inspected each time the air filter is serviced.

The air filter cover can warp if the saw is overheated, or from years of exposure to fuel. When this occurs, the cover may no longer hold the air filter tight to the air filter base, which can allow dirt and debris into the engine. If the air filter cover is warped or missing, it should be immediately replaced to prevent serious engine damage.

This article provides step-by-step instructions for replacing the air filter cover on a Poulan chainsaw.

Let's get started.   REMOVING THE AIR FILTER COVER [top] 1. Remove the top cover.

Remove the (3) screws securing the top cover to the saw.

Lift the top cover away from the saw.

  2. Remove the air filter cover.

Remove the air filter cover from the air filter housing.

  INSTALLING THE NEW AIR FILTER COVER [top] 3. Install the air filter cover.

Install the new air filter cover.

  REASSEMBLING THE UNIT [top] 4. Reinstall the top cover.

Install the top cover onto the saw.

Secure the top cover with the (3) screws.

Do-it-yourself repairs like these are easier than you might think: From lawn machines to cordless drills, kitchen mixers to outdoor grills. Our "how-to" articles walk you through each repair from start to finish.

So, doing-it-yourself means never having to do it alone.

Find your next fix here.   [top]