866-322-9842
Mon-Fri 7am-1am EST
Sat-Sun 7am-11pm EST
Repair Parts Home  Bosch Parts  Bosch Demolition Hammer O Rings

Bosch Demolition Hammer O Rings

O-Ring
Part Number: 1610210122
In Stock, 10 available
O-rings are made to contain thousands of PSI pressure by creating a seal between two or more parts. O-ring measurements are defined by the inside diameter and the thickness.



Of the many causes for O-Ring failure, the most common among power tools are:

  • Extrusion and Nibbling – O-ring has ragged, tattered edges. These are commonly caused by pressure spikes which shear off tiny “bites” from the o-ring, or caused by clearance gaps.

  • Abrasion – One or both sides of the o-ring appear rough and slightly flattened. Commonly caused by a contact surface that it too rough, contains grit or is too smooth to allow lubrication.

  • Over Compression – O-ring is flattened on both sides and may have a “ring” split along its length. Commonly caused by excessive pressure or heat.

  • Heat Hardening – O-ring has a pitted or cracked surface, and often is flattened on both sides. Caused by temperature exceeding o-ring capacity.
  • Weather/Ozone Cracking – O-ring is covered in small surface cracks. Caused by exposure to ozone, UV rays and air pollution. Excessive seal stretching causes similar cracking.
  • O-Ring
    Part Number: 1610210033
    In Stock, 11 available
    An O-ring is a flexible ring used in between rigid parts, creating a pressure seal. This is an original OEM replacement part used in some Bosch demolition hammers. Since there are many sizes of O-ring used on these machines, be sure to use the right one in the right place. Sold individually.
    Seal Ring
    Part Number: 1610290065
    In Stock, 9 available
    This seal ring is an original part from Bosch. The flexible plastic ring is compatible with many rotary hammer tools, and is sold individually. The seal ring is fitted over the pin striker, securing it to the damping ring. You will a screwdriver and a pair of pliers for the replacement.
    O-Ring
    Part Number: 1900210156
    In Stock, 6 available
    60x4 MM
    O-Ring
    Part Number: 1610210144
    In Stock, 9 available
    This o-ring is an original part from Bosch. The rubber component is compatible with many drill devices, and is sold individually. The o-ring is fitted with other o-rings, between the striker pin and the cylinder roller. This item provides protection from friction. You will need a screwdriver and pliers for the installation.
    O-Ring
    Part Number: 1610210008
    In Stock, 9 available
    It is an authentic OEM supplied replacement part that is designed for use with Bosch rotary demolition hammers. This part provides a seal for the tool holder, please make sure to check appropriate diagrams for correct location and use of this o-ring. Over time the material may begin to deteriorate and crack eventually requiring replacement. Note this high-quality component is made of durable rubber and it is sold individually.
    Threaded Ring
    Part Number: 3613461500
    In Stock, 17 available
    O-Ring
    Part Number: 1610210153
    In Stock, 3 available
    This is an authentic OEM part. The Bosch o-ring is compatible with many demolition hammers, and is sold individually. The rubber o-ring is fitted onto the piston, providing protection from friction. This item is also included with the piston assembly (1617000836). A screwdriver and pliers are helpful for the replacement.
    O-Ring
    Part Number: 1610210091
    In Stock, 9 available
    24x4 MM
    O-Ring
    Part Number: 1900210166
    In Stock, 5 available
    This is an authentic manufacturer-sourced replacement part which is specially designed for use with Bosch demolition hammers. It is utilized to provide an air-tight seal between connected pieces, make sure to refer to the appropriate diagrams of your model for the correct location and application of this component, Keep in mind this high-quality part is made of durable rubber and is sold individually.
    O-Ring
    Part Number: 1610210210
    In Stock, 10 available
    O-Ring
    Part Number: 1610210127
    In Stock, 15 available
    O-Ring
    Part Number: 1610210041
    In Stock, 6 available
    O-rings are made to contain thousands of PSI pressure by creating a seal between two or more parts. O-ring measurements are specified by the inside diameter and the thickness.

    Of the many causes for O-Ring failure, the most common among power tools are:
  • Extrusion and Nibbling
  • O-ring has ragged, tattered edges. These are commonly caused by pressure spikes which shear off tiny “bites” from the o-ring, or caused by clearance gaps.
  • Abrasion
  • One or both sides of the o-ring appear rough and slightly flattened. Commonly caused by a contact surface that it too rough, contains grit or is too smooth to allow lubrication.
  • Over Compression
  • O-ring is flattened on both sides and may have a “ring” split along its length. Commonly caused by excessive pressure or heat.
  • Heat Hardening
  • O-ring has a pitted or cracked surface, and often is flattened on both sides. Caused by temperature exceeding o-ring capacity.
  • Weather/Ozone Cracking
  • O-ring is covered in small surface cracks. Caused by exposure to ozone, UV rays and air pollution. Excessive seal stretching causes similar cracking.
  • O-Ring
    Part Number: 1900210172
    In Stock, 5 available
    This is a genuine Bosch replacement part for demolition hammers. The O-ring is used to create a tight fit between the locking cover and the motor housing. This O-ring is made of high-quality material to ensure a tight seal. The item is sold individually.
    O-Ring
    Part Number: 1900210130
    In Stock, 12 available
    This is an authentic manufacturer sourced replacement part, it is specially produced for use with Bosch demolition hammers. It helps to provide an air tight seal between the armature bearing and the bearing end plate. Over time the material may deteriorate and crack eventually requiring replacement to maintain an air-tight seal. This o-ring is made from high-quality rubber material and it is sold individually.
    O-Ring
    Part Number: 1610210213
    In Stock, 12 available
    O-Ring
    Part Number: 1610210105
    In Stock, 14 available
    This is an authentic Bosch replacement part manufactured for use with rotary hammers. O-rings are commonly used to seal part assemblies, and to provide spacing between assemblies. O-rings can wear out from compression from pressure and may need to be replaced as part of maintaining the rotary hammer. This o-ring is sold as an individual replacement part.
    Intermediate Ring
    Part Number: 1600502023
    In Stock, 4 available
    This is a genuine Bosch replacement part produced by the manufacturer. The intermediate ring is composed of black plastic, and is compatible with a variety of tools and engines. Please refer to the specific manual and diagrams for specific repair instructions. This part is sold individually.
    O-Ring
    Part Number: 1610210203
    In Stock, 8 available
    O-Ring
    Part Number: 1610210123
    Ships in 5 - 11 business days
    Show More
    no image
    Part Number:
    visa mastercard discover american express PayPal
    HACKER SAFE certified sites prevent over 99.9% of hacker crime.

    fancyboxy