eReplacementParts.com
866-322-9842
Milwaukee Parts
Repair Parts Home  Milwaukee Parts  Milwaukee Grinder Nuts

Milwaukee Grinder Nuts

Flange Nut
Part Number: 49-05-0051
In Stock, 25+ available
This is a Genuine OEM replacement Flange Nut used on Milwaukee Grinders. This part secures the Grinding Disk to the unit. A Spanner Wrench (Sold Separately) is used to tighten and loosen this part. It is made out of Metal and it is Sold Individually.
1/4
Part Number: 48-68-0031
In Stock, 25+ available
This authentic replacement part is sourced directly from original equipment manufacturer. It is commonly used on Milwaukee grinders. The purpose of this collet nut is to secure a collet which holds bits. Common reasons for replacing this item would be rounded nut, stripped threads or if it is lost. Includes one (1) 1/4" collet nut per order. Please note you will need a wrench to install or remove this item.
1/4-20 Hex Nut
Part Number: 06-55-1525
In Stock, 15 available
This item is an authentic OEM approved replacement hex nut generally used on Milwaukee equipment. This nut is a piece of standard hardware which has different uses based on your equipment. Please check diagrams to ensure correct application of this item .Please note it is sold individually and you would need a properly sized wrench when installing/removing this nut.
Flange Nut
Part Number: 49-05-0110
In Stock, 5 available
This is a genuine OEM supplied replacement flange nut designed for use with Milwaukee sanders/grinders. This part is specially made to secure cutter/grinding wheel. Includes one (1) item per order. Please note you would need a spanner wrench (sold separately) when installing or removing this nut.
Spindle Lock Tube
Part Number: 42-42-0580
In Stock, 9 available
This item has been sourced from the original manufacturer to be used with angle grinders from Milwaukee. The durable plastic tube fits into the grinder's gearbox assembly. The spindle lock tube is used to secure the spring and the spindle lock shaft. The tube is sold as an individual replacement part.
Flange Nut
Part Number: 49-05-0050
In Stock, 16 available
This is a genuine OEM supplied replacement flange nut that is specially designed for use on Milwaukee sanders and grinders. Its purpose is to secure the grinding disk to the shaft. This durable metal flange nut is sold individually, please note the inner flange is sold separately.
M5 Hex Nut
Part Number: 05-55-0620
In Stock, 6 available
This genuine manufacturer sourced replacement hardware that is made for use with Milwaukee power tools. It is a standard hex nut that has multiple applications depending on the model of your tool, please make sure to check appropriate diagrams for correct location and use of this item. This nut is made from durable, high quality metal and it is sold individually.
10-24 Hex Nut
Part Number: 06-55-1050
In Stock, 13 available
This hex nut is specially designed to secure the clamshell pieces together. It is sourced directly from original equipment manufacturer for use with Milwaukee grinders, sanders and polishers. It is made from high quality metal and it is sold individually.
Disc Nut
Part Number: 49-40-0350
In Stock, 3 available
It is an authentic OEM sourced item which is specially produced for use with Milwaukee grinders and sanders. The disc nut attaches to the phenolic plate and is made out of metal. During the installation process, a set of pliers might be needed to replace this part. It may become broken and will need to be replaced. This is available as an individual replacement part.
5/8-11 Hex Nut
Part Number: 06-55-3250
In Stock, 1 available
5/16-18 Hex. Nut
Part Number: 06-55-1985
In Stock, 7 available
This is an authentic Milwaukee replacement part, sourced from the original manufacturer for use with power tools. The special nut is used with several types of equipment and the application of the nut can vary based on the model of the power tool. This hex nut is available as an individual replacement part, please see model diagram for part location and usage.
1/4 - 28 Locking Hex Nut
Part Number: 06-57-0500
In Stock, 2 available
This is an authentic OEM part from the Milwaukee manufacturer. The 1/4 - 28 locking hex nut is constructed of high-quality metal, and is compatible with many sander power tools. The locking hex nut secures the spiral bevel pinion in the upper gear case. This component is sold individually. A wrench is necessary for making the proper installation.
1/2-13 Hex Nut
Part Number: 06-55-2850
In Stock, 1 available
10-32 Hex Nut
Part Number: 06-55-3850
In Stock, 1 available
3/8-24 Hex Nut
Part Number: 06-55-2475
In Stock, 5 available
This is an authentic Milwaukee replacement part that is sourced from the original manufacturer to be used with drain cleaners, grinders, and electric chain hoists. The special hex nut is used with several different types of machines and the application of the nut can vary based on the model of the machine.
Fixtec Nut
Part Number: 05-59-0120
In Stock, 3 available
Hex Nut 3/8-16
Part Number: 06-55-2500
Ships in 8 - 14 business days
no image
Part Number: 06-59-1000
Ships in 8 - 14 business days
no image
Part Number: 06-55-3520
Ships in 8 - 14 business days
10-24 Hex Nut
Part Number: 06-55-1000
Ships in 8 - 14 business days
eReplacementParts.com
7036 South High Tech Dr.
Midvale, UT 84047
visa mastercard discover american express PayPal

fancyboxy