866-322-9842
Mon-Fri 7am-1am EST
Sat-Sun 7am-11pm EST
Repair Parts Home  Flex Parts  Flex Polisher Carbon Brushes

Flex Polisher Carbon Brushes

Carbon Brush
Part Number: 250816
In Stock, 25+ available
Genuine Manufacturer Sourced replacement part designed for use with certain Flex Power Tools. This part is made out of Carbon with a Lead Wire attached. This item includes One (1) Carbon Brush per order.

Carbon motor brushes are one of the most commonly replaced power tool components. Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement. Worn brushes are common causes of intermittent motor function, reduced electric braking, and reduced motor power. A worn out brush will often be worn down near the wire lead and may be cracked, pitted, or burned. When replacing carbon brushes, be sure to also inspect your armature for burns, cracks, or other damage which indicates a larger motor problem.
Brush
Part Number: 331880
In Stock, 25+ available
This replacement brush is a genuine OEM sourced item, not an aftermarket imitation. It is specially designed for Flex power tools. This item consists of (1) carbon brush with a lead wire attached. Please note, the brush holder and other parts are sold separately. It is recommended to replace both carbon brushes at the same time.

You will need a screwdriver to complete this repair job.
Carbon Brush (Sold Individually)
Part Number: 280291
In Stock, 25+ available
This is an authentic replacement part manufactured for use with grinders, polishers, and hole wet drills. The carbon brush is considered a wear item because it is pressed against the rotating armature in the motor and the brush will eventually wear out. Worn brushes can overload the motor and cause it to smoke or spark. Replacing brushes is a commonly power tool repair and this brush is sold individually.
Carbon Brush (Sold Individually)
Part Number: 211710
In Stock, 18 available
The carbon brush attaches to the motor housing. It is made of metal and plastic and is sold individually. This is a genuine OEM sourced part which is specially designed for use with Flex grinders, polishers, and drills. During the installation process, a screwdriver might be needed to replace this item. Over time this part may break and will need to be replaced.
Brush
Part Number: 285994
Ships in 13 - 19 business days
This is an authentic Flex replacement part, sourced from the original manufacturer for use with die grinders and polishers. Brushes are used to conduct a current between fixed wires and the rotating armature. Brushes can wear out over time and can cause intermittent use, banging sounds, require the tool to be jostled to work, or cause sparks or smoke. This brush is available as an individual replacement part, please note two brushes may be required.
Brush Holder
Part Number: 328146
In Stock, 9 available
Brush
Part Number: 264571
In Stock, 1 available
This replacement part is sourced directly from the original manufacturer for use with several sanders and polishers. This item is most often secured between the cap and brush tube assembly on each side of the service armature. The purpose of brushes is to conduct current in an electric motor that powers the tool. Please note it is advised to replace both brushes at the same time to ensure even wear. This part is sold individually. A screwdriver, hex key and needle nose pliers may be needed to make the proper removal and replacement.
Brush
Part Number: 332534
Ships in 13 - 19 business days
This is an original Flex replacement part manufactured for use with power tools. Brushes are considered wear items and will eventually need to be replaced. They are wear items because they brush against the armature to provide electricity that keeps the armature in motion. This brush is sold individually, please note two may be required.
Brush Holder
Part Number: 205931
In Stock, 4 available
Carbon Brush (Sold Individually)
Part Number: 280283
Ships in 13 - 19 business days
This a high-quality replacement is sourced directly from the original manufacturer for use with Flex variable speed polishers. The purpose of a brush is to conduct the current in an electric motor. Unfortunately, over time the material will wear out or the brush may get damaged which can cause intermittent performance. Sometimes, overly worn brushes will prevent the tool from running. When this happens, you will need to replace the brushes. One durable carbon brush with an attached lead wire is included. Note, it is advised to replace both brushes at the same time to ensure an even wear.
Brush Holder
Part Number: 182931
In Stock, 1 available
no image
Part Number: 358.022
Ships in 13 - 19 business days
no image
Part Number: 120030
Ships in 13 - 19 business days
Brush 230V
Part Number: 264563
In Stock, 1 available
Brush
Part Number: 294918
In Stock, 7 available
This is an authentic Flex replacement part that has been sourced from the original manufacturer to be used with angle grinders. The carbon brushes fit into the motor housing and are used to relay electricity to the rotating armature. This item is sold as an individual replacement part, please note two brushes may be needed.
visa mastercard discover american express PayPal
HACKER SAFE certified sites prevent over 99.9% of hacker crime.

fancyboxy