How to Replace the Wrench Holder on a DeWALT Chop Saw (Model D28715)

Saw chopping into your budget? It's time to face the fix. Whether you are a commercial contractor or a weekend welder, eReplacementParts.com provides the parts, procedures and facts you need to fearlessly fix what fails you.

The wrench holder is a rubber grommet that mounts to the base of the saw. The wrench is inserted into it and is held in place by friction. The holder might wear from regular use and fail to hold the wrench securely. Because it is rubber, it may harden over time and begin to crack. It can become so brittle that it eventually breaks off the saw.

This article provides step-by-step instructions for removing and installing the wrench holder grommet on a DeWALT chop saw (model D28715).

Let's talk chop.   REMOVING THE WRENCH HOLDER [top] 1. Unplug the saw.

Disconnect power to the saw.

      2. Remove the wrench holder.

Remove the wrench from the wrench holder grommet.

Use long-nosed pliers or a small screwdriver to pry the grommet out of the metal base.

Remove the wrench holder from the saw.

  INSTALLING THE NEW WRENCH HOLDER [top] 3. Install the wrench holder.

Lightly lubricate the outside of the new grommet with oil.

Partially install the new grommet into the base of the saw.

Use a small screwdriver to seat the grommet within the metal base.

  REASSEMBLING THE UNIT [top] 4. Reinstall the wrench.

Slide the wrench into the new wrench holder.

Do-it-yourself repairs like these are easier than you might think: From lawn machines to cordless drills, kitchen mixers to outdoor grills. Our "how-to" articles walk you through each repair from start to finish.

So, doing-it-yourself means never having to do it alone.

Find your next fix here.   [top]