eReplacementParts.com
877-346-4814
Makita Parts
Repair Parts Home  Makita Parts  Makita Drill Rings

Makita Drill Rings

Retaining Ring
Part Number: 961052-5
In Stock, 5 available
Genuine Makita replacement part, this item is sold individually.
This Retaining Ring is used in a number of Makita Tools as shown below.
Retaining rings are used in various parts of tools.
They are usually installed on a shaft to keep a bearing or a gear from moving.
They are also used in other applications depending on what tool you are working on.
This is an example of an external retaining ring.
Ring Spring 11
Part Number: 231951-8
2 Reviews
In Stock, 25+ available
Genuine Makita replacement part, this item is sold individually.
This part is used on the tools listed below, to contain all of the part that are attached to the front end of the tool.
Such as the Chuck assemblies on the the Impact Drivers and the Spindle Assemblies on the Screwdrivers.
Retaining Ring
Part Number: 961078-7
In Stock, 14 available
This is a genuine OEM authorized replacement part designed for use with Makita power tools. It has multiple applications based on your tool. This part is made out of metal and it is sold individually. To remove this part it is best to use retaining ring pliers (or snap ring pliers).
Ring Spring 7
Part Number: 231964-9
In Stock, 21 available
This ring spring is an authentic Makita replacement part. It is sold individually.
O Ring 14
Part Number: 213162-7
In Stock, 16 available
It is a genuine OEM sourced item that is specially manufactured for use with Makita power tools. An o-ring is generally used to create a tight seal between two connected parts. Please note this replacement item has multiple uses depending on the model of your tool, make sure to refer to appropriate diagrams for correct application of this o-ring. Over time the material may deteriorate and crack, inspect the seals and o-rings periodically, and replace them as needed to maintain peak performance. This high quality rubber o-ring is sold individually.
Retaining Ring S-8
Part Number: 961004-6
In Stock, 8 available
The retaining ring fits next to the helical gear. This is a genuine Makita part sourced directly from the manufacturer for use in saws. This part is priced individually and is made of metal. A screwdriver and a set of snap ring pliers might be required during the replacement of this part. It will require replacing if it becomes broken.
O Ring 67
Part Number: 213720-9
Ships in 7 - 12 business days
Stop Ring E-3
Part Number: 961017-7
In Stock, 5 available
This is an authentic manufacturer-sourced part which is specially desgined for use with Makita power tools. The stop ring is commonly generally utilized to secure a component to a shaft or a spindle, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality item is made of durable metal and is sold individually.
Rubber Ring 19
Part Number: 421494-0
In Stock, 7 available
This is an authentic Makita replacement part. The rubber ring is designed by the manufacturer for use in power tools such as jig saws, rotary hammers, and laminate trimmers. This part is placed in the armature and field assembly to help prevent unwanted vibration and to cushion the armature. You may require a screwdriver when replacing this part. It is advisable when removing multiple parts to keep careful track of their order so they can be reassembled correctly. This item is sold individually.
Stop Ring E-4
Part Number: 961011-9
In Stock, 3 available
This is an authentic Makita replacement part manufactured for use with power tools. The stop ring is commonly used to secure a part assembly to a shaft or spindle. The stop ring is a versatile part used with several different power tools. This stop ring is sold as an individual replacement part, please see model diagram for part location and usage.
Retaining Ring S-10
Part Number: 961006-2
In Stock, 2 available
O Ring 36
Part Number: 213510-0
In Stock, 19 available
It is a genuine manufacturer sourced replacement part that is designed for use with Makita power tools. This o-ring provides an air-tight seal between connected pieces, please make sure to refer to appropriate diagrams of your model for the correct location and use of this hardware. Over time the material tends to deteriorate and may crack eventually requiring a replacement. It is a high-quality item that is made of durable rubber and it is sold individually.
Retaining Ring S-6
Part Number: 961002-0
In Stock, 5 available
This is an authentic OEM part which is designed for Makita power tools. It is an identical replacement for a damaged or a faulty retaining ring that was installed on a new unit. Check the appropriate diagrams for your model for the exact location and the correct application of this retaining ring. You will need pliers toremove the old part and secure the new one. One durable metal retaining ring is included.
Retaining Ring R-32
Part Number: 962151-6
In Stock, 2 available
This is an authentic Makita replacement part sourced from the original manufacturer for use with power tools and outdoor power equipment. The retaining ring has multiple applications depending on the model of tool or equipment. The ring is commonly used to secure a bearing onto a spindle or shaft. This retaining ring is sold individually, please see model diagram for part location and usage.
Retaining Ring S-15
Part Number: 961055-9
In Stock, 1 available
This authentic retaining ring is supplied by the original equipment manufacturer for use with Makita power tools. It is an identical replacement for a damaged or a missing hardware that was installed on a new unit. Check the diagrams for your model to ensure the exact location and the correct application of this part. Keep in mind this high-quality retaining ring is made of durable metal and is sold individually. You will snap-ring pliers to secure or remove it.
O Ring 17
Part Number: 213265-7
In Stock, 5 available
This is an authentic replacement part that is sourced from the original manufacturer for use with Makita rotary hammers. The special o-ring is commonly used to seal the connection between the change lever and housing. This o-ring is available as an individual replacement part.
O Ring 22
Part Number: 213373-4
In Stock, 2 available
This is an authentic Makita replacement part manufactured for use with power tools and a brushless string trimmer. The o-ring is commonly used to form a seal at the front end of a motor assembly to prevent dust or debris from entering the motor housing. This o-ring is a versatile part, and the usage of the o-ring vary depending on the model of the tool. This o-ring is sold individually.
Speed Change Ring
Part Number: 419558-2
In Stock, 1 available
The speed change ring attaches to the gear. When replacing this part a screwdriver might be required during the installation process. It will require replacing if it becomes broken. This item is made of plastic and is available individually. It is a genuine replacement part sourced from the original manufacturer for use with Makita drills.
Stop Ring E-9
Part Number: 961015-1
In Stock, 5 available
This is an OEM part sourced directly from the manufacturer. The stop ring is commonly found in Makita drills, sanders, and planers. This part is made of metal, and is generally used to secure components on a shaft. It may be found in various locations in the machine, depending on model. Please refer to the parts diagram to be sure of ordering the correct part. You will require pliers when replacing this item. The stop ring is available as an individual replacement part.
Included in Part Number 183564-0
Retaining Ring S-14
Part Number: 961054-1
In Stock, 3 available
eReplacementParts.com
7036 South High Tech Dr.
Midvale, UT 84047
visa mastercard discover american express PayPal

fancyboxy