Easy
15-30 minutes
This cord protector is a genuine DeWalt replacement part and is sold individually.
Cord Protectors are designed to slide onto your cord and fit securely at the end, where it’s firm rubber will protect the base of the cord from getting bent and pinched, which can expose the wires and become a safety hazard.
Cord Protector N918736
OEM part for: DeWALT, Black and Decker, Porter Cable, Bostitch
Part Number: N918736
$4.99
In Stock
Order within the next 12 hours and your part ships today! 
Jump To:
Product Description ?
- Classification: Part
- Weight: 0.01 lbs.
- Also Known As: Strain Relief, Cord Guard, Cord Cover, Cord Grip
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This Cord Protector will fit the following 831 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Black and Decker
DeWALT
Porter Cable
Bostitch
Show More Compatible ModelsThis item works with the following types of products:
- Drill Parts
- Electric Drill Parts
- Hammer Drill Parts
- Screwdriver Parts
- Impact Wrench Parts
- Jig saw Parts
- Saw Parts
- Shear Parts
- Router Parts
- Jointer Parts
- Reciprocating Saw Parts
- Rotary Hammer Parts
- Sander Parts
- Polisher Parts
- Band Saw Parts
- Grinder Parts
- Chop Saw Parts
- Circular Saw Parts
- Nibbler Parts
- Plate Joiner Parts
- Impact Driver Parts
- Engine Parts
- Oscillating Tool Parts
This part replaces obsolete part #: N542553 (Npp), 90551470 (Npp), 330005-01 (Npp), 330005-01
Repair Videos ?
Watch the Repair Video for
Cord Protector
Articles:
|
Step-by-step instructions for quickly removing and installing the cord protector on a DeWALT D28402 grinder....
February 19, 2015
|
|
Step-by-step instructions for removing and installing the cord protector on your DeWALT shear....
April 02, 2018
|
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
7
4 stars
0
3 stars
1
2 stars
0
1 stars
0
< PREV
- 1
Perfect fit
My DeWalt grinders were not listed on the "fit" list so I called.. The lady was very helpful and she said the cord protectors would fit.. She was correct. A $6.00 part saved me $100 from buying another grinder. Great service.
Guest -
November 10, 2022
Verified Purchase
Great part and easy to repair.
Great customer service and communication.
Guest -
January 1, 2022
Verified Purchase
Cord Protector for Palm Sander
A perfect fit. Sander is like new again.
Guest -
September 28, 2021
Verified Purchase
As described
As described and functioned as designed
Guest -
November 19, 2019
Verified Purchase
Perfect fit correctly
Exactly what I was looking for
Guest -
October 22, 2019
Verified Purchase
As good as the original
Looks and feels the same as the one that came with the grinder.
Douglas -
August 15, 2019
Verified Purchase
Great service
FINE PART
Guest -
August 1, 2019
Verified Purchase
Great part
The shipping costs and times are killing me!!!
Gabe -
November 18, 2019
Verified Purchase
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Cord Protector
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Power cord cracked and somewhat brittle.
John - January 27, 2016
👍 2 of 2 people found this instruction helpful
Tool Type
Grinder
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Pliers, Power Drill, Wire strippers
Parts Used
Used ereplacement Video example for replacing a power cord on grinder.
It was very close to the actual grinder I owned and was very helpful.
It was very close to the actual grinder I owned and was very helpful.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Cord protector was broken
Ernie - June 22, 2018
👍 1 of 1 people found this instruction helpful
Tool Type
Electric Drill
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Parts Used
1. Removed the screws holding the handle together.
2. Disconnected power cord from switch.
3. Removed old cord protector, and slid new one on.
4. Connected power cord to switch.
5. Replaced screws in handle.
6. Tested drill to make sure all was working.
2. Disconnected power cord from switch.
3. Removed old cord protector, and slid new one on.
4. Connected power cord to switch.
5. Replaced screws in handle.
6. Tested drill to make sure all was working.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The power cord was bad and needed to be replaced
Richard - August 21, 2016
👍 1 of 1 people found this instruction helpful
Tool Type
Grinder
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Wire strippers, dikes and 2 crimp on wire ends
Parts Used
1. Split the case to the grinder.
2. Unplugged the existing power cord.
3. Purchase 2 crimp on plug ends and crimp them onto the new power cord.
4. Plug in the new power cord.
5. Screw the two case halves back together.
2. Unplugged the existing power cord.
3. Purchase 2 crimp on plug ends and crimp them onto the new power cord.
4. Plug in the new power cord.
5. Screw the two case halves back together.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The old cord protector was split and cracked
Thomas - December 23, 2015
👍 1 of 1 people found this instruction helpful
Tool Type
Electric Drill
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers, wire stripper
Parts Used
Open switch housing, remove power cord wiring from switch using a paper clip, remove ground wire from housing, remove old cord protector from power cord, replace with new, reinsert wires into switch, reattach ground screw to housing, reassemble switch housing, tighten all screws securely.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Cord was cracked
Michael - May 12, 2018
Tool Type
Router
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
1. Remove screws on top of router
2. Remove router top
3. Remove screws holding power cable
4. Remove cord protector and damaged cord
5. Replace with new parts and reverse installation.
2. Remove router top
3. Remove screws holding power cable
4. Remove cord protector and damaged cord
5. Replace with new parts and reverse installation.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Replace Cord and Cord Protector
Drew - February 28, 2018
Tool Type
Grinder
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Nutdriver
Parts Used
1. Remove outer case
2 Pull switch off and remove cord leads
3. Slide on cord protector and new cord into grinder, attach to switch
4. Reinstall Case screws
2 Pull switch off and remove cord leads
3. Slide on cord protector and new cord into grinder, attach to switch
4. Reinstall Case screws
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The power cord was cracking badly and was unsafe to use.
Bob - November 22, 2017
Tool Type
Electric Drill
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
I removed the screws holding the drill together, opened the case, removed the power cord easily, put the cord protector on the new cord and installed the new cord. After putting the case back on, I finally replaced the screws for the case and tested the drill.
All went well and the drill cord is now safer to use. The online research, order, and shipping were very easy. I'm pleased with the experience.
All went well and the drill cord is now safer to use. The online research, order, and shipping were very easy. I'm pleased with the experience.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Cracked cable.
Robert - November 12, 2017
Tool Type
Electric Drill
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Soldering iron
Parts Used
Disconnected the old one and connected the new cable.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Cord and Protector were cracked and needed to be replaced.
Rick - October 30, 2017
Tool Type
Polisher
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Soldering gun, Wire stripper
Removed 1/2 of the handle, removed the old cord and protector, installed heat shrink tubing, soldered in the new cord, shrunk the tubing with a lighter, installed and tightened the cord cover, job done.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Frayed cord and broken switch
Tim - September 13, 2017
Tool Type
Grinder
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, None
Removed rear of grinder replaced cord, switch and cord protector installed new housing.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Load More Install Stories
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
