Grid squares measure 1x1 inch

Watch The
Repair Video

Power Cord 330072-98

Part Number: 330072-98

68 Reviews

Order within the next 10 hours

and your part ships today!

Questions & Answers

Repair Instructions

*This part replaces obsolete part #: 325090-11 and N133089.

Product Information

Specifications

Length: 8'
Gauge: 18
Wires: 2
Type: Bare Wire

Description:

This cord is a genuine DeWalt replacement part. This cord is compatible with the list of models below. This part is made for double insulated tools It is a two wire cord with two prongs and does not need a ground wire. The cord is sold individually. Installation of this part requires the new cord wires to go correctly into wire terminals also routing the cord and wires in the right path can help avoid pinching when the tool case (Plate) is put back into place.

Warning: California's Proposition 65

Frequently Purchased With

Cord Protector..
$6.84

Terminal
$6.84

Carbon Brush
$6.84

Carbon Brush
$10.29

Carbon Brush
$6.84

Strain Relieve..
$8.50

Carbon Brush
$8.71

Hex Hole Flang..
$6.84

Compatibility

This part is compatible with the following machines:

Black and Decker

2601 Electric Drill

Porter Cable

3092 Type 1 Laminate Trimmer
3092 Type 2 Laminate Trimmer
557 Type 2 Plate Joiner Kit
557 Type 3 Plate Joiner Kit
330 Type 2 Finishing Sander
332 Type 1 Random Orbit Palm Sander
332 Type 2 Random Orbit Palm Sander
332 Type 3 Random Orbit Palm Sander
333 Type 1 Random Orbit Palm Sander
333 Type 2 Random Orbit Palm Sander
333 Type 3 Random Orbit Palm Sander

333 Type 4 Random Orbit Palm Sander
333 Type 5 Random Orbit Palm Sander
333VS Type 1 Random Orbit VS Palm Sander
333VS Type 2 Random Orbit VS Palm Sander
334 Type 1 Random Orbit Palm Sander
334 Type 2 Random Orbit Palm Sander
334 Type 3 Random Orbit Palm Sander
334 Type 4 Random Orbit Palm Sander
334 Type 5 Random Orbit Palm Sander
7430 4.5" Angle Grinder

DeWALT

Expand the 150+ compatible machines

Products Compatibility

This item works with the following types of products:

• Drill
• Electric Drill
• Grinder
• Hammer Drill
• Jig saw
• Jointer
• Laminate Trimmer
• Plate Joiner
• Reciprocating Saw
• Router
• Sander
• Saw
• Screwdriver
• Shear

Expand List

Questions & Answers for Power Cord

Sort by

Where do I get this replacement power cord for my jumpstart

william for model number PPRH5B asked on 2023-03-28

Hello William, Thank you for your inquiry. This part number is available on our website and if you need help placing an order, please do not hesitate to give us a call. We look forward to hearing from you.

Did this question help you?

Repair Instructions: Submitted by Customers Like You

19 of 23 people found this instruction helpful

Tool Type:

Electric Drill

Parts Used:

Power Cord - 330072-98

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver, wire stripper

Frayed cord

Remove one half of the housing. Disconnect the cord wires from the switch, slide the cord protector off of the old cord and slide it onto the new cord. Connect the new cord wires to the switch and assemble the housing..

Did you find this story helpful?

Thanks for voting and helping fellow customers!

7 of 8 people found this instruction helpful

Tool Type:

Sander

Parts Used:

Power Cord - 330072-98

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver

Cracked cord

Remove the screws that hold the top cap on. Remove cap. Note where the cord leads are. Remove the cord leads from the tool. Slide off cord relief and place on the new cord. Trim the coed leads to the correct length. Attach the new cord leads. assemble sander.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

3 of 4 people found this instruction helpful

Tool Type:

Grinder

Parts Used:

Power Cord - 330072-98

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, Wire strippers, crimper

Power cord was cut

1. Remove housing on the grinder.
2. Remove existing wire connectors and power cord.
3. Install new connectors to new power cord. Cut wires on new cord to correct length.
4. Expose about 3/8" in. of copper on each wire and crimp on new connectors.
5. Install new power cord.
6. Replace housing.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

2 of 2 people found this instruction helpful

Tool Type:

Grinder

Parts Used:

Power Cord - 330072-98

Rocker Switch - 5140103-67

Repair Difficulty:

Medium

Time Spent Repairing:

30-60 minutes

Tools Used:

Screwdriver

Tool shut off when using.

Removed one half of the housing. Removed the cord connections from the switch. Then removed the switch. Take a picture so you can see where all the parts inside are located. You will need to trim the cord wires to the correct length. And i should have ordered the cord terminals. Place the cord protector on the new cord and wire the cord to the new switch. Then assembly in reverse order.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

2 of 3 people found this instruction helpful

Tool Type:

Reciprocating Saw

Parts Used:

Power Cord - 330072-98

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver

Power cord was cut

Took off the side cover, which exposes the power cord and trigger assembly . Then switch out cord and route the cord. Very easy to do.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

1 of 1 people found this instruction helpful

Tool Type:

Electric Drill

Parts Used:

Power Cord - 330072-98

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver, Wire stripper

Power cord was cracked and disintegrating exposing wires

1. Took 7 screws to release the case
2. Pressed the wire release on the trigger assembly releasing the wires
3. Removed the old cord
4. Stripped 1/2" off new power cord 2 wires
5. Twisted the stranded wire and inserted back into assembly by pressing the release
6. Rerouted the rest of the cord into proper position just as the old one was
7. Snapped the case back together
8. Screwed the case back together with 7 screws.
9. Done

Did you find this story helpful?

Thanks for voting and helping fellow customers!

1 of 1 people found this instruction helpful

Tool Type:

Grinder

Parts Used:

Power Cord - 330072-98

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, Pliers

Bad power cord

Took a part grinder to cut wires to the connector. Pride open crimped connector to disconnect the wiring. Place new wire in then crimped and wrapped electrical tape. Slide the connector in place and assembled grinder. Nice new and longer cord, works and runs prefect.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

1 of 1 people found this instruction helpful

Tool Type:

Electric Drill

Parts Used:

Power Cord - 330072-98

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, Pliers, Soldering gun

Bad/damaged power cord

1) Remove drill housing
2) Remove old cord
3) Reuse rubber cord protection and insert in base of drill handle once applied to new cord
4) Solder new cord, braided wire ends, to stiffen them. (this is necessary to insert the wire into the trigger assembly)
5) Close and secure drill housing

Did you find this story helpful?

Thanks for voting and helping fellow customers!

1 of 1 people found this instruction helpful

Tool Type:

Electric Drill

Parts Used:

Power Cord - 330072-98

Repair Difficulty:

Medium

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver, Power Drill

Cord on electric drill was damaged

Opened up the drill, replaced the cord put the drill back together

Did you find this story helpful?

Thanks for voting and helping fellow customers!

1 of 1 people found this instruction helpful

Tool Type:

Sander

Parts Used:

Power Cord - 330072-98

Repair Difficulty:

Medium

Time Spent Repairing:

15-30 minutes

Tools Used:

, Torques, soldering iron

UV cracked cord.

1. Removed the top of the sander.
2. Removed the old power cord.
3. Removed the connectors from the old power cord.
4. Soldered the old connectors to the new cord.
5. Installed the new cord.
6. Replaced the clamp.
7. Replaced the top of the sander.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Reviews

Average Rating (out of 5):

68 Reviews

Click to filter by ratings:

5 stars

4 stars

3 stars

2 stars

1 stars

Sort by:

Highest Rating
Most Recent

< PREV

NEXT >

Just what I needed

This item arrived very quickly so I was able to get my drill back into service. It is also very durable in it's appearance.

Lee - September 28, 2023 Verified Purchase

Power cord

This was one of the best repairs yet. Very simple with the right parts! Thanks

John - September 12, 2023 Verified Purchase

Perfect - Parts

Exactly what I needed. The website parts and diagram with part number list, perfect!

David - September 2, 2023 Verified Purchase

Cord replacement on Dewalt grinders.

Appreciate the quick response time.

Guest - August 23, 2023 Verified Purchase

Exact replacement part

My much used 4 1/2 inch DeWalt grinders needed new service cords. eReplacement parts had the exact cords at a great price and quickly available. Thanks again for super service.

Steven - July 17, 2023 Verified Purchase

Perfect fit and quality parts

It’s just a power cord but it’s exactly what is needed as a replacement part. I’ve purchased mans parts from Ereplacement parts and I’m very happy with the availability plus fast shipping of parts I need to repair my equipment. Don’t throw away your worn out tools, repair them and save money.

Robert - June 3, 2023 Verified Purchase