Easy
15-30 minutes
Genuine Black and Decker replacement part, this item is sold individually.
This Terminal is attached to the cord on all of the tools listed below.
It is then attach to the electrical connection of the tool.
Terminal 464228-00
OEM part for: DeWALT
Part Number: 464228-00
$4.99
Factory Backorder
Date Available: Unknown 
Jump To:
Product Description ?
- Classification: Part
- Weight: 0.01 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This Terminal will fit the following 90 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Displaying 20 of 90 matching models.
DeWALT
Show More Compatible Models90 total model matches. Try the above search to narrow your results.
This is the official OEM part for the following brands:
- Black and Decker
- DeWALT
This item works with the following types of products:
- Grinder
- Jointer
- Nibbler
- Plate Joiner
- Polisher
- Router
- Sander
- Shear
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
5
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Exactly what I needed
Promptly shipped
Guest -
August 23, 2021
Verified Purchase
Parts as described
Easy to find part on website. Fast service and fast delivery.
Guest -
January 11, 2020
Verified Purchase
Exactly the part needed
The correct part delivered on time
Guest -
November 30, 2019
Verified Purchase
Needed these.
This was the exact replacement I needed when replacing the power cable on my angle grinder.
Guest -
September 16, 2019
Verified Purchase
Worked as expected
well made, as original part, easy install
Guest -
July 12, 2019
Verified Purchase
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Terminal
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Replaced power cord on two grinders
Micheal - December 26, 2015
👍 1 of 1 people found this instruction helpful
Tool Type
Grinder
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers, multi plier
Open tool housing. Remove old cord ends from tool. Put cord protector on new cord, measure new wires for length against old wires. Cut to length and strip insulation. Crimp terminal ends on wire. Reconnect terminals to correct polarity tool connectors. Position wires in housing and reassemble. Test run tool for proper operation.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The cord was wore out very bad!!!!!
Troy - July 9, 2023
Tool Type
Grinder
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, Torx bits
Parts Used
New cord
Did you find this story helpful?
Thanks for voting and helping fellow customers!
power cord
Gary - November 7, 2020
Tool Type
Grinder
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers, crimper
Parts Used
removed old cord, put new terminals on new core, installed new cord.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Damaged cord
donakd - September 28, 2017
Tool Type
Grinder
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Pliers
Parts Used
Removed the screws from the rear housing
Removed the old cord from the switch
Removed the cord relief from the old cord and slid it on the new cord
Cut the cord leads to the correct length and put on the terminals
Connected the new cord to the switch
Replaced the rear housing
Removed the old cord from the switch
Removed the cord relief from the old cord and slid it on the new cord
Cut the cord leads to the correct length and put on the terminals
Connected the new cord to the switch
Replaced the rear housing
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Electrical cord resembeled spaghetti
William - August 10, 2017
Tool Type
Grinder
Difficulty
Easy
Time
15-30 minutes
Tools Used
, Allen wrench,wire stripper
Parts Used
Remove the back cover of the grinder, note how the other parts are placed. Remove the cord wires from the switch. Place the old cord protector on the new cord. Strip the wires and attach the terminals. Connect the new terminals to the switch. Make sure the rest of the parts are in place, then attach the back cover.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
One of the wires in the power cord broke.
Doug - May 8, 2017
Tool Type
Grinder
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Soldering Iron
Removed the handle cover
Pulled the terminal connectors.
Slid the power cord through the protector.
Soldered the terminals onto the new power cord wires.
Plugged in the terminals.
Aligned the power cord protector and replaced the cover.
Pulled the terminal connectors.
Slid the power cord through the protector.
Soldered the terminals onto the new power cord wires.
Plugged in the terminals.
Aligned the power cord protector and replaced the cover.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Learn MoreOur product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
