Why Read This Article?
Finish Nailer Repair - Replacing the Driver Guide (Ridgid Part # 79004001022)
Article Breakdown
Finish Nailer Repair - Replacing the Driver Guide (Ridgid Part # 79004001022)
Tools & Materials
The bump cap attaches to the trimmer head hub and holds the spool in place. The cap attaches to the hub with two plastic locking tabs. Eventually, these locking tabs might fail, and the cap will no longer hold the spool in place.
Let's get started.
REMOVING THE BUMP CAP 1. Remove the bump cap.
a. Depress the two locking tabs on the sides of the bump cap.
b. Remove the bump cap from the trimmer head.
INSTALLING THE NEW BUMP CAP
2. Install the bump cap.
a. Position the new bump cap over the spool.
b. Align the locking tabs on the bump cap with the slots on the hub.
c. Press firmly on the bump cap to engage the locking tabs.