Why Read This Article?

Finish Nailer Repair - Replacing the Driver Guide (Ridgid Part # 79004001022)

Article Breakdown

Finish Nailer Repair - Replacing the Driver Guide (Ridgid Part # 79004001022)

Video

Tools & Materials

Tools Required: None required

How to Replace the Controller on a Char-Broil Electric Grill

Find Official Char-Broil Electric Grill Parts that Fit

Finish Nailer Repair - Replacing the Driver Guide (Ridgid Part # 79004001022)

If your electric grill will no longer heat up, you likely need a new controller. The controller allows you to turn the grill on and set the desired temperature. After years of use, the controller can fail; either not turn on, or not holding the correct temperature.

Let's get started.

REMOVING THE CONTROLLER 1. Remove the controller.

a. Grasp and pull the controller assembly away from the grill body.

INSTALLING THE NEW CONTROLLER

2. Install the controller.

a. Align the new controller with the prongs on the heating element.

b. Slide the controller firmly toward the heating element to engage the prongs and seat the controller.

SHOP FOR CHAR-BROIL ELECTRIC GRILL PARTS

Need Char-Broil electric drill parts? We'd love to help you find the one you need.

Shop our wide selection of Char-Broil Electric Grill Parts straight from the manufacturer and we will have the right fit to you in no time.