This genuine OEM part that is commonly utilized on a variety of lawn and garden equipment. It is an important component which provides a tight seal between connected parts. If the washer is worn, damaged or missing, this will provide an identical replacement for the original part that was installed on a new unit. To ensure the exact location and the correct repair procedure, check the diagrams for your model. Note, this high-quality washer is made of durable material and is sold individually.
Washer, 13/32 X 1 X 1/2.11guar 596135501
OEM part for: Poulan, Ryobi, Husqvarna, Weed Eater, Craftsman, Jonsered
Part Number: 596135501
Jump To:
Frequently Purchased Together ?
Compatibility
This part will fit the following 3059 machines
Poulan
Ryobi
Husqvarna
Weed Eater
Craftsman
Jonsered
This item works with the following types of products:
- Lawn Tractor Parts
- Lawn Mower Parts
- Trimmer Parts
This part replaces obsolete part #: 532413524, 819133210, 413524, 8191332-10, 19133210
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Washer, 13/32 X 1 X 1/2.11guar
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Needed to replace bolt that was going striped underneath chassis holding a pulley wheel. Had to loosened up chassis from frame and lift up to pull old one and replace with new one and reverse putting
Tool Type
Lawn Tractor
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Pliers, Socket set, Wrench Set
Bearings in my Pulley Idler froze up and caused the pulley to break the bolt in half and fall off the mower deck.
Tool Type
Lawn Tractor
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Socket set
Stationary idler pulley bearing failed (melted) and mower deck drive belt came off.
Tool Type
Lawn Mower
Difficulty
Hard
Time
More than 2 hours
Tools Used
Screwdriver, Pliers, Socket set, Wrench Set, Adjustable Wrench
Parts Used
- Washer, 13/32 X 1 X 1/2.11guar - 596135501
- Bolt - 596136301
- Flat Idler Pulley - 532194327
- V-groove Idler Pulley - 532194326
- Spacer Retainer - 532194321
- Belt Drive Deck - 593773401
- Washer Hardened - 532178515
- Pulley Idler - 532196106
- Hex Flange Locknut - 532409149
- Bolt - 596435101
- Bolt 3/8-16 X 1-1/2 Gr. 5 - 596136101
- Pulley - 532177968
- Stationary Idler Pulley - 532196104
2. Removed and replaced tractor mounted idler pulleys, since bearings were noisy.
3. Disassembled mower deck - opted to overhaul blade tower supports (3) to clean and renew lubrication. RECOMMEND REPLACING THESE PARTS AS A UNIT, instead of overhaul.
4. Bearing failure had caused hole in deck-mounted pivot support bracket for belt tensioner to become elongated - opted to do nothing at this time.
5. Replacement pulley on pivot support was not sized to accept 7/16" dia bolt!!! Hardened spacer washer hole was too small as well. Re purposed another bolt from the ordered parts, and added washers as necessary to allow pulley to track properly without binding against the tensioner arm.
6. Removed and replaced other pulleys and hardware (these replacement parts were identical to the removed ones).
7. Installed new belt as per diagram on belt slip cover.
8. Reinstalled mower deck underneath the lawn tractor.
Works great!
Maintenance was due as we are starting the mow season and this unit has been in use for several years.
Tool Type
Lawn Tractor
Difficulty
Medium
Time
More than 2 hours
Tools Used
Pliers, Socket set, Wrench Set, Adjustable Wrench
Parts Used
- Washer, 13/32 X 1 X 1/2.11guar - 596135501
- Push Nut - 532110452
- Spacer Retainer - 532194321
- Bellcrank Ground Drive - 531169001
- Bracket Clutch Anti-rotation - 532195804
- Sleeve Cap - 532105304
- Deflector Rod - 595297001
- Strap Battery Mount - 532190270
- Spring, Torsion - 539107609
- Spring Drive - 532196105
- Spring - 532105709
2. Removed drive pulleys and idler pulleys replaced with new pulleys.
3. Installed new bell crank drive, springs, clutch anti rotation bracket.
4. Installed mower deck and deck drive belt.
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.