Deflector Rod

Bracket Deflector Mower 42 - 529845901

Spring - 532123713

Repair Difficulty:

Easy

Time Spent Repairing:

30-60 minutes

Tools Used:

Socket set

Replace deflector shield

Remove what was left of the old shield and replace with the new one

Did you find this story helpful?

Thanks for voting and helping fellow customers!

1 of 1 people found this instruction helpful

Tool Type:

Lawn Tractor

Parts Used:

Spring - 532123713

Shield Defl Ector - 532130968

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Socket set

Missing deflection shield on deck

Easy as 123... Installed deflection shield pin and spring through shield and bracket. Then bolted assembly back on the mower deck. Two bolts with lock nuts and I was back in business! Thanks for the parts! Had them in two days time and back to mowing!!! Thanks again!

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Lawn Tractor

Parts Used:

Spring - 532123713

Shield Defl Ector - 532130968

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

, Hammer

Deflector Shield Assembly fell off

Aligned shield and spring.
Placed Rod.
Attached push nut (acquired separately). Tapped nut with hammer to secure.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Lawn Tractor

Parts Used:

Carriage Bolt - 596136401

Brkt, Deflector, 38 - 532192557

Nut Lock - 596040501

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Socket set, Wrench Set, Bolt cutter, ball peen hammer, punch, adjust. locking pliers

Existing Grass/debris deflector needed replacing

1. Rather than removing the locking nut, to save time used bolt cutter to cut the mounting rod.
2. Used a small ball peen hammer and small punch to knock out the rod.
3. Thoroughly cleaned the area on the mower deck where the mounting rod is installed.
4. Used the existing spring, after cleaning it, that mounts with the rod.
5. Used the locking pliers to retain the spring in place of the deflector.
6. Lined the deflector up on the permanent mounting brackets on the mower deck and
installed the new mounting rod.
7. Used the locking pliers and a 3/8” socket and the ball peen hammer to apply the new lock
nut.
This completed the task.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Lawn Tractor

Parts Used:

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Pliers, Socket set, Wrench Set

Part were missing and had to be replaced

Installed the bracket, spring and rod on shoot and install shoot on mower.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Lawn Tractor

Parts Used:

Repair Difficulty:

Hard

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, hammer

There were no instructions as how to insert the spring-torsion-deflector

inserted the deflector rod, and pushed the push-nut on with a screw driver and a hammer.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Lawn Tractor

Parts Used:

Shield, Deflector - 532192572

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Socket set

Replaced chute deflector

Removed the 2 nuts that holds the chute deflector and replaced new deflector in stall rod and spring and used the washer at end of rod install nuts on deflector bracket and tighten

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Lawn Tractor

Parts Used:

Brkt, Deflector, 38 - 532192557

Sleeve Cap - 532105304

Shield-Deflector - 532403004

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Socket set

Shield Deflector was broken. Ordered all the new parts to mount it. Very easy and all the parts fit perfect.

Assembled the deflector parts to the deflector, unscrewed the two nuts and bolts that held it on, and assembled. Simple when you have the correct parts. Thank You e-replacement.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Lawn Mower

Parts Used:

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Socket set, Wrench Set

Nothing....exactly what I needed...perfect fit...

Installed new discharge chute with torsion spring and rod...easy replacement for anyone with a little mechanical ability.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Lawn Tractor

Parts Used: