Watch The
Repair Video

Filter-Air Cleaner Cartridge

Part Number: 396424S

4 Reviews

Ships within 1 business day

Questions & Answers

Repair Instructions

*This part replaces obsolete part #: 30-094 and 396424.

Product Information

Specifications

Part Type: Air Filter

Description:

This is an authentic manufacturer approved replacement part designed for use with Briggs and Stratton engines commonly installed on Toro lawn and garden equipment. Its purpose is to filter out dust and debris from contaminating the carburetor. This filter is made from high quality pleated paper in a plastic housing and it is sold individually.

Warning: California's Proposition 65

Frequently Purchased With

Air Cleaner El..
$5.49

Compatibility

This part is compatible with the following machines:

Briggs and Stratton

Toro

Expand the 150+ compatible machines

Questions & Answers

Sort by

could you tell me the exact dimensions of this air filter, part number 396424S Thank you

Michael for model number 132232 2136 01 asked on 2023-02-18

Hi Michael, Thank you for your question. The filter is approximately 3 inches high with a diameter of approximately 3-1/4 inches. If you would like to place an order for it, please call our customer service line and anyone will be happy to assist you. We look forward to hearing from you!

Did this question help you?

Repair Instructions: Submitted by Customers Like You

1 of 1 people found this instruction helpful

Tool Type:

Engine

Parts Used:

Filter-Air Cleaner Cartridge - 396424S

Air Filter - 35066

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Pliers

Air filters needed to be changed as a regular maintence

Just changed filters on both engines, only one required a pair of pliers

Did you find this story helpful?

Thanks for voting and helping fellow customers!

1 of 1 people found this instruction helpful

Tool Type:

Engine

Parts Used:

Air Cleaner Element - 271466

Cylinder Head Gasket - 272157S

Filter-Air Cleaner Cartridge - 396424S

Spark Plug - 796112S

Repair Difficulty:

Medium

Time Spent Repairing:

30-60 minutes

Tools Used:

Socket set, Wrench Set, Torque Wrench

Blown head gasket on 5 hp walk behind blower

Had to figure out the torque spec on a Briggs 5 hp, horizontal shaft engine but did a little internet searching and found it.

Remove the existing motor head carefully to ensure that the bolts were tracked for reassembly and not lost. Scrapped the existing gasket material from the head and the motor housing. Took a little time to wire wheel carbon from the piston and valves. Put the new gasket on the head and reassembled. Torqued it down to what I believe is the proper spec.

Changed the spark plug and air filter.

Started on the second pull.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Engine

Parts Used:

Air Cleaner Element - 271466

Fuel Tank Mounting Gasket - 272409S

Filter-Air Cleaner Cartridge - 396424S

Repair Difficulty:

Medium

Time Spent Repairing:

1-2 hours

Tools Used:

Screwdriver, Pliers, Socket set, Wrench Set, Gasket scraper

tiller would not stay running

Pick up tube fell off bottom of carburetor into the fuel tank. Removed fuel tank, secured the original pick up tube and reinstalled fuel tank. Not as easy as it sounds considering I did not remove carburetor because the mounting bolts were stripped. Tiller is 20years old.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Engine

Parts Used:

Rewind Starter Spring - 490179

Intake Gasket - 273113S

Carburetor Overhaul Kit - 495606

Carburetor Diaphragm - 272538S

Fuel Pick-Up Tube - 391813

Air Cleaner Element - 271466

Intake Gasket - 27355S

Screw - 94025

Fuel Tank Mounting Gasket - 272409S

Filter-Air Cleaner Cartridge - 396424S

Repair Difficulty:

Medium

Time Spent Repairing:

More than 2 hours

Tools Used:

Screwdriver, Power Drill, Socket set, Wrench Set, Scaler, welder, die grinder with a cutoff wheel, hammer

Chipper was left with ethanol fuel and rotted the bottom of the fuel tank out and left the carb full of yellow “sand”. The rewind spring was broken, the engine would not turn over, as it turned ou

Removed the fuel tank and carb cleaned the carb and installed the rebuild kit. I cut the damaged metal out of the fuel tank, cleaned the rust out of the rest of the tank with a needle scaler and welded a new bottom onto the tank. Next I pulled the blower housing off and replaced the rewind spring. After that I pulled the housing off the chipper, took the flails apart and freed them up, cleaned the mouse nest out, gave everything a coat of paint.
Now I have a good chipper that starts on the second pull that I saved from going to the dump for very little money.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Engine

Parts Used:

Carburetor Diaphragm - 270026

Filter-Air Cleaner Cartridge - 396424S

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, Socket set

Diaphragm.

Parts fit just right.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Engine

Parts Used:

Breather Tube Grommet - 692189

Air Cleaner Element - 271466

Filter-Air Cleaner Cartridge - 396424S

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Air filter cartridge dirty, air cleaner element and breather tube grommet missing

Replaced air cleaner cartridge
Installed air cleaner element
Installed breather tube grommet

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Engine

Parts Used:

Filter-Air Cleaner Cartridge - 396424S

Spark Plug - 796112S

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Socket set

Air filter and spark plug required replacement

Removed air cleaner housing, installed new filter
Removed old spark plug, checked gap on new plug and installed

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Engine

Parts Used:

Air Cleaner Element - 271466

Stud- Air Cleaner - 231176

Base-Air Cleaner - 691735

Filter-Air Cleaner Cartridge - 396424S

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Pliers, Power Drill, Socket set, Wrench Set, drill bit & easout

Routine maintenances and broken air cleaner Stud

Pulled carb. So as not to get metal shavings in engine, when drilling out broken stud. Use easy out to remove broken air cleaner stud. Replace carb. install new parts. Simple

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Reviews

Average Rating (out of 5):

4 Reviews

Click to filter by ratings:

5 stars

4 stars

3 stars

2 stars

1 stars

Sort by:

Highest Rating
Most Recent

< PREV

NEXT >

Air filter cartridge

Arrived quickly, perfect fit for Briggs & Stratton 5hp motor

Ron - June 27, 2020 Verified Purchase

Fit right

The part was an exact replacement. Works great

Guest - November 5, 2019 Verified Purchase

good quality part

this item was ordered for a wood splitter which gets a large amount of dust and wood chips it works well

Guest - July 23, 2019 Verified Purchase

all good

all parts were as ordered

Guest - July 6, 2021 Verified Purchase

Verified Purchase

eReplacementParts Team

Sort by:

Highest Rating
Most Recent

< PREV

NEXT >

Product Information