Watch The
Repair Video

Exhaust Gasket

Part Number: 692236

8 Reviews

Order within the next 12 hours

and your part ships today!

Questions & Answers

Repair Instructions

*This part replaces obsolete part #: 272293 (Included in Gasket Set-Part No. 393411), 165291, BS-692236, 532272293, 125593X, 091309, 2949R, 91309, 91309MA, MU692236, 272293, 270917 and 091309MA.

Product Information

Description:

This is a Genuine OEM replacement part used on a variety of Lawn and Garden Engines. This item is made with Composite Material and it is sold individually. Its purpose is to make an air tight seal between carburetor and Exhaust Tube so that no air leakage occurs. Over time this gasket will deteriorate and will need to be replaced.

To replace this Gasket you will need a Screwdriver.

Warning: California's Proposition 65

Frequently Purchased With

Rocker Cover G..
$6.33

Cylinder Head ..
$20.69

Gasket--Intake..
$3.18

Seal--O Ring (..
$5.73

Screw
$11.27

Muffler
$74.28

Bolt, Muffler..
$7.03

Gasket--Breath..
$7.29

Compatibility

This part is compatible with the following machines:

Murray

Briggs and Stratton

040243-0 Generator
040243-1 Generator
040248-0 Generator
040298-0 Generator
1897-0 Generator

01975-0 Generator
040220-0 Generator
040220A-0 Generator
040221-0 Generator
8799-1 Portable Generator

Expand the 150+ compatible machines

Questions & Answers

Sort by

No questions have been asked yet

Repair Instructions: Submitted by Customers Like You

Tool Type:

Lawn Tractor

Parts Used:

Exhaust Gasket - 692236

Screw Lock - 92378MA

Repair Difficulty:

Easy

Time Spent Repairing:

30-60 minutes

Tools Used:

Screwdriver, Socket set

Muffler was loose & louder without a gasket. Could never get it tight until now with the help of this lock set. If the lock set didn’t work I was going to use red permanent lock tight.

Installed gasket & lock set. It stays in place and quieter with gasket

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Lawn Tractor

Parts Used:

Hex Screw - 596134201

Muffler - 532188655

Exhaust Gasket - 692236

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Socket set

Muffler broke.

Removed 2 Bolts holding the old muffler.
Replaced with new muffler

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Lawn Tractor

Parts Used:

Gasket--Intake - 692137

Seal--O Ring (Intake Manifold) - 692138

Exhaust Gasket - 692236

Kit-Carburetor Overhaul - 497535

Repair Difficulty:

Easy

Time Spent Repairing:

More than 2 hours

Tools Used:

Screwdriver, Pliers, Socket set, Wrench Set

Gas was getting into the oil.

Gas was getting into the oil. Did total carb rebuild, added gas shut-off valve, pulled head and cleaned the head. Adjusted valves, and replaced bad starter. Started right up. I have the manuals for doing the work. I also made copies of the diagrams off of the internet. Good idea for some people is to take pictures from start to finish so you do not miss anything.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Lawn Mower

Parts Used:

Hex Screw - 596134201

Exhaust Gasket - 692236

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

, Allen wrench

Exhaust bolt fell out- blew out exhaust tinplated gasket. Mower wouldn’t start as a result.

1. Removed the remaining socket (Allen wrench bolt)
2. Replaced the blown out gasket
3. Painstakingly aligned the gasket and bolt holes
4. Utilized an Allen wrench to install the exhaust manifold socket (Allen wrench) bolts.
5. Wouldn’t start???
6. A few squirts of starter fluid and new spark plug and we are running like new!

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Lawn Tractor

Parts Used:

Cylinder Head Gasket - 273280S

Exhaust Gasket - 692236

Ring Set - 792306

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Socket set, Nutdriver

blowing blue smoke

replaced rings , no more smoke yeah.!!!!!!!!!!!!!!!!!!

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Lawn Tractor

Parts Used:

Exhaust Gasket - 692236

Cylinder Head Gasket - 271866S

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Socket set, Wrench Set

would not start

Removed the head repalace the head gasket

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Lawn Tractor

Parts Used:

Exhaust Gasket - 692236

Gasket-Intake - 796081

Cylinder Head Gasket - 796584

Repair Difficulty:

Easy

Time Spent Repairing:

30-60 minutes

Tools Used:

Socket set, Inch pound torque wrench

Blown head gasket

Remove valve cover
Loosen rocker arms
Remove push rods
Remove intake and exhaust
Remove head bolts and head
Clean mating surfaces
Reassemble

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Lawn Tractor

Parts Used:

Exhaust Gasket - 692236

Inlet Seat - 690577

Float Valve Needle - 231855S

Float Bowl Gasket - 281165S

Gasket-Intake - 272554S

Breather Gasket - 27803S

Repair Difficulty:

Medium

Time Spent Repairing:

1-2 hours

Tools Used:

Screwdriver, Pliers, Socket set, Wrench Set, tap to remove seat in carb

carburetor leaking gas into crankcase

remove carburetor and float bowl and float and needle valve tap inside of seat in carburetor with a 1/4 twenty tap then threaded bolt in and then pulled out old seat and then tapped in new seat with a punch until it hits home at bottom reassemble carburetor and put back on engine

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Lawn Tractor

Parts Used:

Crankcase Gasket - 697110

Oil Seal - 795387

Exhaust Gasket - 692236

Rod-- Connecting - 794571

Cylinder Head Gasket - 794114

Repair Difficulty:

Easy

Time Spent Repairing:

More than 2 hours

Tools Used:

Screwdriver, Pliers, Power Drill, Socket set, Wrench Set, Nutdriver, Adjustable Wrench, torque wrench-ring compressor-feeler gauge

connecting rod went bad

completely disassembled engine except for crank and flywheel and reassembled using new parts and gaskets I also reseated the valves while the head was off

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Lawn Tractor

Parts Used:

Exhaust Gasket - 692236

Repair Difficulty:

Easy

Time Spent Repairing:

More than 2 hours

Tools Used:

Socket set, Wrench Set, Feeler gauges. Brass brush to clean head

My Scott tractor equipped with a Briggs Intel engine is 20 years old and had a blown head gasket for the last 8 years or so. I replaced the head gasket, intake gasket, exhaust gasket and valve cover

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Reviews

Average Rating (out of 5):

8 Reviews

Click to filter by ratings:

5 stars

4 stars

3 stars

2 stars

1 stars

Sort by:

Highest Rating
Most Recent

< PREV

NEXT >

Exhaust gasket

It was my first time doing repairs on my riding lawn mower, it turned out easy! Thanks for your help

Guest - October 2, 2022 Verified Purchase

Worked and fit was great

Great service

Anonymous - June 20, 2022 Verified Purchase

Head gasket replacement

Parts came on time and fit properly. Engine running great again.

Guest - April 13, 2020 Verified Purchase

Easy repair

Excellant condition and fit

Guest - December 3, 2019 Verified Purchase

Repair parts

The parts all worked perfect.

Guest - October 10, 2019 Verified Purchase

Correct part

Correct part.

Guest - July 12, 2019 Verified Purchase

Slow and abused

Ordered on a Tuesday, recieved the following Monday. One of the gaskets had creases in it from being bent while being shoved into the mailing envelope.

Guest - August 14, 2019 Verified Purchase

ereplacementparts DOES NOT have an effective escalation process (as well as other problems)

Customer service folks are great, BUT... I ordered some mower gaskets, including head gasket. They came in a bubble envelope and head gasket was creased. CS was helpful and ordered another part with "note to shipping" not to use just bubble envelope. 5 days later, got 2nd part in bubble envelope and creased like a taco. They got me another (with another note to shipping) and next day shipped the part. 3rd part arrived in bubble envelope and was creased. CS repeated process again with next day ship. Did not get the 4rth part and called to follow up and found that it was ON HOLD to ensure proper shipping. Got it 2 days later. Yes, 4th part arrived creased in bubble enveloped. Called corporate to speak to the man (David Fairbanks). Was told that he "always returns calls". Never heard from him (obviously, his time is more valuable than mine), but 5th part showed up in a box with paper (cardboard in bubble envelope would have been better). Luckily, it was OK. 17 days later and 2 hours of my time on phone and shipping back creased parts. David, send me a ticket and cover my expenses and I can come out and fix these problems for you in 2 days. Add up all the labor and shipping cost you have in getting me (just one customer) one good part and you should be able to realize it would be money well spent. BTW, I am well qualified to handle this for you. THANK YOU TO ALL MY NEW FRIENDS IN ereplacementparts CUSTOMER SERVICE. YOU FOLKS ARE GREAT.

Guest - October 3, 2019 Verified Purchase

Verified Purchase

eReplacementParts Team

Sort by:

Highest Rating
Most Recent

< PREV

NEXT >

Product Information