Medium
30-60 minutes
This item is an authentic Echo replacement part that has been sourced from the original manufacturer to be used with trimmers, blowers, and pruners. The carburetor is used to supply the engine with a mixture of air and fuel in a proper ratio. Over time ethanol in gasoline can build up deposits and clog fuel passageways. This will lead to an improper fuel ratio causing the engine to idle at fluctuating RPM's, or can cause the engine to run then abruptly stop, or not start at all. If this occurs cleaning and rebuilding the carburetor may be necessary. This kit includes all the recommended parts to be replaced when cleaning the carburetor. The kit is sold complete with all the items that are photographed.
Repair Kit 12530042030
OEM part for: Echo, Little Wonder
Part Number: 12530042030
$16.74
In Stock
Ships within 1 business day 
Jump To:
Frequently Purchased Together ?
Compatibility
This Repair Kit will fit the following 45 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Echo
Little Wonder
Show More Compatible ModelsThis item works with the following types of products:
- Grass Trimmer Parts
- Trimmer Parts
- Pruner Parts
- Vacuum Parts
- Edger Parts
- Hedge Trimmer Parts
- Blower Parts
This part replaces obsolete part #: 12530242030
Repair Videos ?
Articles:
|
Filthy Filters? This article will show you how to install a filter kit on an Echo SRM-225 trimmer....
May 27, 2015
|
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
1
4 stars
1
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Carb repair kit delivery was quick.
The parts and gaskets are hi quality and very easy to install. Put my Echo trimer back together but it still ran poorly. Not the fault of the new carb kit. I had a plugged spark arrester screen. A word of advice, if your two stroke engine has low power and won’t rev up. Check the spark arrester before blaming the carburetor.
Guest -
September 21, 2021
Verified Purchase
Worked as expected.
The order arrived in time and was in great condition.
Raymond -
July 31, 2021
Verified Purchase
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Repair Kit
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Trimmer would not start
Michael - May 19, 2016
👍 3 of 3 people found this instruction helpful
Tool Type
Trimmer
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Carb cleaner
Parts Used
Watched your You Tube video on "How to Rebuild a Two Cycle/Two Stroke Engine Carburetor" . And took reference pictures with cell phone as I took carb apart and after cleaning unit just put back together with kit parts. Thanks.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Used Blower would not run.
LOUIS - February 24, 2019
Tool Type
Blower
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Pliers, Wrench Set, Nutdriver
Parts Used
1. removed Carburetor
2. Removed fuel lines, grommet from Fuel Tank
3. Drained all fuel and sediment from tank
4. Disassembled, cleaned all carburetor parts
5. Bought a primer bulb retail; none was included in kit
6. Cut new gasket to Intake; none was included in repair kit.
7. Reassembled Carburetor; Would start, not run with fresh fuel.
8. Watched YouTube video on this carburetor
9. Reassembled carburetor again, carefully Blowing Starting Ether through all passages
10. Reinstalled Carburetor & fuel lines, started and ran; adjusted mixture screws.
2. Removed fuel lines, grommet from Fuel Tank
3. Drained all fuel and sediment from tank
4. Disassembled, cleaned all carburetor parts
5. Bought a primer bulb retail; none was included in kit
6. Cut new gasket to Intake; none was included in repair kit.
7. Reassembled Carburetor; Would start, not run with fresh fuel.
8. Watched YouTube video on this carburetor
9. Reassembled carburetor again, carefully Blowing Starting Ether through all passages
10. Reinstalled Carburetor & fuel lines, started and ran; adjusted mixture screws.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Blower wouldn't run
herb - September 26, 2018
Tool Type
Blower
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers
Removed the old carburetor cleaned it and rebuilt it and replaced the fuel lines and purge bulb. Thank goodness for the you-tube repair video
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Had not been started in 10 years
Harrell - March 22, 2018
Tool Type
Trimmer
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver
Removed carburetor to remove and replace lines to fuel tank, fuel filter, grommet, primer bulb and diaphragm. First time to do this job and it was proved to simple.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Carb was not metering fuel properly, and needed rebuilding.
David - July 16, 2017
Tool Type
Trimmer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers
Parts Used
- Starter Cover Screw - V202000830
- Fuel Grommet - 13211546730
- Vent Tube - V471001201
- Fuel Tank Vent - A356000031
- Purge Bulb - P005003120
- Fuel Return Tube - 13201056330
- Screw - 90023805016
- Fuel Line - V471001191
- Guard-top - 15991254130
- Cover-engine - 10151448930
- Shield Kit - P021053450
- Tank-fuel - 13100544332
- Repair Kit - 12530042030
- Lid-air Cleaner - 13030206561
- Air Cleaner Case Assembly - P021002921
- Label-choke - 89012106360
Took off the carburetor and disassembled it completely. Cleaned the bare metal body with carb cleaner and blew it dry with compressed air. Rebuilt it with the gasket and reed kit, reinstalled it and then put on the new fuel tank, fuel filter, air filter, tank grommet and new fuel and vent lines. Installed new engine cover, spark plug, vent for fuel tank and head guard.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Would only run with the choke closed.
Timothy - July 16, 2017
Tool Type
Trimmer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Air gun
The carb rebuild kit solves the not running correctly. The grommet fixed the fuel leak out of the fuel tank when it was on the ground.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Weed eater would not crank.
Matthew - September 8, 2016
Tool Type
Trimmer
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Pliers
Basically I disassembled the weed eater. And rebuilt it using the parts I purchased.
A fairly straight forward process. Took pictures along the way to have reference when re-assembling.
A fairly straight forward process. Took pictures along the way to have reference when re-assembling.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tiller would not rev up after starting.
Jack - July 6, 2016
Tool Type
Cultivator
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Wrench Set, Spark plug socket
1. Installed the new gas filter inside the tank.
2. Installed new gas line and the grommet on the tank.
3. Rebuilt carburetor with the kit.
4. installed new spark plug
Ran well after installing the above parts.
2. Installed new gas line and the grommet on the tank.
3. Rebuilt carburetor with the kit.
4. installed new spark plug
Ran well after installing the above parts.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
