Watch The
Repair Video

Shield Kit

Part Number: P021053450

9 Reviews

Order within the next 10 hours

and your part ships today!

Questions & Answers

Repair Instructions

*This part replaces obsolete part #: P021047400, P021015661, P021001392, P021001393, P021001391 and P021015660.

Product Information

Description:

It is an authentic item that is supplied by the original equipment manufacturer for use with Echo handheld lawn and garden equipment. The purpose of a shield is to direct the trimmings away from a user, please make sure to refer to the owners manual for the correct application of this component. It provides an identical replacement for a missing or a damaged part that was included with a new unit. This high-quality shield is sold individually, keep in mind the kit includes the plastic shield, the line-cutting knife, and the hardware to secure them.

Warning: California's Proposition 65

Compatibility

This part is compatible with the following machines:

Echo

Expand the 150+ compatible machines

Questions & Answers

Sort by

No questions have been asked yet

Repair Instructions: Submitted by Customers Like You

1 of 1 people found this instruction helpful

Tool Type:

Trimmer

Parts Used:

Shield Kit - P021053450

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, Pliers

Had no shield

Took old screws out to put shield kit on. Had no shield kit before.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

1 of 1 people found this instruction helpful

Tool Type:

Trimmer

Parts Used:

Shield Kit - P021053450

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver

Nothing, perfect fit

Removed trimmer head, installed guard according to instructions. Nothing could be easier.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Trimmer

Parts Used:

Shield Kit - P021053450

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

, Torx bit

The guard was broken

1. Removed the trimmer head
2. Remove the 3 Torx head bolts holding the guard retainer
3. Remove guard retainer and broken guard
4. Clean trimmer head
5. install guard, retainer and secure with 3 new Torx head bolts using Blue thread locker.
6. Reinstall trimmer head and you are finished.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Trimmer

Parts Used:

Shield Kit - P021053450

Tune-Up Kit - 90152Y

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Socket set, Adjustable Wrench

Broken debris shield

Removed the spool and two bolts. Removed broken shield and installed the new one. Video on the site was very helpful.
Performed a quick tune-up using the kit: new air filter, spark plug, then the fuel filter. Runs like a new machine!

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Trimmer

Parts Used:

Wing Bolt - 21041752730

Air Filter Cover - 13031306563

Shield Kit - P021053450

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, A punch to unscrew the trimmer head

The filter cover and trimmer head guard was cracked.

Replaced the carb filter cover is just remove the wing nut and replace. Then I used a 3/16” punch to hold the shaft to unscrew the trimmer head (backwards threads). Next - remove three screws holding the plastic trimmer head guard. Replace guard and reassemble This guard somewhat protects you from flying debris, but also has a blade that cuts the trimmer string to the right length. That blade part broke of mine!

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Trimmer

Parts Used:

Shield Kit - P021053450

Front Handle Asy - P021012390

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, Pliers, Socket set

The plastic shield was cracked and the handle was pretty worn down, along with the trimmer head being cracked apart.

1. Removed and replaced the handle.
2. Took off bottom trimmer head piece that holds trimmer line.
3. Stuck a Phillips head screwdriver in the hole through the cutout in the shield.
4. Used pipe wrench pliers on smallest adjustment to turn shaft, that trimmer head sits on, clockwise.
5. Replaced plastic shield and metal bracket.
6. Re-installed trimmer head.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Trimmer

Parts Used:

Shield Kit - P021053450

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver

Screws from shield kit had come loose and movement of the shield was causing the engine to big.

Very easy to replace, the past fit perfectly and now works great.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Trimmer

Parts Used:

Shield Kit - P021053450

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver, none

shed was badly damaged

1 remove old shield
2 installed new shield
3 rook longer to fine the screwdriver than to make the repair

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Trimmer

Parts Used:

Starter Cover Screw - V202000830

Fuel Grommet - 13211546730

Vent Tube - V471001201

Fuel Tank Vent - A356000031

Purge Bulb - P005003120

Fuel Return Tube - 13201056330

Screw - 90023805016

Fuel Line - V471001191

Guard-Top - 15991254130

Cover-Engine - 10151448930

Shield Kit - P021053450

Tank-Fuel - 13100544332

Repair Kit - 12530042030

Lid-Air Cleaner - 13030206561

Air Cleaner Case Assembly - P021002921

Label-Choke - 89012106360

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, Pliers

Carb was not metering fuel properly, and needed rebuilding.

Took off the carburetor and disassembled it completely. Cleaned the bare metal body with carb cleaner and blew it dry with compressed air. Rebuilt it with the gasket and reed kit, reinstalled it and then put on the new fuel tank, fuel filter, air filter, tank grommet and new fuel and vent lines. Installed new engine cover, spark plug, vent for fuel tank and head guard.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Trimmer

Parts Used:

Shield Kit - P021053450

Repair Difficulty:

Medium

Time Spent Repairing:

30-60 minutes

Tools Used:

Screwdriver, Socket set

Missing line shield on trimmer

Removed blade attachment.
Installed line sheild

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Reviews

Average Rating (out of 5):

9 Reviews

Click to filter by ratings:

5 stars

4 stars

3 stars

2 stars

1 stars

Sort by:

Highest Rating
Most Recent

< PREV

NEXT >

Fast delivery and exact part

The website was easy to follow for me to find the exact part I needed without having the part number. I was able to quickly find and order the shield I needed for my Trimmer and I got it in 4 days. Thank you!

Guest - July 7, 2022 Verified Purchase

Great service

Part was what I ordered and was here in a timely manner

Guest - June 12, 2021 Verified Purchase

Parts for my trimmers

The parts arrived early and in perfect condition. They were a perfect fit on the trimmer

Enrique - November 30, 2019 Verified Purchase

Shield

Just what I ordered. Fits perfect !

Guest - August 29, 2019 Verified Purchase

Was delighted that you had the part we needed as a replacement part for a weed trimmer.

It was so easy to order online, the delivery was fairly quick, and definitely the correct part. Could probably have put it on ourselves with the help of YouTube, but my husband brought it to a neighboring town lawn mower sales business, and the gentleman put it on at no charge. That was very kind of him. Thank you for being there for us.

Guest - August 21, 2019 Verified Purchase